The Secret Of Microsoft AZ-303 Training

Your success in Microsoft AZ-303 is our sole target and we develop all our AZ-303 braindumps in a way that facilitates the attainment of this target. Not only is our AZ-303 study material the best you can find, it is also the most detailed and the most updated. AZ-303 Practice Exams for Microsoft AZ-303 are written to the highest standards of technical accuracy.

Check AZ-303 free dumps before getting the full version:

NEW QUESTION 1

You have an Azure subscription that contains a resource group named RG1. You have a group named Group1 that is assigned the Contributor role for RG1.
You need to enhance security for the virtual machines in RG1 to meet the following requirements:
• Prevent Group1 from assigning external IP addresses to the virtual machines.
• Ensure that Group1 can establish an RDP connection to the virtual machines through a shared external IP address.
What should you use to meet each requirement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-303 dumps exhibit

NEW QUESTION 2

You are implementing authentication for applications in your company. You plan to implement self-service password reset (SSPR) and multifactor authentication (MFA) in Azure Active Directory (Azure AD).
You need to select authentication mechanisms that can be used for both MFA and SSPR.
Which two authentication methods should you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

  • A. Short Message Service (SMS) messages
  • B. Authentication app
  • C. Email addresses
  • D. Security questions
  • E. App passwords

Answer: AB

Explanation:
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/concept-authentication-methods

NEW QUESTION 3

You have an Azure subscription.
You plan to deploy an app that has a web front end and an application tier.
You need to recommend a load balancing solution that meets the following requirements:
AZ-303 dumps exhibit Internet to web tier:
- Provides URL-based routing
- Supports connection draining
- Prevents SQL injection attacks
AZ-303 dumps exhibit Web tier to application tier:
- Provides port forwarding
- Supports HTTPS health probes
- Supports an availability set as a backend pool
Which load balancing solution should you recommend for each tier? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: An Azure Application Gateway that has a web application firewall (WAF)
Azure Application Gateway offers a web application firewall (WAF) that provides centralized protection of your web applications from common exploits and vulnerabilities. Web applications are increasingly targeted by malicious attacks that exploit commonly known vulnerabilities. SQL injection and cross-site scripting are among the most common attacks.
Application Gateway operates as an application delivery controller (ADC). It offers Secure Sockets Layer (SSL) termination, cookie-based session affinity, round-robin load distribution, content-based routing, ability to host multiple websites, and security enhancements.
Box 2: An internal Azure Standard Load Balancer
The internet to web tier is the public interface, while the web tier to application tier should be internal. Note: When using load-balancing rules with Azure Load Balancer, you need to specify a health probes to
allow Load Balancer to detect the backend endpoint status.
Health probes support the TCP, HTTP, HTTPS protocols. References:
https://docs.microsoft.com/en-us/azure/application-gateway/waf-overview https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-custom-probe-overview

NEW QUESTION 4

You network contains an Active Directory domain named adatum.com and an Azure Active Directory (Azure AD) tenant named adatum.onmicrosoft.com.
Adatum.com contains the user accounts in the following table.
AZ-303 dumps exhibit
Adatum.onmicrosoft.com contains the user accounts in the following table.
AZ-303 dumps exhibit
You need to implement Azure AD Connect. The solution must follow the principle of least privilege. Which user accounts should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: User5
In Express settings, the installation wizard asks for the following: AD DS Enterprise Administrator credentials
Azure AD Global Administrator credentials
The AD DS Enterprise Admin account is used to configure your on-premises Active Directory. These credentials are only used during the installation and are not used after the installation has completed. The Enterprise Admin, not the Domain Admin should make sure the permissions in Active Directory can be set in all domains. Box 2: UserA
Azure AD Global Admin credentials are only used during the installation and are not used after the installation has completed. It is used to create the Azure AD Connector account used for synchronizing changes to Azure AD. The account also enables sync as a feature in Azure AD.
References:
https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-aadconnect-accounts-permissio

NEW QUESTION 5

You have resources in three Azure regions. Each region contains two virtual machines. Each virtual machine has a public IP address assigned to its network interface and a locally installed application named App1.
You plan to implement Azure Front Door-based load balancing across all the virtual machines.
You need to ensure that App1 on the virtual machines will only accept traffic routed from Azure Front Door. What should you implement?

  • A. Azure Private Link
  • B. service endpoints
  • C. network security groups (NSGs) with service tags
  • D. network security groups (NSGs) with application security groups

Answer: C

Explanation:
Configure IP ACLing for your backends to accept traffic from Azure Front Door's backend IP address space and Azure's infrastructure services only. Refer the IP details below for ACLing your backend:
AZ-303 dumps exhibit Refer AzureFrontDoor.Backend section in Azure IP Ranges and Service Tags for Front Door's IPv4 backend IP address range or you can also use the service tag AzureFrontDoor.Backend in your network security groups.
Reference:
https://docs.microsoft.com/en-us/azure/frontdoor/front-door-faq

NEW QUESTION 6

You plan to create an Azure Storage account in the Azure region of East US 2. You need to create a storage account that meets the following requirements:
AZ-303 dumps exhibit Replicates synchronously
AZ-303 dumps exhibit Remains available if a single data center in the region fails
How should you configure the storage account? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Zone-redundant storage (ZRS)
Zone-redundant storage (ZRS) replicates your data synchronously across three storage clusters in a single region.
LRS would not remain available if a data center in the region fails GRS and RA GRS use asynchronous replication.
Box 2: StorageV2 (general purpose V2) ZRS only support GPv2.
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-zrs

NEW QUESTION 7

: 292 HOTSPOT
From Azure Cosmos DB, you create the containers shown in the following table.
AZ-303 dumps exhibit
You add the following item to Container1.
AZ-303 dumps exhibit
You plan to add items to Azure Cosmos DB as shown in the following table.
AZ-303 dumps exhibit
You need to identify which items can be added successfully to Container1 and Container2.
What should you identify for each container? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-303 dumps exhibit

NEW QUESTION 8

You have SQL Server on an Azure virtual machine named SQL1.
You need to automate the backup of the databases on SQL1 by using Automated Backup v2 for the virtual machines. The backups must meet the following requirements:
• Meet a recovery point objective (RPO) of 15 minutes.
• Retain the backups for 30 days.
• Encrypt the backups at rest.
What should you provision as part of the backup solution?

  • A. Azure Key Vault
  • B. an Azure Storage account
  • C. a Recovery Services vault
  • D. Elastic Database jobs

Answer: B

Explanation:
An Azure storage account is used for storing Automated Backup files in blob storage. A container is created at this location to store all backup files. The backup file naming convention includes the date, time, and database GUID.
Reference:
https://docs.microsoft.com/en-us/azure/azure-sql/virtual-machines/windows/automated-backup

NEW QUESTION 9

You have 10 Azure virtual machines on a subnet named Subnet1. Subnet1 is on a virtual network named VNet1.
You plan to deploy a public Azure Standard Load Balancer named LB1 to the same Azure region as the 10 virtual machines.
You need to ensure that traffic from all the virtual machines to the internet flows through LB1. The solution must prevent the virtual machines from being accessible on the internet.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Add health probes to LB1.
  • B. Add the network interfaces of the virtual machines to the backend pool of LB1.
  • C. Add an inbound rule to LB1.
  • D. Add an outbound rule to LB1.
  • E. Associate a network security group (NSG) to Subnet1.
  • F. Associate a user-defined route to Subnet1.

Answer: ABD

Explanation:

Reference:
https://docs.microsoft.com/en-us/azure/load-balancer/tutorial-load-balancer-standard-manage-portal2

NEW QUESTION 10

You have an Azure subscription named Subscription1. Subscription1 contains the resources in the following table:
AZ-303 dumps exhibit
VNet1 is in RG1. VNet2 is in RG2. There is no connectivity between VNet1 and VNet2. An administrator named Admin1 creates an Azure virtual machine VM1 in RG1. VM1 uses a disk named Disk1 and connects to VNet1. Admin1 then installs a custom application in VM1.
You need to move the custom application to VNet2. The solution must minimize administrative effort. Which two actions should you perform? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
We cannot just move a virtual machine between networks. What we need to do is identify the disk used by the VM, delete the VM itself while retaining the disk, and recreate the VM in the target virtual network and then attach the original disk to it.
Reference:
https://blogs.technet.microsoft.com/canitpro/2014/06/16/step-by-step-move-a-vm-to-a-different-vnet-on-azure/
https://4sysops.com/archives/move-an-azure-vm-to-another-virtual-network-vnet/#migrate-an-azure-vm-betwee

NEW QUESTION 11

You have an Azure subscription that contains two virtual networks named VNet1 and VNet2. Virtual machines connect to the virtual networks.
The virtual networks have the address spaces and the subnets configured as shown in the following table.
AZ-303 dumps exhibit
You need to add the address space of 10.33.0.0/16 to VNet1. The solution must ensure that the hosts on VNet1 and VNet2 can communicate.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-303 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Remove peering between Vnet1 and VNet2.
You can't add address ranges to, or delete address ranges from a virtual network's address space once a virtual network is peered with another virtual network. To add or remove address ranges, delete the peering, add or remove the address ranges, then re-create the peering. Step 2: Add the 10.44.0.0/16 address space to VNet1. Step 3: Recreate peering between VNet1 and VNet2 References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-peering

NEW QUESTION 12

You have an Azure Kubernetes Service (AKS) cluster named Clus1 in a resource group named RG1. An administrator plans to manage Clus1 from an Azure AD-joined device.
You need to ensure that the administrator can deploy the YAML application manifest file for a container application.
You install the Azure CLI on the device. Which command should you run next?

  • A. kubectl get nodes
  • B. az aks install-cli
  • C. kubectl apply –f app1.yaml
  • D. az aks get-credentials --resource-group RG1 --name Clus1

Answer: C

Explanation:
kubectl apply –f appl.yaml applies a configuration change to a resource from a file or stdin. References:
https://kubernetes.io/docs/reference/kubectl/overview/ https://docs.microsoft.com/en-us/cli/azure/aks

NEW QUESTION 13

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it As a result, these questions will not appear in the review screen.
You have an Azure Active Directory {Azure AD) tenant named contoso.com.
A user named Admin1 attempts to create an access review from the Azure Active Directory admin center and discovers that the Access reviews settings are unavailable. Admin 1 discovers that all the other Identity Governance settings are available.
Admin1 is assigned The User administrator. Compliance administrator, and Security administrator roles. You need to ensure that Admin1 can create access reviews in contoso.com. .
Solution: You assign the Global administrator role to Admin1. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
Instead use Azure AD Privileged Identity Management.
Note: PIM essentially helps you manage the who, what, when, where, and why for resources that you care about. Key features of PIM include:
AZ-303 dumps exhibit Conduct access reviews to ensure users still need roles References:
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-configure

NEW QUESTION 14

You have an Azure subscription that contains 10 virtual machines on a virtual network.
You need to create a graph visualization to display the traffic flow between the virtual machines. What should you do from Azure Monitor?

  • A. From Activity log, use quick insights.
  • B. From Metrics, create a chart.
  • C. From Logs, create a new query.
  • D. From Workbooks, create a workbook.

Answer: C

Explanation:
Navigate to Azure Monitor and select Logs to begin querying the data Reference:
https://azure.microsoft.com/en-us/blog/analysis-of-network-connection-data-with-azure-monitor-for-virtual-mac

NEW QUESTION 15

You have an Azure subscription that contains a resource group named RG1. RG1 contains multiple resources. You need to trigger an alert when the resources in RG1 consume $1,000 USD.
What should you do?

  • A. From Cost Management + Billing, add a cloud connector.
  • B. From the subscription, create an event subscription.
  • C. From Cost Management + Billing create a budget.
  • D. From RG1, create an event subscription.

Answer: C

Explanation:
Create budgets to manage costs and create alerts that automatically notify you are your stakeholders of spending anomalies and overspending.
To set it up, go to the Azure Portal, select 'Cost Management + Billing' -> 'Cost Management' -> 'Go to Cost Management'.
AZ-303 dumps exhibit
Note: Cost alerts are automatically generated based when Azure resources are consumed. Alerts show all active cost management and billing alerts together in one place. When your consumption reaches a given threshold, alerts are generated by Cost Management. There are three types of cost alerts: budget alerts, credit alerts, and department spending quota alerts.
Reference:
https://docs.microsoft.com/en-us/azure/cost-management-billing/manage/getting-started

NEW QUESTION 16

Your company has an Azure subscription.
You enable multi-factor authentication (MFA) for all users.
The company’s help desk reports an increase in calls from users who receive MFA requests while they work from the company’s main office.
You need to prevent the users from receiving MFA requests when they sign in from the main office. What should you do?

  • A. From Azure Active Directory (Azure AD), configure organizational relationships.
  • B. From the MFA service settings, create a trusted IP range.
  • C. From Conditional access in Azure Active Directory (Azure AD), create a custom control.
  • D. From Conditional access in Azure Active Directory (Azure AD), create a named location.

Answer: B

Explanation:
The first thing you may want to do, before enabling Multi-Factor Authentication for any users, is to consider configuring some of the available settings. One of the most important features is a trusted IPs list. This will allow you to whitelist a range of IPs for your network. This way, when users are in the office, they will not get prompted with MFA, and when they take their devices elsewhere, they will. Here’s how to do it:
Log in to your Azure Portal.
Navigate to Azure AD > Conditional Access > Named locations. From the top toolbar select Configure MFA trusted IPs. References:
https://www.kraftkennedy.com/implementing-azure-multi-factor-authentication/

NEW QUESTION 17

Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2019. Server1 is a container host. You are creating a Dockerfile to build a container image.
You need to add a file named File1.txt from Server1 to a folder named C:\Folder1 in the container image. Solution: You add the following line to the Dockerfile.
COPY File1.txt /Folder1/
You then build the container image. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
Copy is the correct command to copy a file to the container image. References:
https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#add-or-copy https://docs.docker.com/engine/reference/builder/

NEW QUESTION 18

You need to meet the user requirement for Admin1. What should you do?

  • A. From the Subscriptions blade, select the subscription, and then modify the Properties.
  • B. From the Subscriptions blade, select the subscription, and then modify the Access control (IAM) settings.
  • C. From the Azure Active Directory blade, modify the Properties.
  • D. From the Azure Active Directory blade, modify the Groups.

Answer: A

Explanation:
Change the Service administrator for an Azure subscription
AZ-303 dumps exhibit Sign in to Account Center as the Account administrator.
AZ-303 dumps exhibit Select a subscription.
AZ-303 dumps exhibit On the right side, select Edit subscription details.
Scenario: Designate a new user named Admin1 as the service administrator of the Azure subscription. References:
https://docs.microsoft.com/en-us/azure/billing/billing-add-change-azure-subscription-administrator

NEW QUESTION 19
......

P.S. Downloadfreepdf.net now are offering 100% pass ensure AZ-303 dumps! All AZ-303 exam questions have been updated with correct answers: https://www.downloadfreepdf.net/AZ-303-pdf-download.html (0 New Questions)