What Does JN0-633 book Mean?

Our Juniper technicians will always be searching for a approach to decipher the newest JN0-633 online questions. You are able to download the newest JN0-633 dumps about our Ucertify website. All of us not really only offer JN0-633 pdf examinations but the software program model. Ucertify JN0-633 test motor produces a simulator of the environment if the JN0-633 arises, offers a excellent chance to apply the actual Juniper test communicative environment. According to your test preparing, it is possible to choose any kind of JN0-633 model to study overall flexibility. Transferring JN0-633 test can become more simple faster simply by researching Juniper JN0-633 apply examinations.

2017 Feb JN0-633 torrent

Q41. Click the Exhibit button.

-- Exhibit–

-- Exhibit --

Referring to the exhibit, which feature allows the hosts in the Trust and DMZ zones to route to either ISP, based on source address?

A. source NAT

B. static NAT

C. filter-based forwarding

D. source-based routing

Answer:

Explanation: Reference:http://www.juniper.net/techpubs/en_US/junos12.2/topics/example/logical-systems-filter-based-forwarding.html


Q42. Click the Exhibit button.

user@host> show log message

Feb4 00:04:17 host rpd[4516]: EVENT <UpDowm> st0.0 index 76 <Up Broadcast Multicast>

Feb4 00:04:17 host-kmd[1391]: KMD_PM_SA ESTABLISHED: Local gateway: 192.168.10.1, Remote gateway: 192.168.10.3, Local ID: ipv4_subnet(any:0, [0..7]=0.0.0.0/0), Remote ID: ipv4_subnet(any:0,[0..7]=0.0.0.0/0),

Direction: inbound, SPI: 0x8d5816fd, AUX-SPI: 0, Mode: Tunnel, Type: dynamic, Traffic-selector:

Feb4 00:04:17 host rpd[4516]: EVENT UpDown st0.0 index 76 10.10.10.1/24 –

> (null) <Up Broadcast Multicast>

Feb4 00:04:17 host kmd[1391]: KMD_PM_SA_ESTABLISHED: Local gateway: 192.168.10.1, Remote gateway: 192.168.10.3, Local ID: ipv4_subnet(any:0, [0..7]=0.0.0.0/0), Remote ID: ipv4_subnet(any:0,[0..7]=0.0.0.0/0),

Direction: outbound, SPI: 0x77f07d5c, AUX-SPI: 0, Mode: Tunnel, Type: dynamic, Traffic-selector:

Feb4 00:04:17 host kmd[1391]: KMD_VPN_UP_ALARM_USER: VPNto-spoke-1 from 192.168.10.3 is up. Local-ip: 192.168.10.1, gateway name: spoke-1, vpn name:

to-spoke-1, tunnel-id: 131073, local tunnel-if: st0.0, remote tunnel-ip:

10.10.10.3, Local IKE-ID: 192.168.10.1, Remote IKE-ID: 192.168.10.3, XAUTH

username: Not-Applicable, VR id: 0, Traffic-selector: , Traffic-selector local ID:ipv4_subnet,(any:0,[0..7]=0.0.0.0/0), Traffic-selector remote ID: ipv4_subnet(any:11,[0..7]=0.0.0.0/0)

Feb4 00:04:17 host mib2d[1385]: SNMP_TRAP_LINK_UP: ifIndex 539, ifAdminSiLatus up(1), ifOperStatus up(1), ifName st0.0

Feb4 00:04:17 host kmd[1391]: KMD_PM_SA_ESTABLTSHED: Local gateway: 192.168.10.1, Remote gateway: 192.168.10.5, Local ID: ipv4 subnet(any:0, [0..7]=0.0.0.0/0), Remote ID: ipv4_subnet(any:0,[0..7]=0.0.0.0/0),

Direction: inbound, SPI: 0x2790a42c, AUX-SPI: 0, Mode: Tunnel, Type: dynamic, Traffic-selector:

Feb4 00:04:17 host kmd[1391]: KMD_PM_SA_ESTABLISHED: Local gateway: 192.168.10.1, Remote gateway: 192.168.10.5, Local ID: ipv4_subnet(any:0, [0..7]=0.0.0.0/0), Remote ID: ipv4_subnet(any:0,[0..7]=0.0.0.0/0),

Direction: outbound, SPI: 0x2df17ea8, AUX-SPI: 0, Mode: Tunnel, Type: dynamic, Traffic-selector:

Feb4 00:04:17 host kmd[1391]: KMD_VPN_UP_ALARM_USER: VPN to-spoke-3 from 192.168.10.5 is up. Local-ip: 192.168.10.1, gateway name: spoke-3, vpn name:

to-spoke-3, tunnel-id: 131076, local tunnel-if: st0.0, remote tunnel-ip:

Not-Available, Local IKE-ID: 192.168.10.1, Remote IKE-ID: 192.168.10.5,

XAUTH username: Not-Applicable, VR id: 0, Traffic-selector: , Traffic- selector local TD: ipv4_subnet(any:0,[0..7]=0.0.0.0/0), Traffic-selector remote ID: ipv4_subnet(any:0,[0._7]=0.0.0.0/0)

Feb4 00:04:17 host kmd[1391]: IKE negotiation failed with error: No proposal chosen. IKE Version: 1, VPN: to-spoke-2 Gateway: spoke-2, Local: 192.168.10.1/500, Remote: 192.168.10.4/500, Local IKE-ID: Not-Available,

Remote Not-Available, VR-ID: 0

Referring to the exhibit, which statement is correct?

A. The phase 1 security association for theto-spoke-3VPN is failing.

B. The phase 2 security association for theto-spoke-1VPN is failing.

C. The phase 2 security association for theto-spoke-3VPN is failing.

D. The phase 1 security association for theto-spoke-2VPN is failing.

Answer: B


Q43. You are asked to implement a point-to-multipoint hub-and-spoke topology in a mixed vendor environment. The hub device is running the Junos OS and the spoke devices are different vendor devices.Regarding this scenario, which statement is correct?

A. The NHTB table must be statically defined.

B. The NHTB table is automatically created during Phase 2.

C. The NHTB table is automatically created during Phase 1.

D. The NHTB table must be imported from each spoke.

Answer: A

Explanation: Referencehttp://www.juniper.net/techpubs/en_US/junos/topics/example/vpn-hub-spoke- nhtb-example-configuring.html


Q44. Click the Exhibit button.

-- Exhibit–

-- Exhibit --

Referring to the exhibit, the application firewall configuration fails to commit. What must you do to allow the configuration to commit?

A. Each firewall rule set must only have one rule.

B. A firewall rule set cannot mix dynamic applications and dynamic application groups.

C. The action in the rules must be different than the action in the default rule.

D. The action in the default rule must be set to deny.

Answer:

Explanation: Reference:http://www.juniper.net/techpubs/en_US/junos12.1/topics/concept/application-firewall-overview.html


Q45. Click the Exhibit button.

-- Exhibit–

-- Exhibit --

Based on the output shown in the exhibit, what are two results? (Choose two.)

A. The output shows source NAT.

B. The output shows destination NAT.

C. The port information is changed.

D. The port information is unchanged.

Answer: B,D

Explanation: Reference:http://junos.com/techpubs/software/junos-security/junos-security10.2/junos-security-cli-reference/index.html?show-security-flow-session.html


Up to date JN0-633 download:

Q46. You want to implement an IPsec VPN on an SRX device using PKI certificates for authentication. As part of the implementation, you are required to ensure that the certificate submission, renewal, and retrieval processes are handled automatically from the certificate authority.Regarding this scenario, which statement is correct?

A. You can use SCEP to accomplish this behavior.

B. You can use OCSP to accomplish this behavior.

C. You can use CRL to accomplish this behavior.

D. You can use SPKI to accomplish this behavior.

Answer: A

Explanation: Reference: Page 9

http://www.juniper.net/techpubs/en_US/junos/information-products/topic-collections/nce/pki-conf-trouble/configuring-and-troubleshooting-public-key- infrastructure.pdf


Q47. You are asked to ensure that your IPS engine blocks attacks. You must ensure that your system continues to drop additional malicious traffic without additional IPS processing for up to 30 minutes. You must ensure that the SRX Series device does send a notification packet when the traffic is dropped.

Which statement is correct?

A. Use the IP-Block action.

B. Use the Drop Packet action.

C. Use the Drop Connection action.

D. Use the IP-Close action.

Answer: D


Q48. Click the Exhibit button

[edit security]

user@host# show policies global {

policy new-policy { match {

source-address any; destination-address any; application junos-https;

}

then { permit {

application-services { application-firewall { rule-set appfw;

}

}

}

}

}

}

[edit security]

user@host# show application-firewall rule-sets appfw {

rule 1 { match {

dynamic-application junos:SSL;

}

then { permit;

}

}

rule 2 { match {

dynamic-application junos:HTTP;

}

then { reject;

}

}

default-rule { permit;

}

}

Referring to the exhibit, which two statements are correct? (Choose two.)

A. HTTP traffic is permitted.

B. HTTP traffic is dropped.

C. HTTPS traffic is permitted.

D. HTTPS traffic is dropped.

Answer: B,C


Q49. You are asked to implement an IPsec VPN between your main office and a new remote office. The remote office receives its IKE gateway address from their ISP dynamically.

Regarding this scenario, which statement is correct?

A. Configure a fully qualified domain name (FQDN) as the IKE identity.

B. Configure the dynamic-host-address option as the IKE identity.

C. Configure the unnumbered option as the IKE identity.

D. Configure a dynamic host configuration name (DHCN) as the IKE identity.

Answer: A


Q50. Click the Exhibit button.

-- Exhibit -- [edit security]

user@srx# show idp {

idp-policy NewPolicy { rulebase-exempt { rule 1 {

description AllowExternalRule; match {

source-address any; destination-address

}

}

}

}

}

-- Exhibit --

You are performing the initial IDP installation on your new SRX device. You have configured the IDP exempt rulebase as shown in the exhibit, but the commit is not successful.

Referring to the exhibit, what solves the issue?

A. You must configure the destination zone match.

B. You must configure the IPS exempt accept action.

C. You must configure the IPS rulebase.

D. You must configure the IPS engine flow action to ignore.

Answer: C

Explanation: Reference:http://jncie-sec.exactnetworks.net/2013/01/srx-idp-overview-initial-setup.html



see more JN0-633 dumps