What Refresh 156-315.77 Is?

Downloadable Exam Engine regarding 156-315.77,Whatsoever key factors to the exam are included in the 156-315.77 training materials at Actualtests. Youll be able to download the Check Point simulated tests regarding free. The professional writers of Actualtests ensure to current the appropriate and precise 156-315.77 practice questions in the training materials. All of us provide the Check Point questions along with answers in Pdf formatting. They are reputable and most recent Check Point tests.

2016 Dec 156-315.77 testing engine

Q1. - (Topic 5) 

From the following output of cphaprob state, 

which ClusterXL mode is this? 

A. Load Balancing Mode 

B. Multicast mode 

C. Unicast mode 

D. New mode 

E. Legacy mode 

Answer:


Q2. - (Topic 8) 

Your expanding network currently includes ClusterXL running Multicast mode on two members, as shown in this topology: 

A. You need to add interfaces: 10.10.10.1/24 on Member A, and 10.10.10.2/24 on Member 

B. The virtual IP address for these interfaces is 10.10.10.3/24. Both cluster gateways have a Quad card with an available eth3 interface. What is the correct procedure to add these interfaces? 

B. 1. Disable "Cluster membership" from one Gateway via cpconfig. 

2.

 Configure the new interface via sysconfig from the "non-member" Gateway. 

3.

 Re-enable "Cluster membership" on the Gateway. 

4.

 Perform the same steps on the other Gateway. 

5.

 Update the topology in the cluster object. 

6.

 Install the Security Policy. 

C. 1. Configure the new interface on both members using WebUI. 

2.

 Update the new topology in the cluster object from SmartDashboard. 

3.

 Define virtual IP in the Dashboard 

4.

 Install the Security Policy. 

D. 1. Use WebUI to configure the new interfaces on both member. 

2.

 Update the topology in the cluster object. 

3.

 Reboot both gateways. 

4.

 Install the Security Policy. 

E. 1. Use the command ifconfig to configure and enable the new interface on both members. 

2.

 Update the topology in the cluster object for the cluster and both members. 

3.

 Install the Security Policy. 

4.

 Reboot the gateway. 

Answer:


Q3. - (Topic 8) 

Match the ClusterXL modes with their configurations. Exhibit: 

A. A-2, B-3, C-4, D-1 

B. A-2, B-3, C-1, D-5 

C. A-3, B-5, C-1, D-4 

D. A-5, B-2, C-4, D-1 

Answer:


Q4. - (Topic 6) 

What happens when an Administrator activates the DLP Portal for Self Incident Handling and enters its fully qualified domain name (DNS name)? 

A. Connections created between the user and the DLP Gateway when clicking links within e-mail notifications to send or discard quarantined e-mails (matched for an Ask User rule) are encrypted. 

B. The daemon running DLP Portal starts to run and can cater requests from users' browsers (following links from e-mail notifications) and from Check PointUser Check. 

C. The DLP Gateway can now notify Data Owners about DLP incidents. 

D. User Checkis activated. 

Answer:


Q5. CORRECT TEXT - (Topic 8) 

Checkpoint 156-315.77 : Practice Test 

Complete this statement. To save interface information before upgrading a Windows Gateway, use command 

Answer: ipconfig -a > [filename].txt 


Rebirth 156-315.77 vce:

Q6. CORRECT TEXT - (Topic 8) 

Fill in the blank. To remove site-to-site IKE and IPSEC keys you would enter command ____ ___ and select the option to delete all IKE and IPSec SA’s. 

Answer: vpn tu 


Q7. - (Topic 2) 

You can NOT useSmart Dashboard’sSmart Directoryfeatures to connect to the LDAP server. What should you investigate? 

1. Verify you have read-only permissions as administrator for the operating system. 

2. Verify there are no restrictions blockingSmart Dashboard’sUser Manager from connecting to the LDAP server. 

3. Check that the Login Distinguished Name configured has root (Administrator) permission (or at least write permission) in the access control configuration of the LDAP server. 

A. 1 and 3 

B. 2 and 3 

C. 1 and 2 

D. 1, 2, and 3 

Answer:


Q8. - (Topic 7) 

Which Check Point tool allows you to open a debug file and see the VPN packet exchange 

details. 

A. PacketDebug.exe 

B. VPNDebugger.exe 

C. IkeView.exe 

D. IPSECDebug.exe 

Answer:


Q9. - (Topic 2) 

What command will allow you to disable sync on a cluster firewall member? 

A. fw ctl syncstat stop 

B. fw ctl setsync off 

C. fw ctl setsync 0 

D. fw ctl syncstat off 

Answer:


Q10. - (Topic 8) 

Which statement is TRUE for route-based VPN’s? 

A. IP Pool NAT must be configured on each Gateway. 

B. Dynamic-routing protocols are not required. 

C. Route-based VPN’s are a form of partial overlap VPN Domain. 

D. Route-based VPN’s replace domain-based VPN’s. 

Answer:



see more 156-315.77 dumps