Microsoft Az-500 Item Pool 2021

Proper study guides for Renew Microsoft Microsoft Azure Security Technologies certified begins with Microsoft az-500 preparation products which designed to deliver the Actual az-500 questions by making you pass the az-500 test at your first time. Try the free az-500 demo right now.

Online az-500 free questions and answers of New Version:

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (AzureAD). You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials. You need to configure the environment to support the planned authentication.
Solution: You create a site-to-site VPN between the virtual network and the on-premises network. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
You can connect HDInsight to your on-premises network by using Azure Virtual Networks and a VPN gateway.
AZ-500 dumps exhibitNote: To allow HDInsight and resources in the joined network to communicate by name, you must perform the following actions: Create Azure Virtual Network.
AZ-500 dumps exhibitCreate a custom DNS server in the Azure Virtual Network.
AZ-500 dumps exhibitConfigure the virtual network to use the custom DNS server instead of the default Azure Recursive Resolver. Configure forwarding between the custom DNS server and your on-premises DNS server.
References:
https://docs.microsoft.com/en-us/azure/hdinsight/connect-on-premises-network

NEW QUESTION 2
HOTSPOT
You have an Azure subscription that contains the virtual machines shown in the following table.
AZ-500 dumps exhibit
You create the Azure policies shown in the following table.
AZ-500 dumps exhibit
You create the resource locks shown in the following table.
AZ-500 dumps exhibit
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-500 dumps exhibit
References:
https://docs.microsoft.com/en-us/azure/governance/blueprints/concepts/resource-locking

NEW QUESTION 3
You have Azure Resource Manager templates that you use to deploy Azure virtual machines.
You need to disable unused Windows features automatically as instances of the virtual machines are provisioned. What should you use?

  • A. device compliance policies in Microsoft Intune
  • B. Azure Automation State Configuration
  • C. application security groups
  • D. Azure Advisor

Answer: B

Explanation:
You can use Azure Automation State Configuration to manage Azure VMs (both Classic and Resource Manager), on-premises VMs, Linux machines, AWS VMs, and on-premises physical machines.
Note: Azure Automation State Configuration provides a DSC pull server similar to the Windows Feature DSC-Service so that target nodes automatically receive configurations, conform to the desired state, and report back on their compliance. The built-in pull server in Azure Automation eliminates the need to set up and
maintain your own pull server. Azure Automation can target virtual or physical Windows or Linux machines, in the cloud or on-premises.
References:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started

NEW QUESTION 4
HOTSPOT
You assign User8 the Owner role for RG4, RG5, and RG6.
In which resource groups can User8 create virtual networks and NSGs? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: RG4 only
Virtual Networks are not allowed for Rg5 and Rg6.
Box 2: Rg4,Rg5, and Rg6 Scenario:
Contoso has two Azure subscriptions named Sub1 and Sub2.
Sub1 contains six resource groups named RG1, RG2, RG3, RG4, RG5, and RG6. You assign User8 the Owner role for RG4, RG5, and RG6
User8 city Sidney, Role:None
Note: A network security group (NSG) contains a list of security rules that allow or deny network traffic to resources connected to Azure Virtual Networks (VNet). NSGs can be associated to subnets, individual VMs (classic), or individual network interfaces (NIC) attached to VMs (Resource Manager).
References:
https://docs.microsoft.com/en-us/azure/governance/policy/overview

NEW QUESTION 5
HOTSPOT
You plan to use Azure Log Analytics to collect logs from 200 servers that run Windows Server 2021.
You need to automate the deployment of the Microsoft Monitoring Agent to all the servers by using an Azure Resource Manager template. How should you complete the template? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-500 dumps exhibit
References:
https://blogs.technet.microsoft.com/manageabilityguys/2015/11/19/enabling-the-microsoft-monitoring-agent-in-windows-json-templates/

NEW QUESTION 6
You are testing an Azure Kubernetes Service (AKS) cluster. The cluster is configured as shown in the exhibit. (Click the Exhibit tab.)
AZ-500 dumps exhibit
You plan to deploy the cluster to production. You disable HTTP application routing.
You need to implement application routing that will provide reverse proxy and TLS termination for AKS services by using a single IP address. What should you do?

  • A. Create an AKS Ingress controller.
  • B. Install the container network interface (CNI) plug-in.
  • C. Create an Azure Standard Load Balancer.
  • D. Create an Azure Basic Load Balancer.

Answer: A

Explanation:
An ingress controller is a piece of software that provides reverse proxy, configurable traffic routing, and TLS termination for Kubernetes services.
References:
https://docs.microsoft.com/en-us/azure/aks/ingress-tls

NEW QUESTION 7
You have an Azure SQL Database server named SQL1.
You plan to turn on Advanced Threat Protection for SQL1 to detect all threat detection types. Which action will Advanced Threat Protection detect as a threat?

  • A. A user updates more than 50 percent of the records in a table.
  • B. A user attempts to sign as select * from table1.
  • C. A user is added to the db_owner database role.
  • D. A user deletes more than 100 records from the same table.

Answer: B

Explanation:
Advanced Threat Protection can detect potential SQL injections: This alert is triggered when an active exploit happens against an identified application vulnerability to SQL injection. This means the attacker is trying to inject malicious SQL statements using the vulnerable application code or stored procedures.
References:
https://docs.microsoft.com/en-us/azure/sql-database/sql-database-threat-detection-overview

NEW QUESTION 8
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain.
You have an Azure subscription named Sub1 that is associated to an Azure Active Directory (Azure AD) tenant named contoso.com. You plan to deploy Azure AD Connect and to integrate Active Directory and the Azure AD tenant.
You need to recommend an integration solution that meets the following requirements:
AZ-500 dumps exhibitEnsures that password policies and user logon restrictions apply to user accounts that are synced to the tenant Minimizes the number of servers required for the solution.
Which authentication method should you include in the recommendation?

  • A. federated identity with Active Directory Federation Services (AD FS)
  • B. password hash synchronization with seamless single sign-on (SSO)
  • C. pass-through authentication with seamless single sign-on (SSO)

Answer: B

Explanation:
Password hash synchronization requires the least effort regarding deployment, maintenance, and infrastructure. This level of effort typically applies to organizations that only need their users to sign in to Office 365, SaaS apps, and other Azure AD-based resources. When turned on, password hash synchronization is part of the Azure AD Connect sync process and runs every two minutes.
Incorrect Answers:
A: A federated authentication system relies on an external trusted system to authenticate users. Some companies want to reuse their existing federated system investment with their Azure AD hybrid identity solution. The maintenance and management of the federated system falls outside the control of Azure AD. It's up to the organization by using the federated system to make sure it's deployed securely and can handle the authentication load.
C: For pass-through authentication, you need one or more (we recommend three) lightweight agents installed on existing servers. These agents must have access to your on-premises Active Directory Domain Services, including your on-premises AD domain controllers. They need outbound access to the Internet and access to your domain controllers. For this reason, it's not supported to deploy the agents in a perimeter network.
Pass-through Authentication requires unconstrained network access to domain controllers. All network traffic is encrypted and limited to authentication requests.
References:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-pta

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (AzureAD). You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials. You need to configure the environment to support the planned authentication.
Solution: You deploy the On-premises data gateway to the on-premises network. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
Instead, you connect HDInsight to your on-premises network by using Azure Virtual Networks and a VPN gateway.
AZ-500 dumps exhibitNote: To allow HDInsight and resources in the joined network to communicate by name, you must perform the following actions: Create Azure Virtual Network.
AZ-500 dumps exhibitCreate a custom DNS server in the Azure Virtual Network.
AZ-500 dumps exhibitConfigure the virtual network to use the custom DNS server instead of the default Azure Recursive Resolver. Configure forwarding between the custom DNS server and your on-premises DNS server.
References:
https://docs.microsoft.com/en-us/azure/hdinsight/connect-on-premises-network

NEW QUESTION 10
DRAG DROP
You have an Azure subscription that contains 100 virtual machines. Azure Diagnostics is enabled on all the virtual machines. You are planning the monitoring of Azure services in the subscription.
You need to retrieve the following details:
AZ-500 dumps exhibitIdentify the user who deleted a virtual machine three weeks ago.
AZ-500 dumps exhibitQuery the security events of a virtual machine that runs Windows Server 2021.
What should you use in Azure Monitor? To answer, drag the appropriate configuration settings to the correct details. Each configuration setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box1: Activity log
Azure activity logs provide insight into the operations that were performed on resources in your subscription. Activity logs were previously known as “audit logs” or
“operational logs,” because they report control-plane events for your subscriptions.
Activity logs help you determine the “what, who, and when” for write operations (that is, PUT, POST, or DELETE). Box 2: Logs
Log Integration collects Azure diagnostics from your Windows virtual machines, Azure activity logs, Azure Security Center alerts, and Azure resource provider logs. This integration provides a unified dashboard for all your assets, whether they're on-premises or in the cloud, so that you can aggregate, correlate, analyze, and alert for security events.
References:
https://docs.microsoft.com/en-us/azure/security/azure-log-audit
Testlet 1
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Litware, Inc. is a digital media company that has 500 employees in the Chicago area and 20 employees in the San Francisco area.
Existing Environment
Litware has an Azure subscription named Sub1 that has a subscription ID of 43894a43-17c2-4a39-8cfc-3540c2653ef4.
Sub1 is associated to an Azure Active Directory (Azure AD) tenant named litwareinc.com. The tenant contains the user objects and the device objects of all the Litware employees and their devices. Each user is assigned an Azure AD Premium P2 license. Azure AD Privileged Identity Management (PIM) is activated.
The tenant contains the groups shown in the following table.
AZ-500 dumps exhibit
The Azure subscription contains the objects shown in the following table.
AZ-500 dumps exhibit
Azure Security Center is set to the Free tier.
Planned changes
Litware plans to deploy the Azure resources shown in the following table.
AZ-500 dumps exhibit
Litware identifies the following identity and access requirements:
AZ-500 dumps exhibitAll San Francisco users and their devices must be members of Group1.
AZ-500 dumps exhibitThe members of Group2 must be assigned the Contributor role to Resource Group2 by using a permanent eligible assignment.
AZ-500 dumps exhibitUsers must be prevented from registering applications in Azure AD and from consenting to applications that access company information on the users’ behalf.
Platform Protection Requirements
Litware identifies the following platform protection requirements:
AZ-500 dumps exhibitMicrosoft Antimalware must be installed on the virtual machines in Resource Group1.
AZ-500 dumps exhibitThe members of Group2 must be assigned the Azure Kubernetes Service Cluster Admin Role. Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials.
AZ-500 dumps exhibitFollowing the implementation of the planned changes, the IT team must be able to connect to VM0 by using JIT VM access.
AZ-500 dumps exhibitA new custom RBAC role named Role1 must be used to delegate the administration of the managed disks in Resource Group1. Role1 must be available only for Resource Group1.
Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center.

NEW QUESTION 11
You are configuring an Azure Kubernetes Service (AKS) cluster that will connect to an Azure Container Registry.
You need to use the auto-generated service principal to authenticate to the Azure Container Registry. What should you create?

  • A. an Azure Active Directory (Azure AD) group
  • B. an Azure Active Directory (Azure AD) role assignment
  • C. an Azure Active Directory (Azure AD) user
  • D. a secret in Azure Key Vault

Answer: B

Explanation:
When you create an AKS cluster, Azure also creates a service principal to support cluster operability with other Azure resources. You can use this auto-generated service principal for authentication with an ACR registry. To do so, you need to create an Azure AD role assignment that grants the cluster's service principal access to the container registry.
References:
https://docs.microsoft.com/bs-latn-ba/azure/container-registry/container-registry-auth-aks

NEW QUESTION 12
You need to ensure that you can meet the security operations requirements.
What should you do first?

  • A. Turn on Auto Provisioning in Security Center.
  • B. Integrate Security Center and Microsoft Cloud App Security.
  • C. Upgrade the pricing tier of Security Center to Standard.
  • D. Modify the Security Center workspace configuration.

Answer: C

Explanation:
The Standard tier extends the capabilities of the Free tier to workloads running in private and other public clouds, providing unified security management and threat protection across your hybrid cloud workloads. The Standard tier also adds advanced threat detection capabilities, which uses built-in behavioral analytics and machine learning to identify attacks and zero-day exploits, access and application controls to reduce exposure to network attacks and malware, and more.
Scenario: Security Operations Requirements
Litware must be able to customize the operating system security configurations in Azure Security Center. References:
https://docs.microsoft.com/en-us/azure/security-center/security-center-pricing
Question Set 3

NEW QUESTION 13
You have an Azure SQL database.
You implement Always Encrypted.
You need to ensure that application developers can retrieve and decrypt data in the database.
Which two pieces of information should you provide to the developers? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. a stored access policy
  • B. a shared access signature (SAS)
  • C. the column encryption key
  • D. user credentials
  • E. the column master key

Answer: CE

Explanation:
Always Encrypted uses two types of keys: column encryption keys and column master keys. A column encryption key is used to encrypt data in an encrypted column. A column master key is a key-protecting key that encrypts one or more column encryption keys.
References:
https://docs.microsoft.com/en-us/sql/relational-databases/security/encryption/always-encrypted-database-engine

NEW QUESTION 14
DRAG DROP
Your company has an Azure Active Directory (Azure AD) tenant named contoso.com.
The company is developing an application named App1. App1 will run as a service on server that runs Windows Server 2021. App1 will authenticate to contoso.com and access Microsoft Graph to read directory data.
You need to delegate the minimum required permissions to App1.
Which three actions should you perform in sequence from the Azure portal? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Create an app registration
First the application must be created/registered.
Step 2: Add an application permission
Application permissions are used by apps that run without a signed-in user present.
Step 3: Grant permissions
Incorrect Answers: Delegated permission
Delegated permissions are used by apps that have a signed-in user present.
Application Proxy:
Azure Active Directory's Application Proxy provides secure remote access to on-premises web applications.
References:
https://docs.microsoft.com/en-us/azure/active-directory/develop/v2-permissions-and-consent

NEW QUESTION 15
You create a new Azure subscription.
You need to ensure that you can create custom alert rules in Azure Security Center. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  • A. Onboard Azure Active Directory (Azure AD) Identity Protection.
  • B. Create an Azure Storage account.
  • C. Implement Azure Advisor recommendations.
  • D. Create an Azure Log Analytics workspace.
  • E. Upgrade the pricing tier of Security Center to Standard.

Answer: BD

Explanation:
D: You need write permission in the workspace that you select to store your custom alert.
References:
https://docs.microsoft.com/en-us/azure/security-center/security-center-custom-alert

NEW QUESTION 16
HOTSPOT
You have an Azure subscription. The subscription contains Azure virtual machines that run Windows Server 2021.
You need to implement a policy to ensure that each virtual machine has a custom antimalware virtual machine extension installed. How should you complete the policy? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: DeployIfNotExists
DeployIfNotExists executes a template deployment when the condition is met.
Box 2: Template
The details property of the DeployIfNotExists effects has all the subproperties that define the related resources to match and the template deployment to execute. Deployment [required]
This property should include the full template deployment as it would be passed to the Microsoft.Resources/deployment References:
https://docs.microsoft.com/en-us/azure/governance/policy/concepts/effects

NEW QUESTION 17
HOTSPOT
You need to create an Azure key vault. The solution must ensure that any object deleted from the key vault be retained for 90 days.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: -EnablePurgeProtection
If specified, protection against immediate deletion is enabled for this vault; requires soft delete to be enabled as well.
Box 2: -EnableSoftDelete
Specifies that the soft-delete functionality is enabled for this key vault. When soft-delete is enabled, for a grace period, you can recover this key vault and its contents after it is deleted.
References:
https://docs.microsoft.com/en-us/powershell/module/azurerm.keyvault/new-azurermkeyvault

NEW QUESTION 18
DRAG DROP
You are implementing conditional access policies.
You must evaluate the existing Azure Active Directory (Azure AD) risk events and risk levels to configure and implement the policies. You need to identify the risk level of the following risk events:
AZ-500 dumps exhibitUsers with leaked credentials Impossible travel to atypical locations
AZ-500 dumps exhibitSign ins from IP addresses with suspicious activity
Which level should you identify for each risk event? To answer, drag the appropriate levels to the correct risk events. Each level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
AZ-500 dumps exhibitAzure AD Identity protection can detect six types of suspicious sign-in activities: Users with leaked credentials
AZ-500 dumps exhibitSign-ins from anonymous IP addresses Impossible travel to atypical locations
AZ-500 dumps exhibitSign-ins from infected devices
AZ-500 dumps exhibitSign-ins from IP addresses with suspicious activity Sign-ins from unfamiliar locations
These six types of events are categorized in to 3 levels of risks – High, Medium & Low:
AZ-500 dumps exhibit
References:
http://www.rebeladmin.com/2021/09/step-step-guide-configure-risk-based-azure-conditional-access-policies/

NEW QUESTION 19
HOTSPOT
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.
AZ-500 dumps exhibit
You create and enforce an Azure AD Identity Protection user risk policy that has the following settings:
AZ-500 dumps exhibitAssignment: Include Group1, Exclude Group2 Conditions: Sign-in risk of Medium and above Access: Allow access, Require password change
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
User1 is member of Group1. Sign in from unfamiliar location is risk level Medium.
Box 2: Yes
User2 is member of Group1. Sign in from anonymous IP address is risk level Medium.
Box 3: No
Sign-ins from IP addresses with suspicious activity is low.
Note:
AZ-500 dumps exhibit
AZ-500 dumps exhibitAzure AD Identity protection can detect six types of suspicious sign-in activities: Users with leaked credentials
AZ-500 dumps exhibitSign-ins from anonymous IP addresses Impossible travel to atypical locations Sign-ins from infected devices
AZ-500 dumps exhibitSign-ins from IP addresses with suspicious activity Sign-ins from unfamiliar locations
These six types of events are categorized in to 3 levels of risks – High, Medium & Low: References:
http://www.rebeladmin.com/2021/09/step-step-guide-configure-risk-based-azure-conditional-access-policies/

NEW QUESTION 20
HOTSPOT
You have an Azure Active Directory (Azure AD) tenant named contoso.com. The tenant contains the users shown in the following table.
AZ-500 dumps exhibit
You configure an access review named Review1 as shown in the following exhibit.
AZ-500 dumps exhibit
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: User3 only
Use the Members (self) option to have the users review their own role assignments.
Box 2: User3 will receive a confirmation request
Use the Should reviewer not respond list to specify what happens for users that are not reviewed by the reviewer within the review period. This setting does not impact users who have been reviewed by the reviewers manually. If the final reviewer's decision is Deny, then the user's access will be removed.
No change - Leave user's access unchanged Remove access - Remove user's access Approve access - Approve user's access
Take recommendations - Take the system's recommendation on denying or approving the user's continued access
References:
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-how-to-start-security-review

NEW QUESTION 21
DRAG DROP
You need to configure an access review. The review will be assigned to a new collection of reviews and reviewed by resource owners.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Create an access review program Step 2: Create an access review control
Step 3: Set Reviewers to Group owners
In the Reviewers section, select either one or more people to review all the users in scope. Or you can select to have the members review their own access. If the resource is a group, you can ask the group owners to review.
AZ-500 dumps exhibit
References:
https://docs.microsoft.com/en-us/azure/active-directory/governance/create-access-review
https://docs.microsoft.com/en-us/azure/active-directory/governance/manage-programs-controls

NEW QUESTION 22
HOTSPOT
You are evaluating the security of the network communication between the virtual machines in Sub2. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Box 1: Yes
NSG1 has the inbound security rules shown in the following table.
AZ-500 dumps exhibit
NSG2 has the inbound security rules shown in the following table.
AZ-500 dumps exhibit
Box 2: Yes
Box 3: No Note:
Sub2 contains the virtual machines shown in the following table.
AZ-500 dumps exhibit
AZ-500 dumps exhibit
Sub2 contains the network security groups (NSGs) shown in the following table.
AZ-500 dumps exhibit
Question Set 3

NEW QUESTION 23
HOTSPOT
You need to create Role1 to meet the platform protection requirements.
How should you complete the role definition of Role1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
AZ-500 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Scenario: A new custom RBAC role named Role1 must be used to delegate the administration of the managed disks in Resource Group1. Role1 must be available only for Resource Group1.
Azure RBAC template managed disks "Microsoft.Storage/" References:
https://blogs.msdn.microsoft.com/azureedu/2021/02/11/new-managed-disk-storage-option-for-your-azure-vms/

NEW QUESTION 24
......

P.S. DumpSolutions now are offering 100% pass ensure az-500 dumps! All az-500 exam questions have been updated with correct answers: https://www.dumpsolutions.com/az-500-dumps/ (58 New Questions)