Cause all that matters here is passing the Cisco 200 125 cisco exam. Cause all that you need is a high score of ccna routing and switching 200 125 official cert guide library CCNA Cisco Certified Network Associate CCNA (v3.0) exam. The only one thing you need to do is downloading Exambible ccna 200 125 exam study guides now. We will not let you down with our money-back guarantee.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 200-125 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 200-125 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/200-125-exam-dumps.html
P.S. Practical 200-125 preparation exams are available on Google Drive, GET MORE: https://drive.google.com/open?id=1h4WwjNBP_fjjnxXJLxNgPsEiO-cPwGBa
New Cisco 200-125 Exam Dumps Collection (Question 6 - Question 15)
Q1. Which tow options describe benefits of aggregated chassis technology? (Choose two.)
A. It requires only three IP addresses per VLAN.
B. It reduces management overhead.
C. It requires only one IP address per VLAN.
D. It supports redundant configuration files.
E. It supports HSRP, VRRP, and GLBP.
F. Switches can be located anywhere regardless of their physical distance from one another.
Answer: B,C
Q2. Which command sets and automatically encrypts the privileged enable mode password?
A. Enable password c1sc0
B. Secret enable c1sc0
C. Password enable c1sc0
D. Enable secret c1sc0
Answer: D
Q3. Which statement about DTP is true?
A. It uses the native VLAN.
B. It negotiates a trunk link after VTP has been configured.
C. It uses desirable mode by default.
D. It sends data on VLAN 1.
Answer: D
Explanation:
Disabling Dynamic Trunking Protocol (DTP)
Cisco'sDynamicTrunking Protocolcan facilitate the automatic creation of trunks between two switches. When two connected ports are configured in dynamic mode, and at least one of the ports is configured as desirable, the two switches will negotiate the formation of a trunk across the link. DTP isn't to be confused withVLAN Trunking Protocol(VTP), although the VTP domain does come into play.
DTP on the wireis pretty simple, essentially only advertising the VTP domain, the status of the interface, and it's DTP type. These packets are transmitted in the native (or access) VLAN every 60 seconds both natively and with ISL encapsulation (tagged as VLAN 1) when DTP is enabled.
Q4. What is a difference between TACACS+ and RADIUS in AAA?
A. Only TACACS+ allows for separate authentication.
B. Only RADIUS encrypts the entire access-request packet.
C. Only RADIUS uses TCP.
D. Only TACACS+ couples authentication and authorization.
Answer: A
Explanation: Authentication and Authorization
RADIUS combines authentication and authorization. The access-accept packets sent by the RADIUS server to the client contain authorization information. This makes it difficult to decouple authentication and authorization.
TACACS+ uses the AAA architecture, which separates AAA. This allows separate authentication solutions that can still use TACACS+ for authorization and accounting. For example, with TACACS+, it is possible to use Kerberos authentication and TACACS+ authorization and accounting. After a NAS authenticates on a Kerberos server, it requests authorization information from a TACACS+ server without having to re-authenticate. The NAS informs the TACACS+ server that it has successfully authenticated on a Kerberos server, and the server then provides authorization information.
During a session, if additional authorization checking is needed, the access server checks with a TACACS+ server to determine if the user is granted permission to use a particular command. This provides greater control over the commands that can be executed on the access server while decoupling from the authentication mechanism.
Q5. Which two steps must you perform to enable router-on-a-stick on a switch? (Choose two.)
A. Configure an IP route to the VLAN destination network.
B. Connect the Router to a trunk port.
C. Configure full duplex.
D. Configure the subinterface number exactly the same as the matching VLAN.
E. Assign the access port to a VLAN.
Answer: B,C
Q6. Which two spanning-tree port states does RSTP combine to allow faster convergence? (Choose two.)
A. blocking
B. listening
C. learning
D. forwarding
E. discarding
Answer: A,B
Q7. Refer to the exhibit.
While troubleshooting a switch, you executed the show interface port-channel 1 etherchannel command and it returned this output. Which information is provided by the Load value?
A. the percentage of use of the link
B. the preference of the link
C. the session count of the link
D. the number source-destination pairs on the link
Answer: D
Q8. Which statement about unicast frame forwarding on a switch is true?
A. The TCAM table stores destination MAC addresses
B. If the destination MAC address is unknown, the frame is flooded to every port that is configured in the same VLAN except on the port that it was received on.
C. The CAM table is used to determine whether traffic is permitted or denied on a switch
D. The source address is used to determine the switch port to which a frame is forwarded
Answer: B
Q9. Which three statements about VTP features are true? (Choose three.)
A. VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
B. When properly configured, VTP minimizes VLAN misconfigurations and configuration inconsistencies.
C. When properly configured, VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
D. Each broadcast domain on a switch can have its own unique VTP domain.
E. VTP pruning is used to increase available bandwidth in trunk links.
F. To configure a switch to be part of two VTP domains, each domain must have its own passwords.
G. Client, server, and transparent are valid VTP modes.
Answer: B,E,G
Q10. When troubleshooting client DNS issues, which two tasks must you perform? (Choose two.)
A. Ping a public website IP address.
B. Determine whether a DHCP address has been assigned.
C. Determine whether the hardware address is correct.
D. Ping the DNS server.
E. Determine whether the name servers have been configured.
Answer: D,E
100% Down to date Cisco 200-125 Questions & Answers shared by Allfreedumps, Get HERE: https://www.allfreedumps.com/200-125-dumps.html (New 889 Q&As)
