Top 15 tutorials 70-412 for candidates (136 to 150)

Exam Code: 70-412 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Configuring Advanced Windows Server 2012 Services
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-412 Exam.

2016 Apr 70-412 Study Guide Questions:

Q136. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named Server1 and Server2. Both servers have multiple IPv4 scopes. 

Server1 and Server2 are used to assign IP addresses for the network IDs of 172.20.0.0/16 and 131.107.0.0/16. 

You install the IP Address Management (IPAM) Server feature on a server named IPAM1 and configure IPAM1 to manage Server1 and Server2. 

Some users from the 172.20.0.0 network report that they occasionally receive an IP address conflict error message. 

You need to identify whether any scopes in the 172.20.0.0 network ID conflict with one another. 

What Windows PowerShell cmdlet should you run? 

To answer, select the appropriate options in the answer area. 


Answer: 



Q137. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. 

The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA). 

All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card. 

A user named User1 resigned and started to work for a competing company. 

You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain. 

Which tool should you use? 

A. Active Directory Administrative Center 

B. Certificate Templates 

C. The Security Configuration Wizard 

D. The Certificates snap-in 

Answer: A 

Explanation: 

To disable or enable a user account using Active Directory Administrative Center 

1. To open Active Directory Administrative Center, click Start , click Administrative Tools , 

and then click Active Directory Administrative Center . 

To open Active Directory Users and Computers in Windows Server 2012, click Start , type 

dsac.exe . 

2. In the navigation pane, select the node that contains the user account whose status you 

want to change. 

3. In the management list, right-click the user whose status you want to change. 

4. Depending on the status of the user account, do one of the following: . uk.co.certification.simulator.questionpool.PList@ed88a30 

Reference: Disable or Enable a User Account 


Q138. Your network contains two Active Directory forests named contoso.com and adatum.com. 

Contoso.com contains one domain. Adatum.com contains a child domain named child.adatum.com. 

Contoso.com has a one-way forest trust to adatum.com. Selective authentication is enabled on the forest trust. 

Several user accounts are migrated from child.adatum.com to adatum.com. 

Users report that after the migration, they fail to access resources in contoso.com. The users successfully accessed the resources in contoso.com before the accounts were migrated. 

You need to ensure that the migrated users can access the resources in contoso.com. 

What should you do? 

A. Replace the existing forest trust with an external trust. 

B. Run netdom and specify the /quarantine attribute. 

C. Disable SID filtering on the existing forest trust. 

D. Disable selective authentication on the existing forest trust. 

Answer: C 

Explanation: 

Security Considerations for Trusts Need to gain access to the resources in contoso.com 

Disabling SID Filter Quarantining on External Trusts Although it reduces the security of your forest (and is therefore not recommended), you can disable SID filter quarantining for an external trust by using the Netdom.exe tool. You should consider disabling SID filter quarantining only in the following situations: 

* Users have been migrated to the trusted domain with their SID histories preserved, and 

you want to grant them access to resources in the trusting domain based on the SID history 

attribute. 

Etc. 

Incorrect: 

Not B. Enables administrators to manage Active Directory domains and trust relationships 

from the command prompt, /quarantine Sets or clears the domain quarantine. 

Not D. Selective authentication over a forest trust restricts access to only those users in a 

trusted forest who have been explicitly given authentication permissions to computer 

objects (resource computers) that reside in the trusting forest. 

Reference: Security Considerations for Trusts 

http://technet.microsoft.com/en-us/library/cc755321(v=ws.10).aspx 


Q139. HOTSPOT 

Your network contains an Active Directory forest named contoso.com that contains a single 

domain. The forest contains three sites named Site1, Site2, and Site3. 

Domain controllers run either Windows Server 2008 R2 or Windows Server 2012 R2. 

Each site contains two domain controllers. Site1 and Site2 contain a global catalog server. 

You need to create a new site link between Site1 and Site2. The solution must ensure that 

the site link supports the replication of all the naming contexts. 

From which node should you create the site link? 

To answer, select the appropriate node in the answer area. 


Answer: 



Q140. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed. 

You are creating a file management task as shown in the exhibit. (Click the Exhibit button.) 


You need to ensure that the Include all folders that store the following kinds of data list displays an entry named Corporate Data. 

What should you do? 

A. Create a new file group. 

B. Create a new classification property. 

C. Modify the properties of the System Files file group. 

D. Modify the Folder Usage classification property. 

Answer: B 

Explanation: 

Classification properties are used to assign values to files. Reference: Working with File Classification 


70-412 test

Up to the minute 70-412 practice:

Q141. DRAG DROP 

Your network contains two Active Directory forests named contoso.com and adatum.com. All domain controllers run Windows Server 2012 R2. 

A federated trust exists between adatum.com and contoso.com. The trust provides adatum.com users with access to contoso.com resources. 

You need to configure Active Directory Federation Services (AD FS) claim rules for the federated trust. 

The solution must meet the following requirements: 

. In contoso.com, replace an incoming claim type named Group with an outgoing claim type named Role. . In adatum.com, allow users to receive their tokens for the relying party by using their Active Directory group membership as the claim type. 

The AD FS claim rules must use predefined templates. 

Which rule types should you configure on each side of the federated trust? 

To answer, drag the appropriate rule types to the correct location or locations. Each rule type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 


Answer: 



Q142. Your network contains one Active Directory domain named contoso.com. The domain contains three users named User1, User2, and User3. 

You need to ensure that the users can log on to the domain by using the user principal names (UPNs) shown in the following table. 


What should you use? 

A. the Set-ADDomain cmdlet 

B. the Add-DNSServerSecondaryZone cmdlet 

C. the Setspn command 

D. the Set-ADUser cmdlet 

Answer: D 

Reference: Technet, Set-ADUser https://technet.microsoft.com/en-us/library/ee617215.aspx 


Q143. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs a Server Core installation of Windows Server 2012 R2. 

You need to deploy a certification authority (CA) to Server1. The CA must support the auto-enrollment of certificates. 

Which two cmdlets should you run? (Each correct answer presents part of the solution. 

Choose two.) 

A. Add-CAAuthoritylnformationAccess 

B. Install-AdcsCertificationAuthority 

C. Add-WindowsFeature 

D. Install-AdcsOnlineResponder 

E. Install-AdcsWebEnrollment 

Answer: B,E 

Explanation: 

Explanation 

B. The Install-AdcsCertificationAuthority cmdlet performs installation and configuration of 

the AD CS CA role service. It can be used to install a root CA. 

Example: 

Install-AdcsCertificationAuthority –CAType StandaloneRootCA –CACommonName 

"ContosoRootCA" –KeyLength 2048 –HashAlgorithm SHA1 –CryptoProviderName 

"RSA#Microsoft Software Key Storage Provider" 

E: The Install-AdcsWebEnrollment cmdlet performs initial installation and configuration of 

the Certification Authority Web Enrollment role service. 

Note: Prior to the availability of Certificate Enrollment Web Services, AD CS required that client computers configured for certificate auto-enrollment be connected directly to the corporate network. Certificate Enrollment Web Services allows organizations to enable AD CS using a perimeter network. This allows users and computers outside the corporate network to enroll for certificates. 


Certificate Enrollment web service 

Reference: Deploying AD CS Using Windows PowerShell 


Q144. HOTSPOT 

Your company has a primary data center and a disaster recovery data center. 

The network contains an Active Directory domain named contoso.com. The domain 

contains a server named that runs Windows Server 2012 R2. Server1 is located in the 

primary data center. 

Server1 has an enterprise root certification authority (CA) for contoso.com. 

You deploy another server named Server2 to the disaster recovery data center. 

You plan to configure Server2 as a secondary certificate revocation list (CRL) distribution point. 

You need to configure Server2 as a CRL distribution point (CDP). 

Which tab should you use to configure the required CDP entry? To answer, select the appropriate tab in the answer area. 


Answer: 



Q145. DRAG DROP 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. 

You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join. 

You run nslookup enterprise registration and you receive the following results: 


You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation. 

How should you configure the certificate request? 

To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 


Answer: 



70-412 actual test

Simulation 70-412 testing bible:

Q146. Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2 are nodes in a failover cluster named Cluster1. The network contains two servers named Server3 and Server4 that run Windows Server 2012 R2. Server3 and Server4 are nodes in a failover cluster named Cluster2. 

You need to move all of the applications and the services from Cluster1 to Cluster2. 

What should you do first from Failover Cluster Manager? 

A. On a server in Cluster2, configure Cluster-Aware Updating. 

B. On a server in Cluster2, click Move Core Cluster Resources, and then click Best Possible Node. 

C. On a server in Cluster1, click Move Core Cluster Resources, and then click Best Possible Node. 

D. On a server in Cluster1, click Migrate Roles. 

Answer: D 

Explanation: 


Incorrect: 

Not A. Cluster Aware Updating can greatly simplify the process of applying operating 

system patches to Windows Server 2012 or 2012 R2 failover cluster nodes. 

Not B. Not C. Move Core Cluster Resources is used to resources from one node to another 

within the same cluster. 

Reference: Migrating Clustered Services and Applications to Windows Server 2012, 

Migration Between Two Multi-Node Clusters 

https://technet.microsoft.com/en-us/library/dn486774.aspx#BKMK_Steps_for_migrating 


Q147. HOTSPOT 

Your company has a main office and a branch office. An Active Directory site exists for each office. 

The network contains an Active Directory forest named contoso.com. The contoso.com domain contains three member servers named Server1, Server2, and Server3. All servers run Windows Server 2012 R2. 

In the main office, you configure Server1 as a file server that uses BranchCache. 

In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers. 

You are creating a Group Policy for the branch office site. 

Which two Group Policy settings should you configure? 

To answer, select the appropriate two settings in the answer area. 


Answer: 



Q148. You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server 2012 R2. 

You need to force every node in Cluster1 to contact immediately the Windows Server Update Services (WSUS) server on your network for updates. 

Which tool should you use? 

A. The Add-CauClusterRole cmdlet 

B. The Wuauclt command 

C. The Wusa command 

D. The Invoke-CauScan cmdlet 

Answer: A 

Explanation: 

The Add-CauClusterRole cmdlet adds the Cluster-Aware Updating (CAU) clustered role 

that provides the self-updating functionality to the specified cluster. When the CAU 

clustered role has been added to a cluster, the failover cluster can update itself on the 

schedule that is specified by the user, without requiring an external computer to coordinate 

the cluster updating process. 

Incorrect: 

Not B. The wuauclt utility allows you some control over the functioning of the Windows 

Update Agent. It is updated as part of Windows Update. 

The following are the command line for wuauclt. 

OptionDescription 

/a /ResetAuthorization 

Initiates an asynchronous background search for applicable updates. If Automatic Updates 

is disabled, this option has no effect. 

/r /ReportNow 

Sends all queued reporting events to the server asynchronously. 

/? /h /help 

Shows this help information. 

Not D. 

The Invoke-CauScan cmdlet performs a scan of cluster nodes for applicable updates and 

returns a list of the initial set of updates that would be applied to each node in a specified 

cluster. 

Note: The Invoke-CauRun cmdlet performs a scan of cluster nodes for applicable updates 

and installs those updates via an Updating Run on the specified cluster. 

Reference: Add-CauClusterRole 

http://technet.microsoft.com/en-us/library/hh847235(v=wps.620).aspx 


Q149. HOTSPOT 

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. Server1 is a BranchCache hosted cache server that is located in a branch office. 

The network contains client computers that run either Windows 7 or Windows 8. 

For the branch office, all of the user accounts and the client computer accounts are located in an organizational unit (OU) named Branch1. A Group Policy object (GPO) named GPO1 is linked to Branch 1. GPO1 contains the BranchCache settings. 

You discover that users in the branch office who have client computers that run Windows 7 do not access cached content from Server1. Users in the branch office who have Windows 8 computers access cached content from Server1. 

You need to configure the Windows 7 computers to use BranchCache on Server1. Which setting should you configure in GPO1? 

To answer, select the appropriate setting in the answer area. 


Answer: 



Q150. You have a server named Server1 that runs Windows Server 2012 R2. 

You modify the properties of a system driver and you restart Server1. 

You discover that Server1 continuously restarts without starting Windows Server 2012 R2. 

You need to start Windows Server 2012 R2 on Server1 in the least amount of time. The 

solution must minimize the amount of data loss. 

Which Advanced Boot Option should you select? 

A. Repair Your Computer 

B. Last Known Good Configuration (advanced) 

C. Disable Driver Signature Enforcement 

D. Disable automatic restart on system failure 

Answer: B 

Explanation: 

Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer. 

Reference: Using Last Known Good Configuration