Proper study guides for Far out Microsoft Implementing Microsoft Azure Infrastructure Solutions certified begins with Microsoft 70 533 exam dumps pdf preparation products which designed to deliver the Simulation 70 533 certification questions by making you pass the azure 70 533 test at your first time. Try the free exam ref 70 533 demo right now.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-533 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-533 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-533-exam-dumps.html
Q41. You manage a cloud service that supports features hosted by two instances of an Azure virtual machine (VM).
You discover that occasional outages cause your service to fail.
You need to minimize the impact of outages to your cloud service.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Deploy a third instance of the VM.
B. Configure Load Balancing on the VMs.
C. Redeploy the VMs to belong to an Affinity Group.
D. Configure the VMs to belong to an Availability Set.
Answer: B,D
Explanation: Adding your virtual machine to an availability set helps your application stay available during network failures, local disk hardware failures, and any planned downtime..
Combine the Azure Load Balancer with an Availability Set to get the most application resiliency. The Azure Load Balancer distributes traffic between multiple virtual machines..
http://azure.microsoft.com/en-gb/documentation/articles/virtual-machines-manage-availability/
Reference: Manage the availability of virtual machines, Understand planned versus unplanned maintenance
Q42. You manage an Azure virtual network that hosts 15 virtual machines (VMs) on a single subnet which is used for testing a line of business (LOB) application. The application is deployed to a VM named TestWebServiceVM.
You need to ensure that TestWebServiceVM always starts by using the same IP address. You need to achieve this goal by using the least amount of administrative effort.
What should you do?
A. Use the Management Portal to configure TestWebServiceVM.
B. Use RDP to configure TestWebServiceVM.
C. Run the Set-AzureStaticVNetIP PowerShell cmdlet.
D. Run the Get-AzureReservedIP PowerShell cmdlet.
Answer: C
Explanation: Specify a static internal IP for a previously created VM
If you want to set a static IP address for a VM that you previously created, you can do so by using the following cmdlets. If you already set an IP address for the VM and you want to change it to a different IP address, you’ll need to remove the existing static IP address before running these cmdlets. See the instructions below to remove a static IP. For this procedure, you’ll use the Update-AzureVM cmdlet. The Update-AzureVM cmdlet restarts the VM as part of the update process. The DIP that you specify will be assigned after the VM restarts. In this example, we set the IP address for VM2, which is located in cloud service StaticDemo.
Get-AzureVM -ServiceName StaticDemo -Name VM2 | Set-AzureStaticVNetIP -IPAddress
192.168.4.7 | Update-AzureVM
Reference: Configure a Static Internal IP Address (DIP) for a VM URL: http://msdn.microsoft.com/en-us/library/azure/dn630228.aspx
Q43. DRAG DROP
You administer an Azure SQL database named contosodb that is running in Standard/S1 tier. The database is in a server named server1 that is a production environment. You also administer a database server named server2 that is a test environment. Both database servers are in the same subscription and the same region but are on different physical clusters.
You need to copy contosodb to the test environment.
Which three steps should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q44. Your company is launching a public website that allows users to stream videos.
You upload multiple video files to an Azure storage container.
You need to give anonymous users read access to all of the video files in the storage container.
What should you do?
A. Edit each blob's metadata and set the access policy to Public Blob.
B. Edit the container metadata and set the access policy to Public Container.
C. Move the files into a container sub-directory and set the directory access level to Public Blob.
D. Edit the container metadata and set the access policy to Public Blob.
Answer: C
Explanation:
By default, the container is private and can be accessed only by the account owner. To allow public read access to the blobs in the container, but not the container properties and metadata, use the "Public Blob" option. To allow full public read access for the container and blobs, use the "Public Container" option.
Q45. HOTSPOT
You manage two websites for your company. The sites are hosted on an internal server
that is beginning to experience performances issues due to high traffic.
You plan to migrate the sites to Azure Web Sites.
The sites have the following configurations:
In the table below, identity the web hosting plan with the lowest cost for each site. Make only one selection in each column.
Answer:
Q46. DRAG DROP
You have an Azure Virtual Network named fabVNet with three subnets named Subnet-1, Subnet-2 and Subnet-3. You have a virtual machine (VM) named fabVM running in the fabProd service.
You need to modify fabVM to be deployed into Subnet-3. You want to achieve this goal by using the least amount of time and while causing the least amount of disruption to the existing deployment.
What should you do? To answer, drag the appropriate Power Shell cmdlet to the correct location in the Power Shell command. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q47. HOTSPOT
You administer an Azure Active Directory (Azure AD) tenant.
You add a custom application to the tenant.
The application must be able to:
. Read data from the tenant directly.
. Write data to the tenant on behalf of a user. In the table below, identify the permission that must be granted to the application. Make only one selection in each column.
Answer:
Q48. You administer a Windows Server virtual machine (VM).
You upload the VM to Azure.
You need to ensure that you are able to deploy the BGInfo and VMAccess extensions.
What should you do?
A. Select the Install the VM Agent checkbox while provisioning a VM based on your uploaded VHD.
B. Select the Enable the VM Extensions checkbox while provisioning a VM based on your uploaded VHD.
C. Install the VM Agent MSI and execute the following Power Shell commands: $vm = Get-AzureVM -serviceName $svc -Name $name $vm.VM.ProvisionGuestAgent = $true Update-AzureVM -Name Sname -VM $vm.VM -ServiceName $svc
D. Install the VM Agent MSI and execute the following Power Shell commands: $vm = Get-AzureVM -serviceName $svc -Name $name Set-AzureVMBGInfoExtension -VM $vm.VM Set-AzureVM Access Extension -VM $vm.VM Update-AzureVM -Name Sname -VM $vm.VM -ServiceName $svc
Answer: C
Explanation: The VM Agent can be enabled by manually downloading and installing the VM Agent (either the Windows or Linux version) on an existing VM instance and then setting the ProvisionGuestAgent value to true using Powershell or a REST call. (If you do not set this value after manually installing the VM Agent, the addition of the VM Agent is not detected properly.) The following code example shows how to do this using PowerShell where the $svc and $name arguments have already been determined.
$vm = Get-AzureVM –serviceName $svc –Name $name $vm.VM.ProvisionGuestAgent = $TRUE Update-AzureVM –Name $name –VM $vm.VM –ServiceName $svc
Reference: VM Agent and VM Extensions Overview
Q49. You administer an Azure Storage account named contoso storage. The account has queue containers with logging enabled.
You need to view all log files generated during the month of July 2014.
Which URL should you use to access the list?
A.
http://contosostorage.queue.core.windows.net/$logs? restype=container&comp=list&prefix=queue/2014/07
B.
http://contosostorage.queue.core.windows.net/$files? restype=container&comp=list&prefix=queue/2014/07
C. http://contosostorage.blob.core.windows.net/$files?
restype=container&comp=list&prefix=blob/2014/07
D. http://contosostorage.blob.core.windows.net/$logs? restype=container&comp=list&prefix=blob/2014/07
Answer: A
Explanation: http://msdn.microsoft.com/library/azure/hh343262.aspx
Q50. You manage two datacenters in different geographic regions and one branch office.
You plan to implement a geo-redundant backup solution.
You need to ensure that each datacenter is a cold site for the other.
You create a recovery vault. What should you do next?
A. Install the provider.
B. Upload a certificate to the vault.
C. Generate a vault key.
D. Set all virtual machines to DHCP.
E. Prepare System Center Virtual Machine Manager (SCVMM) servers.
F. Create mappings between the virtual machine (VM) networks.
Answer: C
Explanation: . Within the Azure Portal screen, scroll down to Recovery Services (on the left menu), and click on “Create a New Vault” (this is where your VMs will be replicated to) which will bring up a Data Services / Recovery Services / Site Recovery Vault option, select Quick Create . For the name of the Vault, give it something you’d remember, in my case, I’ll call it RandsVault, and I’ll choose the Region West US since I’m in the Western United States, then click Create Vault . Once the Vault has been created, click on the Right Arrow next to the name of your vault. Under Setup Recovery, choose “Between an on-premise site and Microsoft Azure” so that you are telling the configuration settings that you are going to be replicating between your on-premise datacenter and Azure in the cloud. . You will now see a list of things you need to do which the first thing is to create a key exchange of certificates between Microsoft Azure and your VMM server.
Reference: Leveraging Microsoft Azure as your disaster recovery/failover data center
