It is more faster and easier to pass the by using . Immediate access to the and find the same core area with professionally verified answers, then PASS your exam with a high score now.
Online Cisco 300-370 free dumps demo Below:
NEW QUESTION 1
An engineer wants to run the Voice Audit tool in PI and wants to be able to verify: that clients will be capable of having static IPs whether or not Call Admission Control is enabled
Which two rules field descriptions must be checked in the report? (Choose two.)
- A. DHCP assignment
- B. CAC: max bandwidth
- C. ACM
- D. DTPC
- E. load-based CAC
Answer: AE
Explanation: /Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3- 2/reference/guide/
pi_ref.pdf
NEW QUESTION 2
An engineer is troubleshooting non-802.11 interference and observes the shown output. Which interference signature is the most harmful to Wi-Fi?
Refer to the exhibit.
- A. cordless phone
- B. microwave oven
- C. 2 4 GHz wideband jammer
- D. FHSS Bluetooth
- E. analog video camera
Answer: A
NEW QUESTION 3
Refer to the exhibit.
An engineer has determined that during a recent controller failure, some access points did not fail over to their secondary controller, which has sufficient licenses for all APs. The controllers are not in a mobility group, but have A records for their hostnames in DNS.
Using these high availability settings, which option is the most likely cause of this issue?
- A. The AP failover priority was not set high enough.
- B. The controllers must be in the same mobility.
- C. DNS hostnames are required to be FQDN.
- D. The secondary controller IP address is incorrec
Answer: A
NEW QUESTION 4
An engineer is creating a custom rogue classification rule directly on a controller. Which two conditions are possible when adding a custom rule to a controller? (Choose two.)
- A. internal
- B. ad hoc
- C. client-count
- D. duration
- E. WLAN
- F. open authentication
Answer: AD
NEW QUESTION 5
An engineer is deploying a wireless infrastructure and must use Layer 2 discovery for access point association. Which configuration meets this requirement?
- A. Configure the Access Points and WLC management interface on the same VLAN.
- B. Configure a DNS A RECORD to point to the controller.
- C. Configure option 43 on The APs DHCP scope.
- D. Configure the AP using a serial connection to indicate its controlle
Answer: A
NEW QUESTION 6
Refer to the exhibit.
A VoWLAN has been deployed at a customer site, and users report that audio is choppy in some areas. The exhibit captures a voice exchange between one phone that is associated to the AP at the end of the corridor (172.31.255.101) and another phone that is positioned in a conference room nearby. Which action enhances the voice application quality of experience?
- A. Change the basic rate configuration on the WLC to include 54 Mbps.
- B. Change the WLAN QoS profile to platinum.
- C. Decrease the AP power level.
- D. Disable higher data rates on the controlle
Answer: A
NEW QUESTION 7
You are troubleshooting an AP joining issue. You have captured the CAPWAP join request sent from the AP to the controller. Which information do you export?
- A. MAC address of the AP that issues the join request
- B. version of the controller
- C. AP broadcast domain
- D. name of the controller that issues the joining request
Answer: A
NEW QUESTION 8
Which feature should a network engineer enable within a mixed-client network to ensure that the legacy client operates at the best possible rates?
- A. ClientLink
- B. RRM
- C. DCA
- D. Band Select
Answer: A
Explanation: In mixed client environments, 802.11a/g clients may delay communications for 802.11n clients and reduce overall system performance. Organizations can improve the reliability and coverage for legacy 802.11a/g clients, assist these clients in operating at the best possible rates, and help ensure that
these legacy clients get on and off the wireless network faster by implementing Cisco ClientLink. Cisco ClientLink is easily enabled through the wireless LAN controller or Cisco Wireless Control System (WCS) control panel.
NEW QUESTION 9
DRAG DROP
Drag and drop the Layer 3 WLAN controller mutual authentication join process events on the left into the order in which they occur on the right Not all options are used.
Answer:
Explanation: 
NEW QUESTION 10
Clients are failing EAP authentication A debug shows that an EAP handshake started and the clients are then de-authenticated. Which two issues can cause this problem'? (Choose two.)
- A. The clients are configured for machine authentication, but the RADIUS server is configured for user authentication.
- B. The WLC has not been added to the RADIUS server as a client.
- C. The WLC certificate has changed.
- D. The shared secret of the WLC and RADIUS server do not match.
- E. The WLAN is not configured for the correct EAP supplicant typ
Answer: BE
NEW QUESTION 11
Which three components are needed to identify the zone of impact for non-802.11 sources of 2.4 GHz and 5.0 GHz interference? (Choose three.)
- A. WLC
- B. MSE
- C. RF site survey tool
- D. Wi-Fi analyzer
- E. CleanAir AP
- F. spectrum analyzer
Answer: CEF
NEW QUESTION 12
Refer to the exhibit.
A mobile station in a factory contains an AP configured as a work group bridge that authenticates to a root AP using EAP-FAST. To be able to use the mobile station in further parts of the factory, another root AP is installed and also configured for EAP-FAST. When the mobile station is attempting to roam to the other AP, it loses connection yet can still authenticate to the first one. What is the cause for
the failed authentication on RAP2?
- A. RAP1 is using a different authentication protocol than RAP2.
- B. RAP2 has a different SSID than RAP1.
- C. RAP1 is using a different encryption than RAP2.
- D. The authentication usemame and password is differen
Answer: A
NEW QUESTION 13
A recently acquired Cisco Aironet 1550 series AP is unable to join the WLC. This message is observed on the AP console:
AAA Authentication Failure for UserName:CC93.1981.0035 User Type: WLAN USER Which action must be taken for the AP to associate with the controller?
- A. Add MAC address CC93.1981.0035 to the Security AAA AP policy Authorization List.
- B. Authenticate the AP to the WLC from the console using an admin account on the WLC.
- C. Add MAC address CC93.1981.035 to the Security AAA MAC Filtering tab.
- D. Import the self-signed certificate of the AP to the Security:Certificate:LSC tab.
- E. Import the self-signed certificate of the AP to the Security:Certificate:SSC ta
Answer: A
NEW QUESTION 14
Refer to the exhibit.
An engineer is troubleshooting non-802.11 interference and observes this output. Which type of interference signatures can the engineer identify?
- A. microwave
- B. DECT phone
- C. Bluetooth
- D. jammer
Answer: A
NEW QUESTION 15
Which two EAP types are tunneled? (Choose two.)
- A. EAP-MD5
- B. EAP-MSCHAPv2
- C. PAP
- D. EAP-FAST
- E. EAP-MD6
Answer: BD
NEW QUESTION 16
An engineer uses the shutdown and no shutdown commands on a switch port that an access point is connected to because the AP had disassociated. These commands usually resolve the issue.
Which troubleshooting methodology does this demonstrate?
- A. bottom-up
- B. top-down
- C. divide and conquer
- D. shoot from the hip
Answer: D
P.S. Easily pass 300-370 Exam with 104 Q&As prep-labs.com Dumps & pdf Version, Welcome to Download the Newest prep-labs.com 300-370 Dumps: https://www.prep-labs.com/dumps/300-370/ (104 New Questions)
