♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 200-125 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 200-125 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/200-125-exam-dumps.html
Q151. - (Topic 7)
Scenario:
Refer to the topology. Your company has decided to connect the main office with three
other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.
An OSPF neighbor adjacency is not formed between R3 in the main office and R4 in the Branch1 office. What is causing the problem?
A. There is an area ID mismatch.
B. There is a Layer 2 issue; an encapsulation mismatch on serial links.
C. There is an OSPF hello and dead interval mismatch.
D. The R3 router ID is configured on R4.
Answer: A
Explanation:
A show running-config command on R3 and R4 shows that R4 is incorrectly configured for area 2:
Q152. - (Topic 8)
Which switching method duplicates the first six bytes of a frame before making a switching decision?
A. fragment-free switching
B. store and-forward switching
C. cut through switching
D. ASIC switching
Answer: C
Explanation: Cut and Through method has lowest latency. In this method Switch only read first six bytes from frame after the preamble. These six bytes are the destination address of frame. This is the fastest method of switching. This method also processes invalid frames. Only advantage of this method is speed.
Q153. CORRECT TEXT - (Topic 4)
A corporation wants to add security to its network. The requirements are:
✑ Host B should be able to use a web browser (HTTP) to access the Finance Web Server.
✑ Other types of access from host B to the Finance Web Server should be blocked.
✑ All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.
✑ All hosts in the Core and on local LAN should be able to access the Public Web Server.
You have been tasked to create and apply a numbered access list to a single outbound interface. This access list can contain no more than three statements that meet these requirements.
Access to the router CLI can be gained by clicking on the appropriate host.
✑ All passwords have been temporarily set to “cisco”.
✑ The Core connection uses an IP address of 198.18.132.65.
✑ The computers in the Hosts LAN have been assigned addresses of 192.168.201.1
– 192.168.201.254.
✑ host A 192.168.201.1
✑ host B 192.168.201.2
✑ host C 192.168.201.3
✑ host D 192.168.201.4
✑ The Finance Web Server has been assigned an address of 172.22.237.17.
✑ The Public Web Server in the Server LAN has been assigned an address of 172.22.237.18.
Answer:
Please check the below explanation for all details.
Explanation:
We should create an access-list and apply it to the interface that is connected to the Server LAN because it can filter out traffic from both S2 and Core networks. To see which interface this is, use the “show ip interface brief” command:
Macintosh HD:Users:danielkeller:Desktop:Screen Shot 2015-11-17 at 3.24.34 PM.png From this, we know that the servers are located on the fa0/1 interface, so we will place our numbered access list here in the outbound direction.
Corp1#configure terminal
Our access-list needs to allow host B – 192.168125.2 to the Finance Web Server 172.22.109.17 via HTTP (port 80), so our first line is this:
Corp1(config)#access-list 100 permit tcp host 192.168.125.2 host 172.22.109.17 eq 80
Then, our next two instructions are these:
✑ Other types of access from host B to the Finance Web Server should be blocked.
✑ All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.
This can be accomplished with one command (which we need to do as our ACL needs to be no more than 3 lines long), blocking all other access to the finance web server: Corp1(config)#access-list 100 deny ip any host 172.22.109.17
Our last instruction is to allow all hosts in the Core and on the local LAN access to the Public Web Server (172.22.109.18)
Corp1(config)#access-list 100 permit ip host 172.22.109.18 any Finally, apply this access-list to Fa0/1 interface (outbound direction) Corp1(config)#interface fa0/1
Corp1(config-if)#ip access-group 100 out
Notice: We have to apply the access-list to Fa0/1 interface (not Fa0/0 interface) so that the access-list can filter traffic coming from both the LAN and the Core networks.
To verify, just click on host B to open its web browser. In the address box type
http://172.22.109.17 to check if you are allowed to access Finance Web Server or not. If
your configuration is correct then you can access it.
Click on other hosts (A, C and D) and check to make sure you can’t access Finance Web Server from these hosts. Then, repeat to make sure they can reach the public server at 172.22.109.18. Finally, save the configuration
Corp1(config-if)#end
Corp1#copy running-config startup-config
Q154. - (Topic 3)
What information does a router running a link-state protocol use to build and maintain its topological database? (Choose two.)
A. hello packets
B. SAP messages sent by other routers
C. LSAs from other routers
D. beacons received on point-to-point links
E. routing tables received from other link-state routers
F. TTL packets from designated routers
Answer: A,C
Explanation:
Neighbor discovery is the first step in getting a link state environment up and running. In keeping with the friendly neighbor terminology, a Hello protocol is used for this step. The protocol will define a Hello packet format and a procedure for exchanging the packets and processing the information the packets contain.
After the adjacencies are established, the routers may begin sending out LSAs. As the term flooding implies, the advertisements are sent to every neighbor. In turn, each received LSA
is copied and forwarded to every neighbor except the one that sent the LSA.
Q155. - (Topic 5)
What are the alert messages generated by SNMP agents called?
A. TRAP
B. INFORM
C. GET
D. SET
Answer: A,B
Explanation:
A TRAP is a SNMP message sent from one application to another (which is typically on a remote host). Their purpose is merely to notify the other application that something has happened, has been noticed, etc. The big problem with TRAPs is that they’re
unacknowledged so you don’t actually know if the remote application received your oh-so- important message to it. SNMPv2 PDUs fixed this by introducing the notion of an INFORM, which is nothing more than an acknowledged TRAP.
Q156. - (Topic 7)
Scenario:
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.
R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?
A. R1 ethernet0/1 is shutdown. Configure no shutdown command.
B. R1 ethernet0/1 configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25.
C. R2 ethernet0/1 and R3 ethernet0/0 are configured with a non-default OSPF hello
interval of 25; configure no ip ospf hello-interval 25.
D. Enable OSPF for R1 ethernet0/1; configure ip ospf 1 area 0 command under ethernet0/1.
Answer: B
Explanation:
Looking at the configuration of R1, we see that R1 is configured with a hello interval of 25 on interface Ethernet 0/1 while R2 is left with the default of 10 (not configured).
Q157. - (Topic 5)
An administrator must assign static IP addresses to the servers in a network. For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP properties box for the sales server?
A. IP address: 192.168.20.14
Subnet Mask: 255.255.255.248
Default Gateway: 192.168.20.9
B. IP address: 192.168.20.254
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.20.1
C. IP address: 192.168.20.30
Subnet Mask: 255.255.255.248
Default Gateway: 192.168.20.25
D. IP address: 192.168.20.30
Subnet Mask: 255.255.255.240
Default Gateway: 192.168.20.17
E. IP address: 192.168.20.30
Subnet Mask: 255.255.255.240
Default Gateway: 192.168.20.25
Answer: C
Explanation:
For the 192.168.20.24/29 network, the usable hosts are 192.168.24.25 (router) – 192.168.24.30 (used for the sales server).
Q158. - (Topic 8)
Which destination IP address can a host use to send one message to multiple devices across different subnets?
A. 172.20.1.0
B. 127.0.0.1
C. 192.168.0.119
D. 239.255.0.1
Answer: D
Explanation: Multicast is a networking protocol where one host can send a message to a special multicast IP address and one or more network devices can listen for and receive those messages.
Multicast works by taking advantage of the existing IPv4 networking infrastructure, and it does so in something of a weird fashion. As you read, keep in mind that things are a little
confusing because multicast was "shoe-horned" in to an existing technology.
For the rest of this article, let's use the multicast IP address of 239.255.0.1. We'll not worry about port numbers yet, but make a mental note that they are used in multicast. We'll discuss that later.
Q159. - (Topic 4)
Which PPP subprotocol negotiates authentication options?
A. NCP
B. ISDN
C. SLIP
D. LCP
E. DLCI
Answer: D
Explanation:
The PPP Link Control Protocol (LCP) is documented in RFC 1661. LPC negotiates link and PPP parameters to dynamically configure the data link layer of a PPP connection. Common LCP options include the PPP MRU, the authentication protocol, compression of PPP header fields, callback, and multilink options.
Q160. - (Topic 8)
How does a router handle an incoming packet whose destination network is missing from the routing table?
A. it discards the packet.
B. it broadcasts the packet to each network on the router.
C. it routes the packet to the default route.
D. it broadcasts the packet to each interface on the router.
Answer: A
