Exam Code: 70 680 practice test (Practice Exam Latest Test Questions VCE PDF)
Exam Name: TS:Windows 7,Configuring
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass microsoft 70 680 Exam.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-680 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-680-exam-dumps.html
Q261. - (Topic 2)
You have two computers named Computer1 and Computer2 that run Windows 7. Both computers are members of an Active Directory domain.
Windows Remote Management (WinRM) is enabled on both computers.
You need to remotely create additional disk volumes on Computer1 from Computer2.
What should you do?
A. On Computer2, run Winrs and then run Diskpart.
B. On Computer2, run Winrs and then run Diskmgmt.msc.
C. On Computer1, install the Telnet Client and then run Diskpart from Computer2.
D. On Computer1, install the Telnet Client and then use Disk Management from Computer2.
Answer: A
Explanation:
Winrs You can use WinRS to execute command-line utilities or scripts on a remote computer. To use WinRS, open a command prompt and prefix the command that you want to run on the remote computer with the WinRS –r: RemoteComputerName command. For example, to execute the Ipconfig command on a computer named Aberdeen, issue the command: WinRS –r:Aberdeen ipconfig The Windows Remote Management service allows you to execute commands on a remote computer, either from the command prompt using WinRS or from Windows PowerShell. Before you can use WinRS or Windows PowerShell for remote management tasks, it is necessary to configure the target computer using the WinRM command. To configure the target computer, you must run the command WinRM quickconfig from an elevated command prompt.
Diskpart: Microsoft command-line tool Diskpart is used to create and format volumes on the target computer.
Q262. - (Topic 1)
Which of the following operating systems support an offline migration using USMT? Choose three.
A. Windows 2000 Professional
B. Windows XP Professional
C. Windows Vista
D. Windows 7
Answer: B,C,D
Q263. DRAG DROP - (Topic 5)
You use a portable computer that has Windows 7 Home Premium installed. The portable computer has a scheduled backup of all libraries to run every day at midnight. Drive C is also configured with system protection.
You use an instant messaging application that saves chat data to a log file. The log file is stored in My Documents.
You install a new version of the application. You discover that the log file has been replaced with an empty file.
You need to restore the most recent version of the file that contains data.
What should you do? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q264. DRAG DROP - (Topic 6)
Your organization has a Windows Server 2008 R2 server and Windows 7 Professional computers.
Two groups require access to new applications. Each group uses a different application. You are adding 100 new computers to each group.
You need to configure Windows Firewall to allow each group to access its application.
Which four steps should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order. )
Answer:
Q265. - (Topic 2)
A user telephones your help desk. She has just accidentally deleted a file she was working on earlier that day.
You have configured her computer to carry out backups every evening, and you installed a new graphics driver two days ago.
How should you advise the user to retrieve her file?
A. Open the Backup And Restore console and restore the file from backup.
B. Use the Restore Previous Versions feature to restore the file.
C. Open her Recycle Bin, right-click the file, and choose Restore.
D. Perform a system restore.
Answer: C
Q266. HOTSPOT - (Topic 5)
You need to uninstall a Windows update from a computer that runs Windows 7.
Which Control Panel item should you use? (To answer, select the appropriate item in the Control Panel in the answer area.)
Answer:
Q267. - (Topic 3)
You have a computer that runs Windows 7.
You need to configure system image backups to meet the following requirements:
. Automatically create a system image every day without user intervention
. Retain multiple copies of the system image
Which type of backup destination should you use?
A. External hard disk drive
B. Network location
C. USB flash drive
D. Writeable DVD
Answer: A
Explanation: Explanation/Reference: Backup And Restore in Windows 7 supports backing up data files to CD-ROM, DVD-ROM, hard disk (including VHD files), or a network location. You can use Backup And Restore to write a System Image backup to an internal hard disk drive, an external hard disk drive (if formatted with the NTFS file system) and a network location. You cannot use Backup And Restore to write a System Image backup to a USB flash drive, a writable DVD, or a tape drive. You need to schedule client computers that store important data for automatic backup. After you first configure automatic file backup using the Backup And Restore console, Windows 7 regularly backs up your files. The first time a backup is performed, a full backup is done, including all important user documents. Subsequent backups are incremental, backing up only changed files. Older backups are discarded if the disk begins to run out of space.Scheduling Backups with the Backup And Restore Console Windows 7 Backup uses shadow copies to take a snapshot of your files, allowing the backup to completely back up files even if they are open. Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. You can select the following types of backup destination: An external hard drive External hard drives are more expensive to purchase than internal hard drives, although you need to balance this against the cost of fitting the internal drive. They can be removed and stored in a secure location. However, they are typically slower than internal hard drives and tend to be less reliable, mainly because they are by default formatted using FAT rather than NTFS. You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. Because it is easily removable, it is more likely that an external hard drive will be missing when a scheduled backup is required.
Network locationIf your computer is short of disk space, you can back it up to a network location on another computer or network storage. Note that this is not the same as the situation in a production environment, where users' Documents libraries are stored on a file server and an administrator backs up the file server. You can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise, and you need to provide credentials so that Windows Backup can access the network. Bear in mind that you can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise.USB flash drivesFlash drive memory is considerably less expensive and flash drive devices support much more memory than they did three or even two years ago. Nevertheless, they typically support a lot less memory than hard drives and quickly fill up if you needed to keep copies of older backups. You cannot save System Image backups to flash memory. A flash drive must be able to hold more than 1 GB if you want to save a backup on it. Flash drives can be stored offsite and are small and easy to carry. They are also easy to lose.
Q268. DRAG DROP - (Topic 4)
Your company network includes a Windows Server 2008 R2 server named Server1. You use a client computer named Client1 that has Windows 7 Enterprise installed. Both Computers are members of an Active Directory domain.
You want to automatically forward events from Client1 to Server1.
You need to configure the required source-initiated subscription.
What should you do? (To answer, drop the appropriate configuration step or configurations steps to the correct target or target computers in the answer area. An answer choice can be used once, more than once, or not at all.)
Answer:
Q269. - (Topic 2)
You have a computer that runs Windows 7. IPv6 is disabled on the computer.
The computer has the following IPv4 settings:
IP address: 10.1.1.193
Subnet mask: 25S.255.0.0
Default gateway: 10.1.1.194
. Preferred DNS server: 10.1.1.195
You need to ensure that the computer can only communicate with computers on the local subnet.
What should you do?
A. Delete the default gateway address.
B. Delete the preferred DNS server IP address
C. Configure the subnet mask to use 255.255.255.0
D. Configure the subnet mask to use 255.255.255.192
Answer: A
Explanation:
Why gateways work Default gateways are important to make IP routing work efficiently. In most cases, the router that acts as the default gateway for TCP/IP hosts--either a dedicated router or a computer that connects two or more network segments--maintains knowledge of other networks in the larger network and how to reach them. TCP/IP hosts rely on default gateways for most of their communication needs with hosts on remote network segments. In this way, individual hosts are freed of the burden of having to maintain extensive and continuously updated knowledge about individual remote IP network segments. Only the router that acts as the default gateway needs to maintain this level of routing knowledge to reach other remote network segments in the larger internetwork. If the default gateway fails, communication beyond the local network segment may be impaired. To prevent this, you can use the Advanced TCP/IP Settings dialog box (in Network Connections) for each connection to specify multiple default gateways. You can also use the route command to manually add routes to the routing table for heavily used hosts or networks.
Q270. - (Topic 4)
A company has client computers that run Windows 7 Enterprise.
You need to ensure that when Windows runs applications with elevated privileges, it enforces the Public Key Infrastructure (PKI) certification path validation for a given executable file.
What should you use to accomplish this goal?
A. the User Account Control Settings Control Panel window
B. the Services management console
C. Device Manager
D. Local Users and Groups
E. the icacls command
F. the Group Policy management console
G. the folder Properties window
H. share permissions
I. the netsh command
Answer: F
Explanation:
Besides changing the notification behavior of UAC, you can also control the behavior of the UAC by using local or group policies. Local policies are managed from each local computer while group policies are managed as part of Active Directory.
Follow these steps to change UAC settings: Click Start, type secpol.msc in the Search programs and files box, and press Enter. From the Local Security Policy tree, click Local Policies and then double-click Security Options The UAC policies are at the bottom of the list. To modify a setting, simply double-click on it and make the necessary changes.
