The Secret Of HP HPE0-J68 Actual Test

NEW QUESTION 1

You need to deploy a Recovery Manager Central appliance and integrate it with a customer’s 3PAR system. Which information must be collected from the customer in order to proceed with the installer? (Choose two.)

• A. StoreOnce store name
• B. vCenter IP address or hostname
• C. HPE 3PAR used capacity
• D. IP address of the RMC
• E. NFS path

Answer: CD

NEW QUESTION 2

You are presenting the HPE StoreEver portfolio to a media agency. What advantage is offered when using LTFS?

• A. file management capabilities will be provided with tape cartridges
• B. WORM functionality for file, block and object storage access on tape
• C. file encryption with public and private key management
• D. file and block data management within an HPE HSM solution

Answer: A

NEW QUESTION 3

A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase- adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new
adapter is not configurable.
What is the most likely reason for this issue?

• A. The StoreOnce software requires updating
• B. Secure boot must be enabled in the BIOS to securely enable HBAs
• C. The customer failed to install a License to Use (LTU) for it
• D. The StoreOnce needs to connect to InfoSight to validate the adapter authenticity

Answer: A

NEW QUESTION 4

What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?

• A. Store virtual Peer motion
• B. HPE 3PAR Remote Copy
• C. Recovery Manager central
• D. StoreServ Peer Motion

Answer: C

NEW QUESTION 5

Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)

• A. Encryption
• B. Cloud Bank
• C. Catalyst
• D. VTL/NAS replication
• E. Flexible I/O HBAs

Answer: CD

NEW QUESTION 6

You are designing a new HPE 3PAR StoreServ all-flash array for the customer.. Which ratio should you expect to have the highest efficiency?

• A. Read/write ratio
• B. Reclamation ratio
• C. Compaction Ratio
• D. Thin provisioning ratio

Answer: C

NEW QUESTION 7

A customer needs to add another HPE 3PAR StoreServ system and plans to use the federated storage approach.
Which advantages can the customer expect? (Choose two.)

• A. load balancing
• B. reduced power, cooling, and environmental impacts
• C. allows multiple management tools
• D. easier migration
• E. federated deduplication

Answer: AD

Explanation:
Federated storage—Move data between storage systems in a peer-to-peer relationship simply, dy namically, and nondisruptively to improve storage utilization, balance workloads, and ease storage migration.

NEW QUESTION 8

When using a HPE 3 PAR Storeserv array to enable a user to apply array–based data services to specific application and VM’s. What is the benefit of implementing VM-level gradually of Volts?

• A. Data sprawls eliminated by performing the migration functions at the array level using 3PAR HPE Dynamic Optimization
• B. Efficiency is maintained by reclaiming space from deleted or migrated VMs using capabilities built into the storage ASIC
• C. Performing is accelerated by detecting and moving the most frequently –accessed VMs into the fast class tier
• D. Performance is accelerated by leveraging the deduplication capabilities built into the storage ASIC

Answer: B

NEW QUESTION 9

You are adding a new host for an HPE 3PAR StoreServ proof-of-concept .In addition to the host name ,What is the minimum information that is required to create a host profile?

• A. Host Persona
• B. Host MAC
• C. Host set
• D. Host WWN

Answer: D

NEW QUESTION 10

You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high
availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

• A. No license is required
• B. 2-port 10 Gb Ethernet Adapter (NIC) is required
• C. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
• D. RMC 6.2 is required
• E. Target drive type must match source drive type

Answer: CD

NEW QUESTION 11

Which tool is used to determine current compaction ratios on Primera arrays?

• A. WebUI
• B. Storage Management Utility (SMU)
• C. NinjaStars
• D. SSMC System Reporter

Answer: D

NEW QUESTION 12

You are handing over the installed array to customer. The customer wants to review the amount of HDDs and SSDs in the system.
Click the relevant menu option where the front panel of the head shelf can be visualized.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 13

A customer is implementing an SAP HANA environment and is looking for an alternative to an entirely in-memory database.
Which storage technology should you recommend?

• A. SAS SSD
• B. NVMe SSD
• C. NVMe SCM
• D. Intel Optane

Answer: D

NEW QUESTION 14

A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement. Which HPE solution component should you discuss with the customer first?

• A. HPE SimpliVity 380
• B. HPE MSA 2052 Storage
• C. HPE Nimble CS1000 system
• D. HPE 3PAR StoreServ 8200

Answer: A

NEW QUESTION 15

How does the HPE StoreVirtual VSA storage platform scale performance and capacity?

• A. eliminates the need for storage controllers
• B. enables access through multiple protocols
• C. aggregates all resources into a single storage pool
• D. recreates storage pools on multiple devices

Answer: D

NEW QUESTION 16

You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer’s site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)

• A. Configure Adaptive Flash Cache.
• B. Configure scheduled tunesys tasks.
• C. Rebalance all flash drives between nodes 0 and 2.
• D. Configure Adaptive Optimization.
• E. Configure dedicated drives to enable Adaptive Flash Cache.

Answer: BD

NEW QUESTION 17
......