Act now and download your CompTIA jn0-361 test today! Do not waste time for the worthless CompTIA jn0-361 tutorials. Download Rebirth CompTIA Service Provider Routing and Switching, Specialist Exam exam with real questions and answers and begin to learn CompTIA jn0-361 with a classic professional.
Online CompTIA jn0-361 free dumps demo Below:
NEW QUESTION 1
What are three label operations that an MPLS-enabled router performs? (Choose three.)
- A. swap
- B. push
- C. pop
- D. insert
- E. rewrite
Answer: ABC
NEW QUESTION 2
Which two statements are correct about default BGP route propagation? (Choose two.)
- A. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
- B. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
- C. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
- D. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
Answer: BC
NEW QUESTION 3
Which three statements are true about GRES? (Choose three.)
- A. Kernel information is preserved.
- B. Interface information is preserved.
- C. GRES requires only one RE.
- D. GRES requires redundant REs.
- E. Control plane information is preserved.
Answer: ABD
NEW QUESTION 4
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 1
- B. Router 4
- C. Router 2
- D. Router 3
Answer: B
NEW QUESTION 5
Click the exhibit.
Referring to the exhibit, which configuration must be set on R2 to from a Level 1 IS-IS adjacency with R1?
- A. Set interfaces lo0 unit 0 family iso address 49.0001.3415.0010.0250.0000.0046.00
- B. Set interfaces lo0 unit 0 family iso address 49.0002.3414.0010.0250.0000.0046.00
- C. Set interfaces lo0 unit 0 family iso address 49.0002.3415.0010.0250.0000.0046.00
- D. Set interfaces lo0 unit 0 family iso address 49.0001.3414.0010.0250.0000.0046.00
Answer: A
NEW QUESTION 6
Click the Exhibit.
The router with the configuration shown in the exhibit has two interfaces, both of which are operational and can pass traffic. These interfaces are connected to two different routers, both of which are configured for OSPF area 0.0.0.1. The router has received LSAs and can now send traffic into the backbone area.
Which two statements are correct? (Choose two.)
- A. The router is an ASBR.
- B. The router has only a single OSPF adjacency.
- C. The router is an ABR.
- D. The router has two OSPF adjacencies.
Answer: AB
NEW QUESTION 7
An IS-IS TLV includes which two attributes? (Choose two.)
- A. Topology
- B. Vector
- C. Length
- D. Value
Answer: CD
NEW QUESTION 8
A customer pays for the bandwidth on a per-packet basis. The network administrator wants to constrain costs and prevent Layer 2 loops on a multihomed Layer 2 WAN network.
Which technology would satisfy these requirements?
- A. Rapid Spanning Tree Protocol
- B. Multiple Spanning Tree Protocol
- C. Loop protection
- D. MPLS over GRE
Answer: C
NEW QUESTION 9
Click the Exhibit.
Referring to the exhibit, R-1 and R-2 are connected with a LAG on the ae0 interface. However, the LAG is not operational.
Which action will solve this problem?
- A. Change one device to use LACP passive mode.
- B. Change the system ID on one device.
- C. Set the LACP system priority to a non-zero value on one device.
- D. Set the LACP system priority to a non-zero value on both devices.
Answer: B
NEW QUESTION 10
Click the Exhibit.
You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?
- A. Type external
- B. Type internal
- C. Export <policy name>
- D. As -override
Answer: B
NEW QUESTION 11
What is the OSPFv3 router ID?
- A. 0.0.0.0
- B. 192.168.1.1
- C. 2001::1:2
- D. 2001::192.168.1.1
Answer: B
NEW QUESTION 12
What must be configured for all IBGP speakers in an AS to have consistent routing information?
- A. Partial mesh of EBGP sessions between EBGP speakers
- B. Default routes to the IBGP gateways
- C. Static routes to the EBGP gateways
- D. Full mesh of IBGP sessions between IBGP speakers
Answer: D
NEW QUESTION 13
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)
- A. PDUs contain different TLVs.
- B. TLVs contain different PDUs.
- C. The TLV attributes are type, length, and value.
- D. The TLV attributes are tim
- E. Length, and variable.
Answer: AC
NEW QUESTION 14
Click the Exhibit.
Referring to the exhibit, the GRE tunnel between R-1 and R2 allows connectivity between User-1 and Server-1. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size.
However, if the packet size is larger than 1448, User-1 cannot communicate with Server-1. In this scenario, how do you solve the communication problem?
- A. Change the physical MTU on the ge-0/0/3 interfaces on R-1 and R-2 to 1448 bytes.
- B. Change the physical MTU on the gr-0/0/0 interfaces on R-1 and R-2 to 1448 bytes.
- C. Apply the allow-fragmentation statement to the GRE tunnel configuration.
- D. Apply the path-mtu-discovery statement to the GRE tunnel configuration.
Answer: C
NEW QUESTION 15
What is the correct simplification of the 2001:0000:0000:0234F:0000:CBFF:5CA1:A001 IPv6 address?
- A. 2001::234F:0 :CBFF:5CA1:A001
- B. 2001:0:0:234F:0:CBFF:5CA1:A1
- C. 2001::234F:CBFF:5CA1:A001
- D. 2001::234F::CBFF:5CA1:A001
Answer: A
NEW QUESTION 16
Click the Exhibit.
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
- A. Apply the next-hop-self as an export policy to the external BGP peers.
- B. Apply the next-hop-self as an import policy to the external BGP peers.
- C. Apply the next-hop-self as an export policy to the internal BGP peers.
- D. Apply the next-hop-self as an import policy to the internal BGP peers.
Answer: C
NEW QUESTION 17
You are setting up a new IS-IS adjacency between two devices. The new Level1 adjacency is not establishing.
What would cause this behavior?
- A. The routers support a minimum MTU of 1492 bytes.
- B. The Level 1 routers have mismatched area IDs.
- C. The router ID has not been explicitly configured.
- D. The IP addresses are on different subnets.
Answer: B
NEW QUESTION 18
You are using RSVP to signal an MPLS LSP. Which statement is true in this scenario?
- A. LSPs can be configured without any traffic engineering constraints.
- B. The traffic engineering database must be used for all LSPs.
- C. A primary path must be configured to establish an LSP.
- D. A secondary path must be configured to establish an LSP.
Answer: A
NEW QUESTION 19
Because of recent network failures, additional circuits have been purchased. In addition, Fast reroute has been configured on critical MPLS LSPs.
When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.)
- A. The amount of time required to reroute the traffic onto the detour
- B. The amount of time to detect a link or node failure
- C. The amount of time required to recalculate the best detour
- D. The amount of time it takes to ping the gateway on the detour link
Answer: AB
NEW QUESTION 20
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
- A. MAC movement protection
- B. Loop protection
- C. BPDU protection
- D. Root protection
Answer: B
NEW QUESTION 21
......
P.S. Certleader now are offering 100% pass ensure jn0-361 dumps! All jn0-361 exam questions have been updated with correct answers: https://www.certleader.com/jn0-361-dumps.html (65 New Questions)
