Cause all that matters here is passing the Cisco 640-692 exam. Cause all that you need is a high score of 640-692 Supporting Cisco routing and Switching Network Devices exam. The only one thing you need to do is downloading Certleader 640-692 exam study guides now. We will not let you down with our money-back guarantee.
Online 640-692 free questions and answers of New Version:
NEW QUESTION 1
When using a modem to provide out-of-band access to a Cisco router, which cable type is used to connect the wall jack to the modem?
- A. DB-25 to RJ-11
- B. RJ-11 to Rj-11
- C. RJ-45 to RJ-45
- D. RJ-11 to RJ-45
- E. RJ-11 to DB-9
Answer: B
NEW QUESTION 2
Refer to the exhibit.
Into which port do you insert the card?
- A. ATM
- B. Gigabit Ethernet
- C. Serial
- D. Ethernet
Answer: B
NEW QUESTION 3
Which three of the following describe Fast Ethernet? (Choose three)
- A. 1QBASE-T H B
- B. 100BASE-T
- C. 10-Mb/s speed
- D. 100-Mb/s speed
- E. requires Category 3 or higher UTP cabling
- F. requires Category 5 or higher UTP cabling
Answer: BDF
NEW QUESTION 4
Which two modules can be plugged into internal advanced integration module (AIM) slots on a Cisco router? (Choose two)
- A. Virtual Private Network Module
- B. Intrusion Detection System Module
- C. Packet Voice Digital Signal Processor Module
- D. LAN Switching Module
- E. Voice Interface Module
Answer: AB
NEW QUESTION 5
Which layer of the IOS model defines how data is formatted for transmission and how access to the physical media is controlled?
- A. Physical
- B. Data link
- C. Network
- D. Transport
Answer: B
NEW QUESTION 6
Refer to the exhibit.
Hosts in network 192.168.2.0 are unable to reach hosts in network 192.168.3.0. Based on the output from RouterA, what are two possible reasons for the failure? (Choose two.)
- A. The cable that is connected to S0/0 on RouterA is faulty.
- B. Interface S0/0 on RouterB is administratively down.
- C. Interface S0/0 on RouterA is configured with an incorrect subnet mask.
- D. The IP address that is configured on S0/0 of RouterB is not in the correct subnet.
- E. Interface S0/0 on RouterA is not receiving a clock signal from the CSU/DSU.
- F. The encapsulation that is configured on S0/0 of RouterB does not match the encapsulation that is configured on S0/0 of RouterA.
Answer: EF
NEW QUESTION 7
Which command initiates copying the saved configuration of a Cisco device to a TFTP server?
- A. copy running-config tftp
- B. copy startup-config tftp
- C. copy tftp running-config
- D. copy tftp startup-config
Answer: B
NEW QUESTION 8
Which type of memory is necessary for a router to boot?
- A. DRAM
- B. PVDM
- C. NVRAM
- D. VRAM
Answer: A
NEW QUESTION 9
Which two pieces of information does the show ip interface brief command display? (Choose two)
- A. Encapsulation type
- B. Interface status
- C. Layer 2 address
- D. Layer 3 address
- E. Keep alive
Answer: BD
NEW QUESTION 10
Which IEEE standard protocol is initiated as a result of successful DTP completion in a switch over Fast Ethernet?
- A. 802.3ad
- B. 802.1w
- C. 802.1D
- D. 802.1Q
Answer: D
NEW QUESTION 11
Which two of the following are features of NVRAM on a Cisco device? (Choose two)
- A. Stores startup configuration
- B. Stores running configuration
- C. Stores routing tables
- D. Stores decompressed IOS software image
- E. Erased when device is rebooted
- F. Not erased when device is rebooted
Answer: AF
NEW QUESTION 12
What one of the feature is associated with single-mode fiber-optic cable?
- A. a single strand of glass fiber
- B. stored less bandwidth
- C. cost is less than multimode fiber
- D. operates over less distance than multimode fiber
Answer: A
NEW QUESTION 13
Which two of the following statements are true about a switch? (Choose two)
- A. It is a repeater.
- B. It is a data link layer device.
- C. It will forward the frame out all ports when it receives a broadcast from a host.
- D. It reads the destination MAC address to forward traffic out the appropriate port.
- E. It acts as an amplifier.
Answer: BD
NEW QUESTION 14
Which two locations can be configured as a source for the IOS image in the boot system command? (Choose two.)
- A. RAM
- B. NVRAM
- C. flash memory
- D. HTTP server
- E. TFTP server
- F. Telnet server
Answer: CE
NEW QUESTION 15
DRAG DROP
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 16
Which three of the following statements are true about a router? (Choose three)
- A. It forwards broadcast frames.
- B. It interconnects multiple networks together.
- C. It chooses the best route for your data to travel.
- D. It manages and analyzes a company's database.
- E. It divides a network into separate broadcast domains.
Answer: BCE
NEW QUESTION 17
While performing password recovery on a Cisco device, the configuration register should be which value in order to bypass loading the startup configuration?
- A. 0x2102
- B. 0x2112
- C. 0x2122
- D. 0x2142
Answer: D
NEW QUESTION 18
Which two pairs of LAN Ethernet devices use an RJ-45 Straight-through cable? (Choose two)
- A. Switch to switch
- B. Switch to router
- C. Switch to server
- D. Router to router
- E. Switch to hub
Answer: BC
NEW QUESTION 19
DRAG DROP
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
The correct answer is: Router(boot)# Router(config-if)# Router(config)# Router#
Rommon> Router>
NEW QUESTION 20
Which of the following command display the saved configuration file?
- A. show configuration
- B. show file system
- C. show running-config
- D. start config
Answer: A
NEW QUESTION 21
Which port displays the bootup process on a Cisco device?
- A. ATM
- B. BVI
- C. Console
- D. Ethernet
Answer: C
NEW QUESTION 22
Which step in the router boot process searches for an IOS image to load into the router?
- A. bootstrap
- B. POST
- C. mini-IOS
- D. ROMMON mode
Answer: A
NEW QUESTION 23
Which of the following is a DTE device?
- A. router
- B. CSU/DSU
- C. cable modem
- D. DSL modem
Answer: A
NEW QUESTION 24
......
Thanks for reading the newest 640-692 exam dumps! We recommend you to try the PREMIUM 2passeasy 640-692 dumps in VCE and PDF here: https://www.2passeasy.com/dumps/640-692/ (92 Q&As Dumps)
