All About Realistic NS0-184 Questions Pool

NEW QUESTION 1
Click the Exhibit button.

Referring to the numbers shown in the exhibit, which port on an AFF A220 controller is used as port e0M in
ONTAP?

• A. 4
• B. 3
• C. 2
• D. 1

Answer: A

NEW QUESTION 2
You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and
need to obtain the preinstallation information from the customer.
In this scenario, what are three examples of data required from the customer? (Choose three.)

• A. management IP addresses
• B. cluster switch name
• C. gateway IP address
• D. BMC IP addresses
• E. cluster name

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 3
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)

• A. storage VM
• B. node
• C. cluster
• D. switch

Answer: AC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-whatsnew/pdfs/fullsitesidebar/TR_4894NetApp_ONTAP_9_9_1_Feature_Overview.pdf

NEW QUESTION 4
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF
A300HApairwithtwoDS224C shelveswith3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A. Addtheshelftothe existingstack.
• B. Create a newstackon the HA pairto add the shelf.
• C. Connectthe shelfto anHA pair withNSE drives.
• D. LicenseNSE and add the shelfto thisHA pair as a new stack.

Answer: A

NEW QUESTION 5
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

• A. Brocade FOS
• B. Cisco NX-OS
• C. CiscoIOS
• D. Broadcom EFOS

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/fullsitesidebar/AFF_and_FAS_Switch_Documentation.pdf

NEW QUESTION 6
When creating a new 3.8 TB SSD-based aggregate, what is the default RAID type used with ONTAP 9.8?

• A. RAID 4
• B. RAID-TEC
• C. RAID 0
• D. RAID DP

Answer: D

NEW QUESTION 7
Click the Exhibit button.

Immediately after installing a 4-node FAS8200 cluster, you discover that node, “cluster1-02”, must be
removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)

• A. Verify that high availability is configured for failover to the HA partner, then remove the node.
• B. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
• C. Move Epsilon to cluster1-02, then remove the node.
• D. Remove the node, then the cluster will elect a new master to remain in quorum.

Answer: AC

NEW QUESTION 8
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)

• A. port sets
• B. switch zoning
• C. reporting nodes
• D. failover groups

Answer: AD

NEW QUESTION 9
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view
Telemetry data. The customer also wants to receive online information about any risks with the cluster and
potential bestpractice gaps.
Which tool satisfies the customer’s requirements?

• A. Active IQ Digital Advisor
• B. Interoperability Matrix Tool
• C. Spot by NetApp
• D. Cloud Manager

Answer: A

Explanation:
Reference: http://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf

NEW QUESTION 10
Click the Exhibit button.

You are installing a new AFF All SAN Array A700 HA pair.
Referring to the exhibit, which IP address would have been used to join node 02 to the cluster during setup?

• A. 192.168.0.112
• B. 169.254.212.198
• C. 169.254.145.151
• D. 192.168.0.101

Answer: A

NEW QUESTION 11
A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.
In this scenario, which host information is required to accomplish this task?

• A. IQNs
• B. WWNNs
• C. WWPNs
• D. host names

Answer: D

NEW QUESTION 12
You are installing a new ONTAP 9.8 cluster by using System Manager Guided Setup. In this scenario, which IP address is optional?

• A. node A IP address
• B. node B IP address
• C. gateway IP address
• D. cluster IP address

Answer: C

NEW QUESTION 13
Which two functions does the management network provide? (Choose two.)

• A. to provide access to the system console of any node in the cluster
• B. to collect diag log files
• C. to replicate the cluster configuration to all nodes
• D. to transfer SVMs between the cluster nodes

Answer: AB

NEW QUESTION 14
A host cannot connect to the namespace configured on an NVMe-enabled SVM. In this scenario, what are two reasons for this problem?
(Choose two.)

• A. The namespace has not been added to the subsystem.
• B. The namespace has not be added to the igroup.
• C. The igroup has an incorrect NQN.
• D. The subsystem has an incorrect NQN.

Answer: AD

NEW QUESTION 15
According to NetApp documentation, what should be used when using the Cluster Switch Health Monitor (CSHM) and log collection features?

• A. Telnet
• B. HTTP
• C. SSL
• D. SSH

Answer: D

NEW QUESTION 16
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)

• A. Active IQ Digital Advisor
• B. Active IQ Unified Manager
• C. ONTAP Cluster
• D. AutoSupport packages

Answer: BC

NEW QUESTION 17
Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)

• A. Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the dailytasks and provide input and output examples.
• B. If you have a specific issue, you can visit the Knowledge Base Web site (https://kb.netapp,com).
• C. The answers to any of your questions can be found on the NetApp SmartSolve site(http://smartsolve.netapp.com).
• D. You should open a case with NetApp Support for all future questions with low priority and include thekeyword "Training" in the title.

Answer: AC

NEW QUESTION 18
......