Your success in Cisco 400-201 is our sole target and we develop all our 400-201 braindumps in a way that facilitates the attainment of this target. Not only is our 400-201 study material the best you can find, it is also the most detailed and the most updated. 400-201 Practice Exams for Cisco CCIE Service Provider 400-201 are written to the highest standards of technical accuracy.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-201 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 400-201 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/400-201-exam-dumps.html
Q51. DRAG DROP
Drag and drop Evolved Packet Core functional entities on the left to the correct description on the right.
Answer:
Q52. A Service Provider wants to extend MPLS WAN endpoints in the cloud at the edge of a customer network within the cloud. Which platform will meet this requirement?
A. Cisco NX-OS
B. Cisco CSR1000v
C. Cisco ISR Routers running IOS
D. Cisco CRS-1
E. Cisco ASR Routers running IOS-XR
Answer: B
Explanation: http://www.cisco.com/c/en/us/products/collateral/routers/cloud-services-router-1000v-series/datasheet-c78-733443.html
Q53. Cisco IOS XR has implemented a nonstop routing feature so that when RP failover occurs, the routing information can be recovered locally. Which protocol does not support the NSR feature?
A. OSPF
B. LDP
C. BGP
D. IS-IS
E. RSVP
Answer: E
Q54. Refer to the exhibit. R3 cannot install a route to R1-R2 subnet 2001:1:155:12::/64. Which action resolves this issue?
A. Add the redistribute ospf 1 include-connected command under the ipv6 router eigrp 10 process.
B. For the OSPF process, add the no shutdown command.
C. For prefix-list OSPF_INTO_EIGRP seq 20, replace the prefix with 2001:155:1:12::/64.
D. For route-map OSPF_INTO_EIGRP, add the set metric 1000 1 255 1 1500 command.
Answer: A
Explanation: http://www.ciscopress.com/articles/article.asp?p=2273507&seqNum=8
https://supportforums.cisco.com/document/12110191/understand-include-connected-keyword-use-ipv6-redistribution
Q55. A network engineer wants to deploy a solution that allows for 200 DS1 s and 100 DS0s that are multiplexed to a single interface on a Cisco 7600 Series Router. Which interface type satisfies this requirement?
A. Channelized T3/E3 (DS0)
B. Channelized OC-12/STM-4
C. OC-12/STM-4
D. OC-48c/STM-16
Answer: B
Q56. A client has an MPLS inter-AS implementation that is required to have QoS deployed between ASBRs based on IP packet. At the same time, the client requires minimization of the routing configuration between ASBRs for better scalability. Which MPLS inter-AS option can achieve this goal?
A. Option A
B. Option B
C. Option C
D. Option AB
Answer: D
Q57. Refer to the exhibit. Two MPLS TE tunnels are configured with a total bandwidth guarantee of 100 Mbps. However, Tunnel 1 has a requirement to have one-fifth of this total bandwidth. Which two configurations accomplish this goal? (Choose two.)
A. Configure tunnel mpls traffic-eng bandwidth 20000 under the Tunnel 1 interface.
B. Configure bandwidth 20000 under the Tunnel 1 interface.
C. Configure tunnel mpls traffic-eng bandwidth 80000 under the Tunnel 2 interface.
D. Configure bandwidth 80 Mbps under physical interfaces in the path PE1-P2-PE2.
E. Configure bandwidth 20 Mbps under physical interfaces in the path PE1-P1-PE2
F. Configure bandwidth 80000 under the Tunnel 2 interface.
Answer: A,C
Explanation: See Configuration Guide
Q58. What is NETCONF?
A. It is a standard for installing, manipulating and deleting configuration of network devices.
B. it is a Cisco proprietary solution to help remove the time, cost and manual steps involved in network element configuration.
C. It is data modeling language, to help remove the time, cost and manual steps involved in network element configuration.
D. It is a new recommendation which writes device specific CLI scripts while keeping flexibility in a vendor dependence environment.
Answer: A
Explanation: http://www.tail-f.com/education/what-is-netconf/
Q59. An R1 router requires an equal load balancing to reach the prefix 192.168.0.0/16 over two exit points: through R2 and R3 routers. Which two options must be configured on the R1 router to achieve this goal? (Choose two.)
A. The BGP maximum path feature must be configured on R1.
B. The BGP PIC core must be enabled on R1
C. Weight, local-pref, MED, as-path length, origin, and the BGP next-hop IGP cost must be the same for the R2 and R3 IBGP updates to R1.
D. The BGP Link Bandwidth feature must be applied on R1.
E. BGP extended community exchange must be enabled between IBGP neighbors.
Answer: D,E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2s/feature/guide/fsbgplb.html#wp1058373
Q60. A network engineer wants to decrease the convergence time of a network that is running integrated IS-IS as an IGP, at the expense of bandwidth and CPU usage. Which two configuration tasks achieve this goal? (Choose two.)
A. Configure the hold time to be 1 second.
B. Configure the hello interval to be minimal.
C. Ensure that hello-padding is disabled.
D. Ensure that the hello multiplier is set to 3.
E. Configure the hello multiplier to be 3.
Answer: B,D
Explanation:
https://books.google.co.in/books?id=u_XOQy4cBkgC&pg=PA184&lpg=PA184&dq=what+is +hello+multiplier+minimal+time+in+integrated+is-is&source=bl&ots=XqDfyO3AVT&sig=NHY0L-k-nhHrg7h6i3RWorttgcE&hl=en&sa=X&ved=0CDAQ6AEwA2oVChMIhfCI5ZXTxwIVQwaOC h3PfQea#v=onepage&q=what%20is%20hello%20multiplier%20minimal%20time%20in%20 integrated%20is-is&f=false
