we provide Breathing IBM C9010-022 testing engine which are the best for clearing C9010-022 test, and to get certified by IBM IBM AIX Administration V1. The C9010-022 Questions & Answers covers all the knowledge points of the real C9010-022 exam. Crack your IBM C9010-022 Exam with latest dumps, guaranteed!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for IBM C9010-022 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW C9010-022 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/C9010-022-exam-dumps.html
Q121. - (Topic 4)
In the following graphic, the administrator created an additional paging space using smit mkps. The paging space is not active. What is necessary to start using the new paging space?
A. Use swapon to activate the new paging space.
B. Reboot the server to activate the new paging space.
C. Vary on the pgvg volume group prior to creating the new paging space.
D. Use chps with the -a y flag to activate the new paging space for immediate use.
Answer: A
Q122. - (Topic 1)
A mirrored rootvg internal disk, hdisk1, has failed and must be replaced. The remaining mirrored disk, hdisk0,is intact and functioning normally. What is the correct sequence of actions?
A. unmirrorvg rootvg hdisk1 reducevg roolvg hdisk1 rmdev -I hdisk1 -d physically replace hdisk1 cfgmgr extendvg rootvg hdisk1 mirroivg rootvg Run a bosboot on both disks
B. rmdev-l hdisk1 -d physically replace hdisk1 cfgmgr unmirrorvg rootvg hdisk1 reducevg rootvg hdisk1 extendvg rootvg hdisk1 mirrorvg rootvg Run a bosboot on both disks
C. unmirrorvg rootvg hdisk1 rmdev-I hdisk1 -d physically replace hdisk1 reducevg rootvg hdisk1 cfgmgr extendvg rootvg hdisk1 mirrorvg rootvg Run a bosboot on both disks
D. unmirroivg rootvg hdisk1 reducevg rootvg hdisk1 rmdev -I hdisk1 -d physically replace hdisk1 cfgmgr extendvg rootvg hdisk1 Run a bosboot on both disks mirrorvg rootvg
Answer: A
Q123. - (Topic 4)
What is the purpose of using the ssh-keygen -t dsa command?
A. Establishing credentials for a secure connection between systems.
B. Provide performance monitoring agents to monitor encrypted file systems.
C. Allow a user to switch to the root user without knowing the root password.
D. Securely transfer files between AIX instances without a password prompt using ftp
Answer: A
Q124. - (Topic 4)
What procedure can be used to recover an AIX system that will not boot due to a corrupted boot logical volume?
A. Power on the system and enter SMS mode.
Select Diagnostics and Problem Determination.
Select the option to Recover Boot Logical Volume.
B. Boot the system into maintenance mode using a mksysb.
Select the System Backup and Install menu.
Select the option to Recover Devices.
C. Boot the system into maintenance mode using AIX installation media.
Select the Start Maintenance Mode for System Recovery menu and access the root
volume group Issue the bosboot command for the rootvg disk.
D. Boot the system into maintenance mode using a mksysb.
Select the Start Maintenance Mode for System Recovery menu and access the root
volume group Copy the /SPOT/dev/hd5 to /dev/hd5 and run syncvg rootvg
Answer: C
Q125. - (Topic 1)
What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up asa 'Mover Service Partition’.
Answer: A
Q126. - (Topic 1)
An administrator created logical volume fs01l to contain a JFS2 file system. When trying to create the filesystem the crfs command gives an error. Given the following logical volume definition, which action will correct the error?
A. crfs -vjfs2 -m /fs01 -d /dev/fs01lv
B. mklv-tjfs2-yfs01lvrootvg5
C. chdev-lfs01lv-atype=jfs2
D. chlv-tjfs2fs01lv
Answer: D
Q127. - (Topic 4)
Given the following information:
In which order should the LPARs be activated to ensure thatallof them will start?
A. lpar2 lpar3 lpar1 lpar4
B. lpar1 lpar2 lpar3 lpar4
C. lpar 4 lpar 3 lpar 1 lpar 2
D. lpar 2 lpar 3 lpar 4 lpar 1
Answer: B
190. - (Topic 4)
An administrator wants to migrate data in a volume group from one set of disks to a new set of disks. No free disks are currently available within the volume group.
What must be done before migrating the data to the new disks?
A. The new disks must be added to thevolume group with extendvg and then migrate the data.
B. The volume group must be imported to the new disks withimportvg.
C. The volume group must be varied off withvaryoffvgbefore adding the new disks.
D. The new disks must be formatted for a volume group withchdevand then extended.
Answer: B
Q128. - (Topic 1)
Which technology provides the maximum amount of usable storage and resilience for a system with 6 physical volumes?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Answer: C
Q129. - (Topic 1)
How can an administrator enable the Workload Partitions Manager feature after AIX 7 has been installed with the default options?
A. Change AIX License using chlicense -I command
B. Change AIX edition using chedition -e command
C. Change WPAR License using chwpar -I command
D. Change WPAR edition using chwpar-e command
Answer: B
Q130. - (Topic 2)
Users on a server are receiving errors stating that they cannot fork any additional processes. The administrator checks server paging space and finds that it is only 5% used.
What is the next most likely cause of theforking issue and what action should be taken to resolve it?
A. Corruption has occurred to the bos.rte.control fileset. Reinstall the fileset with the -f option.
B. The number of fixed licenses has been reached. Use 'chlicense' to increase the limit andreboot the system.
C. System requires additional table space as well as paging space. Check the table space and increase as required.
D. The system has the default maxuproc system attribute. This should be increased to a value appropriate for the environment.
Answer: D
