How Many Questions Of 350-601 Exam Prep

NEW QUESTION 1
Drag and drop the NAS features from the left onto the NAS descriptions on the right. Not all features are used

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 2
Which two statements describe the process of upgrading an EPLD on a Cisco MUS 9000 Series Switch? (Choose two)

• A. EPLDs are capable to be upgraded without replacing the hardware
• B. The CPLDs for all the modules on a switch must be upgraded at the same time
• C. An upgrade verification identifies the impact of each EPLD upgrade
• D. EPLDs are only capable to be upgraded to the latest F
• E. D image
• F. EPLD upgrades are capable to be completed without powering down the module during the upgrade

Answer: AC

NEW QUESTION 3
Refer to the exhibit.

An engineer must schedule the firmware upgrade of the Red1 and Red2 leaf switches. The requirement is to keep the upgrade time to the minimum, avoid any service impact, and perform the parallel upgrade Which set of scheduler attributes must be used to meet these requirements?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 4
An engineer must configure an LACP port channel on two Cisco Nexus 7000 Series Switches. The interface e1/2 must be a hot-standby link that initiates negotiation with other ports Drag and drop the commands from the right onto the blanks in the configuration on the left Not all commands are used

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5
An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials. Which protocol must be configured on the switches to allow automated onboarding?

• A. SNMP
• B. Telnet
• C. SSH
• D. HTTPS

Answer: C

NEW QUESTION 6
Refer to the exhibit.

A network engineer must create an EEM script that saves a copy of the running configuration to bootftash and writes a message to syslog when a user saves the configuration to a Cisco Nexus 9000 Series Switch. Which command completes the configuration set?

• A. running-config
• B. policy-default
• C. syslog-config
• D. event-default

Answer: A

NEW QUESTION 7
An engineer troubleshoots an Fibre Channel deployment on a Cisco MDS 9000 Series Switch. What does this output indicate about port channel 1?

• A. Port channel 1 is configured to be an ISL.
• B. Port channel 1 is configured to connect to a host bus adapter.
• C. Port channel 1 is configured to connect to an NPIV switch.
• D. Port channel 1 is configured to connect to an NPV switch.

Answer: A

NEW QUESTION 8
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of a UCS C-series rack mount server.
What setting will accomplish this goal?

• A. C0/C1 state
• B. C6 Retention
• C. C2 state
• D. C6 non-Retention

Answer: B

NEW QUESTION 9
An engineer upgrades the bash on the Cisco Nexus 9000 Series Switch.

Which command must be sed to complete the task?

• A. rpm -qa
• B. rpm -Uhv
• C. upgrade -U
• D. update -vh

Answer: B

NEW QUESTION 10
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements:
• Establish adjacency to the remote peer by using multicast.
• Enable OTV advertisements for VLAN 100 to the other site.
Which two commands should be configured to meet these requirements? (Choose two.)

• A. otv site-vlan 100
• B. otv data-group 232.2.2.0/28
• C. otv use-adjacency-server 172.27.255.94
• D. otv extend-vlan 100
• E. otv control-group 232.1.1.1

Answer: DE

Explanation:
https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/guide_c07-728315 https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/OTV/config_guide/b_Cisco_Nexus_7000_

NEW QUESTION 11
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?

• A. offline encryption acceleration
• B. increased network throughput
• C. GPU acceleration
• D. Increased compression efficiency

Answer: D

Explanation:

https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/ b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most%20storage%20workloads.

NEW QUESTION 12
Which two hypervisors does Cisco HyperFlex support? (Choose two.)

• A. VMware vSphere
• B. Microsoft Hyper-V
• C. OpenStack
• D. Citrix XenServer
• E. RedHat KVM

Answer: AB

Explanation:

https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx-series/ solution-overview-c22-736815.pdf

NEW QUESTION 13
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14
A bridge domain is being extended out of a Cisco ACI fabric. Between which of these components are policies used to identify the connectivity between Endpoint Groups and the external connection?

• A. an external bridge domain and an external routed domain
• B. internal contracts and external contracts
• C. internal EPGs and external EPGs
• D. L2Out and L3Out

Answer: D

NEW QUESTION 15
A customer deploys a media server to distribute streaming videos to network clients. The requirement is to allow the video feed to reach only requesting clients. The shared trees must not propagate the video feed if no clients from that tree request it. To reduce configuration touchpoints, the solution must support the automatic discovery and announcement of RP-set information. Each router in the network is responsible for selecting the RP. Which configuration set meets these requirements?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 16
A network engineer must prevent data comuption due to cross fabric communication in an FCoE environment. Which configuration must be applied to the Cisco Nexus Unified Switches to achieve this objective?

• A. Switch(config)#fcoe fcmap 0e,fc,2a
• B. Switch(config-if)# no fcoe fcf-priority 0
• C. Switch(config-if) # shutdown lan
• D. Switch(config) # no fcoe fcf-priority

Answer: A

Explanation:

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/ b_Cisco_Nexus_5000_Series_NX-OS_Fibre_Channel_over_Ethernet_Configuration_Guide_/ Cisco_Nexus_5000_Series_NX-OS_Fibre_Channel_over_Ethernet_Configuration_Guide chapter3.html
You can prevent data corruption due to cross-fabric talk by configuring an FC-Map that identifies the Fibre Channel fabric for this Cisco Nexus device. When the FC-Map is configured, the switch discards the MAC addresses that are not part of the current fabric.
switch(config)# fcoe fcmap fabric-map Configures the global FC-Map. The default value is 0E.FC.00. The range is from 0E.FC.00 to 0E.FC.FF. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/513_n1_1/b_Cisco_n5k_fcoe_co

NEW QUESTION 17
An engineer must perform a software upgrade on a production Cisco Nexus 7000 Series Switch. Before the upgrade activity, the requirement is for all ports to be shut down and routing protocols to terminate gracefully.
Which feature must be used to meet these requirements?

• A. Configuration Profile
• B. Maintenance Mode Profile
• C. Switch Profile
• D. Service Profile Template

Answer: B

NEW QUESTION 18
An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)

• A. A contract must be defined between the EPGs
• B. The EPGs must be linked to the correct physical domain
• C. The EPGs must link directly to the corresponding AAEP
• D. The corresponding bridge domains must be configured in legacy mode
• E. The EPGs must be configured as static ports

Answer: BE

Explanation:
Attach EPG to Physical Domain (to AAEP through it) and add static ports to EPG
Contract is needed to allow communication between two EPGs, or EPG and L3out or between two L3out

NEW QUESTION 19
Which virtual MAC address is the default for HSRP version 2 group 10?

• A. 0000.5E00.0110
• B. 0000.0C9F.F00A
• C. 3716.1350.1C0A
• D. 0000.0C9F.F010

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3s-book/fhp-hsrp-v2.h

NEW QUESTION 20
Refer to the exhibit.

The Cisco Nexus Series Switches SW1, SW2, and SW3 are connected via Layer 2 copper interfaces. An engineer implements loop prevention standard IEEE 802.1w on each VLAN lo provide lasier recovery from network changes or failures. The Implementation has these requirements
Interfaces that are connected to Layer 2 hosts must not receive STP BPDUs.
The implementation must detect unidirectional links due to one-way traffic twisted-pair links
Bridge assurance must be enabled between SW2 and SW3
The Layer 2 domain must be protected from superior BPDUs that arrive from external switches.
Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration for SW3. Not all code snippets are used.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 21
......