Ideas to 400 wood road 201-g snowmass village co 81615

There is the interactive space in Actualtests. You can chat with examinees. Learn via each other and also make progress together. The actual candidates who have handed the Cisco 400-201 exam may pass on his or her wisdom to you. Help make full using their Cisco examination notes. These are an invaluable asset for your Cisco Cisco exam preparation. You will find essentially the most advanced, appropriate and guaranteed Cisco 400-201 exam questions and also answers. You will be ready to the Cisco 400-201 exam questions on the examination day. Learn more 400-201 knowledge and lay the solid foundation for advancements within Cisco Cisco 400-201 career.

2021 Sep cell block h 201-400:

Q101. Which information is carried in the OSPFv3 intra-area Prefix LSA? 

A. All link-local addresses 

B. All IPv6 prefix and topology information that OSPFv2 included in Router LSA and Network LSA 

C. List of options associated with the link to all other routers attached to the link 

D. All prefix-specific information that OSPFv2 included in Router LSA and Network LSA 

Answer: D 


OSPFv3's new LSA, the Intra-area Prefix LSA (type 9), handles intra-area network information that was previously included in OSPFv2 type 2 LSAs. It is used in order to advertise one or more IPv6 prefixes. The prefixes are associated with router segment, stub network segment or transit network segment. Intra-area prefix LSAs (type 9) & Inter-Area-Prefix-LSA (type 3) carry all IPv6 prefix information, which, in IPv4, is included in router LSAs and network LSAs. 


Refer to the exhibit. 

PE1 and PE2 has a Layer 2 VPN over a GRE tunnel. This GRE tunnel built between P1 and P2 has LDP enabled. Consider a packet capture of the packets from CE1 and CE2 at P1 and R1 link. Drag the headers on the left and drop them on the right in the order of the encapsulation, starting from the inner header (at the top) to the outer header (at the bottom). 


Q103. Which is the main characteristic of LTE architecture compared to other mobile architectures? 

A. Provides supports to deploy Layer 3 MPLS VPN model, where other mobile architectures do not support. 

B. Offers node redundancy with the static route configured on the IP NodeB using the HSRP/VRRP virtual ip address. 

C. Provides a simpler, less hierarchical model with the capability of simplistically distributing the core gateways. 

D. Introduces a hierarchical model with connection-oriented service requirements and one-to-one relationships. 

Answer: C 

Explanation:,+less+hierarchical+mo del+with+the+capability+of+simplistically+distributing+the+core+gateways.&source=bl&ots =Bwpk3CQ_jN&sig=2-kgrCA_7hEX3kuvSxWVV2AnAS0&hl=en&sa=X&ved=0CB0Q6AEwAGoVChMI_5La8tbCx wIVgZ6OCh1N7gHa#v=onepage&q=LTE%20Provides%20a%20simpler%2C%20less%20 hierarchical%20model%20with%20the%20capability%20of%20simplistically%20distributing %20the%20core%20gateways.&f=false 

Q104. BGP best route selection process is based on what? 

A. path attributes 

B. lowest cost 

C. highest bandwidth 

D. lowest delay 

E. lowest hop-count 

Answer: A 

Q105. A network engineer is designing the BGP architecture with a requirement of preventing the AS 65001 from becoming a Transit AS path, using the following configuration: 

router bgp 65000 

neighbor route-map BGP-ROUTE-POLICY in 

The goal is to prevent routes learned from from being advertised to any other eBGP peering in the AS 65000. What command should be used within the route map to achieve this goal while keeping existing route policies in place? 

A. set community no-export additive 

B. set community no-advertise 

C. set community no-advertise additive 

D. set community no-export 

Answer: C 



400-201 download

Latest ccie service provider exam code:

Q106. Which are the two purposes of the MPLS label value 1? (Choose two.) 

A. it is used for MPLS OAM packets. 

B. it indicates an implicit null label. 

C. it is used for VPNv6 packets. 

D. it is used to carry the QoS value in the label stack. 

E. it indicates an explicit null label. 

F. it indicates a router alert label. 

Answer: C,F 


IPv4 Explicit NULL Label ----> 0 

Router Alert Label ----> 1 

IPv6 Explicit NULL Label -----> 2 

Implicit NULL Label -----> 3 

OAM Alert Labe -----> 14 

Q107. Two switches are connected back-to-back using two Gigabit Ethernet interfaces. These two interfaces are assigned to a port channel in VLAN trunk mode. Which configuration sequence allows the addition of a new VLAN in this link? 

A. Add the VLAN to the port channel only, and remove it from the individual links. 

B. Add the VLAN to both the port channel and individual links. 

C. Add the VLW to the port channel only, and it will be reflected on the individual links. 

D. Add the VLAN to the individual links, and it will be reflected on the port channel. 

Answer: C 


Drag each resiliency mechanism on the left to its corresponding technology on the right. 


Q109. Users are complaining of intermittent high packet loss for seconds at a time. The engineer troubleshooting the issue finds that a TenGigE link is bouncing for milliseconds at a time, causing the traffic path to reconverge onto a congested FastEthernet link. What can the engineer do to prevent this service-affecting reconvergence only in the case of momentary link bounces until the link can be repaired? 

A. decrease the carrier-delay up on both sides of the link 

B. disable keepalives and BFD 

C. decrease the carrier-delay down on both sides of the link 

D. increase the carrier-delay up on both sides of the link 

E. increase the carrier-delay down on both sides of the link 

Answer: D 

Q110. Refer to the exhibit. Customer XYZ Site 1 is not learning prefixes from Site 2. What is the issue? 

A. MPLS LSP is broken along the path. 

B. The route-policy is not implemented in router PE-2. 

C. The BGP local-as command should be used between PE-1 and CE-1. 

D. The route-distinguisher values must match in both sites. 

E. The BGP as-override command should be implemented between PE-1 and CE-1. 

Answer: E 

see more 400-201 dumps