We provide real JN0-102 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Juniper JN0-102 Exam quickly & easily. The JN0-102 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Juniper JN0-102 dumps pdf and vce product and material, you can easily pass the JN0-102 exam.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Juniper JN0-102 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW JN0-102 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/JN0-102-exam-dumps.html
P.S. High value JN0-102 testing material are available on Google Drive, GET MORE: https://drive.google.com/open?id=1tOoR73rpM_qDSmJkbsqP3ACMtoFLOlMz
New Juniper JN0-102 Exam Dumps Collection (Question 7 - Question 16)
New Questions 7
What represents the binary equivalence of 207?
A. 11001111
B. 11101011
C. 11010111
D. 11010101
Answer: A
New Questions 8
What represents the binary equivalence of 148?
A. 10010110
B. 11010010
C. 10011100
D. 10010100
Answer: D
New Questions 9
-- Exhibit --
...
if-exceeding { bandwidth-limit 1m; burst-size-limit 3k;
}
then discard;
-- Exhibit --
The configuration in the exhibit is associated with which class of service component?
A. classification
B. policing
C. queuing
D. scheduling
Answer: B
New Questions 10
By default, what are three valid routing tables? (Choose three.)
A. inet.0
B. inet4.0
C. inet.6
D. inet6.0
E. inet.3
Answer: A,D,E
Explanation:
The following names are reserved for the default routing tables maintained by the JUNOS software:
inet.0u2014Default Internet Protocol version 4 (IPv4) unicast routing table inet6.0u2014Default Internet Protocol version 6 (IPv6) unicast routing table instance-name.inet.0u2014Unicast routing table for a particular routing instance inet.1u2014Multicast forwarding cache
inet.2u2014Unicast routes used for multicast reverse path forwarding (RPF) lookup
inet.3u2014MPLS routing table for path information
mpls.0u2014MPLS routing table for label-switched path (LSP) next hops
New Questions 11
-- Exhibit u2013
-- Exhibit --
You have been asked to establish reachability between Router 1's and Router 2's loopback addresses as shown in the exhibit.
Which two steps will accomplish this task? (Choose two.)
A. Create a static route on Router 1 to 172.17.28.1 with a next hop of 10.10.10.2.
B. Create a static route on Router 1 to 172.17.28.1 with a next hop of 10.10.10.1.
C. Create a static route on Router 2 to 172.17.25.1 with a next hop of 10.10.10.1.
D. Create a static route on Router 1 to 172.17.25.1 with a next hop of 10.10.10.2.
Answer: A,C
New Questions 12
What is a route filter?
A. a list of prefixes that can be configured in a policy
B. a single prefix that is configured separately, and can be referenced in a policy
C. a list of prefixes that is configured separately and can be referenced in a policy
D. a single prefix that can be configured within a policy
Answer: A
Explanation:
A route filter is a collection of match prefixes. When specifying a match prefix, you can specify an exact match with a particular route or a less precise match. You can configure either a common action that applies to the entire list or an action associated with each prefix.
References: http://www.juniper.net/documentation/en_US/junos16.1/topics/usage-guidelines/policy-configuring-route-lists-for-use-in-routing-policy-match-conditions.html
New Questions 13
What does the "3" in Junos version 14.2R3.2 represent?
A. A service build number
B. A single-threaded version of the Junos OS
C. A major release number
D. A minor release number
Answer: A
New Questions 14
Referring to the exhibit, you want to block HTTP access to Web-Server from the subnet where Mal-User is located. All other traffic should be permitted.
Which firewall filter configuration do you use?
A. [edit firewall family inet filter STOP-MAL-USER]user@router# showterm one {from
{source-address {200.200.200.0/24;}destination-address
{100.100.100.10/32;}protocoltcp;destination-port http;}then accept;}term two {then {reject;}}
B. [edit firewall family inet filter STOP-MAL-USER]user@router# showterm one {from
{source-address {100.100.100.0/24;}destination-address
{200.200.200.1/32;}protocoltcp;destination-port http;}then accept;}term two {then {reject;}}
C. [edit firewall family inet filter STOP-MAL-USER]user@router# showterm one {from
{source-address {100.100.100.0/24;}destination-address
{200.200.200.1/32;}protocoltcp;destination-port http;}then reject;}term two {then {accept;}}
D. [edit firewall family inet filter STOP-MAL-USER]user@router# showterm one {from
{source-address {200.200.200.0/24;}destination-address
{100.100.100.10/32;}protocoltcp;destination-port http;}then reject;}term two {then {accept;}}
Answer: D
New Questions 15
Which two statements are true about terms in a routing policy? (Choose two.)
A. A routing policy cannot have more than one term.
B. If a term does not contain a from statement, all routes match.
C. If a term does not contain a from statement, the Junos OS will not commit.
D. A then statement is not mandatory in a term.
Answer: B,D
New Questions 16
When you display the routing table by entering the show route command, what does the * indicate?
A. The route is a direct route.
B. The route was selected as active.
C. The route is a default route.
D. The route was learned using a dynamic routing protocol.
Answer: B
Explanation:
An asterisk (*) indicates that the route is both the active and the last active route. An asterisk before a to line indicates the best subpath to the route.
References: https://www.juniper.net/documentation/en_US/junos14.1/topics/reference/command-summary/show-route-detail.html
P.S. Easily pass JN0-102 Exam with Examcollectionplus High value Dumps & pdf vce, Try Free: https://www.examcollectionplus.net/vce-JN0-102/ (405 New Questions)