We provide real JN0-104 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Juniper JN0-104 Exam quickly & easily. The JN0-104 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Juniper JN0-104 dumps pdf and vce product and material, you can easily pass the JN0-104 exam.
Free demo questions for Juniper JN0-104 Exam Dumps Below:
NEW QUESTION 1
When you first log in to a router, how does the router indicate that factory defaults are being used? Junos Configuration Basics
- A. The router's host name is Amnesiac.
- B. The password you used to log in is junos.
- C. The router immediately enters configuration mode after you log in.
- D. The router allows you to enter configuration mode without logging in.
Answer: A
NEW QUESTION 2
You are troubleshooting an issue and want to monitor syslog in real time. Which operational command accomplish this task?
- A. Show log message
- B. Monitor start message
- C. Show log message | refresh i
- D. Monitor traffic interface fxp0.0
Answer: B
NEW QUESTION 3
At which hierarchy would you configure a static MAC address for interface ge-0/0/0?
- A. [edit interfaces ge-0/0/0 unit 0]
- B. [edit interfaces ge-0/0/0]
- C. [edit interfaces ge-0/0/0 unit 0 family inet]
- D. [edit interfaces ge-0/0/0 unit 0 family inet address 172.25.11.2/24]
Answer: D
NEW QUESTION 4
What does the output of the show route forwarding-table command display?
- A. The routing protocol databases in the Routing Engine
- B. The inactive entries in the Routing Engine’s routing table
- C. The Routing Engine’s forwarding table
- D. The Packet Forwarding Engine routing table
Answer: C
NEW QUESTION 5
Routing policies contain which two type of statements? (Choose two.)
- A. and
- B. from
- C. default
- D. then
Answer: BD
NEW QUESTION 6
Referring to the exhibit,
which command will cause this event message?
- A. request system logout
- B. request system commit
- C. request system recover
- D. request system halt
Answer: D
NEW QUESTION 7
Which statement describes the ulst next-hop type that appears in the output of the show route forwarding-table command?
- A. A list of unicast or multicast forwarding entries waiting to be resolved.
- B. A list of unicast destination prefixes for which packets will be silently discarded
- C. A list of unicast next hops used for a given destination for which load balancing is enabled
- D. A list of unicast or multicast destination prefixes for which packets will be silently discarded.
Answer: C
NEW QUESTION 8
What does the number inside the square bracket represent?
- A. Metric
- B. Local preference
- C. Protocol reference number
- D. Route preference
Answer: D
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/ref/command/show-route.html#show-ro Module 9 of Juniper Open Learning, Routing Fundamentals describes the [Source/Route Preference]. The metric is 'how' a protocol calculates the best path to a destination. RIP = Hops, OSPF = Cost. Metrics are unique to protocols.
user@host> show route
inet.0: 11 destinations, 12 routes (11 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both 1:65500:1:10.0.0.20/240
*[MVPN/70] 19:53:41, metric2 1
Indirect
1:65500:1:10.0.0.40/240
*[BGP/170] 19:53:29, localpref 100, from 10.0.0.30 AS path: I
> to 10.0.24.4 via lt-0/3/0.24, label-switched-path toD [BGP/170] 19:53:26, localpref 100, from 10.0.0.33 AS path: I
> to 10.0.24.4 via lt-0/3/0.24, label-switched-path toD inside square brackets -> route preference
metric and localpref are optional and after the date
NEW QUESTION 9
Which statement is true about using custom login class permissions?
- A. If you allow and deny the same command, the command is allowed_
- B. If you allow and deny the same command, the command is denied.
- C. If you allow and deny the same command, Junos OS will randomly choose the action
- D. If you allow and deny the same command, the Junos OS will fail the commit check.
Answer: B
NEW QUESTION 10
You are in configuration mode at the top of the hierarchy. You need to abort the changes that you have made and start again with a fresh copy of the active configuration. Which command should you use to accomplish this task?
- A. rollback 0
- B. load active
- C. reset config
- D. clear candidate config
Answer: A
NEW QUESTION 11
Which command is used to validate the syntax of a configuration without applying the
configuration?
- A. commit check
- B. commit confirmed
- C. commit synchronize
- D. commit and-quit
Answer: A
NEW QUESTION 12
What’s is the minimum system-defined user class required to issue clear commands?
- A. read-only
- B. operator
- C. authorized
- D. super-user
Answer: B
NEW QUESTION 13
In which directory the traceoption files stored by default?
- A. /var/db/
- B. /var/tmp/
- C. /var/log/
- D. /var/home/
Answer: C
NEW QUESTION 14
Which statement is true about a virtual router routing instance?
- A. It can be used for Layer 3 VPN implementations.
- B. It can be used to create a separate routing table.
- C. An interface in the routing instance can also reside in the default routing instance.
- D. It automatically has import and export policies applied.
Answer: B
NEW QUESTION 15
Referring to the exhibit,
which dynamic routing protocol would be used for this topology?
- A. IGMPv3
- B. OSPFv2
- C. RIPng
- D. RIP
Answer: C
NEW QUESTION 16
Refer to the exhibit.
A customer reports that they have recently lost connectivity to a remote site over a shared architecture. Referring to the exhibit, what is the problem?
- A. The remote link is down.
- B. The remote router has been powered off.
- C. The authentication method or key has been changed.
- D. The remote site router has been configured for OSPF.
Answer: C
NEW QUESTION 17
......
100% Valid and Newest Version JN0-104 Questions & Answers shared by Dumpscollection.com, Get Full Dumps HERE: https://www.dumpscollection.net/dumps/JN0-104/ (New 270 Q&As)
