Tips for windows server 2012 certification

It is impossible to pass Microsoft 70-410 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Microsoft 70-410 practice questions. You will get a surprising result by our Refresh Installing and Configuring Windows Server 2012 practice guides.

2016 Jul microsoft official academic course 70-410 pdf:

Q121. HOTSPOT - (Topic 1) 

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 40 virtual machines that run Windows Server 2008 R2. The virtual machines connect to a private virtual switch. 

You have a file that you want to copy to all of the virtual machines. 

You need to identify to which servers you can copy files by using the Copy-VmFile cmdlet. 

What command should you run? To answer, select the appropriate options in the answer area. 



Answer: 



Q122. - (Topic 1) 

Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed. 

You connect a new print device to the network. The marketing department and the sales department will use the print device. 

You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users. 

What should you do on Server1? 

A. Add two printers. Modify the priorities of each printer and the security settings of each printer 

B. Add two printers and configure printer pooling 

C. Add one printer and configure printer pooling. 

D. Add one printer. Modify the printer priority and the security settings 

Answer: A 

Explanation: 

To set different print priority to different groups Open Printers and Faxes. Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics. Click the Advanced tab. In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups. 


Q123. - (Topic 3) 

Your network contains an Active Directory forest named contoso.com. The forest contains a child domain named europe.contoso.com. The europe.contoso.com child domain 

contains a server named Server1 that runs Windows Server 2012 R2. You install the DHCP Server server role on Server1. You have access to the administrative accounts shown in the following table. 


A. Admin1 

B. Admin2 

C. Admin3 

D. Admin4 

Answer: D 

Explanation: 

A. Local account can’t be used 

B. Authorization needs to happen in contoso.com and must be an Ent Admin 

C. Authorization needs to happen in contoso.com and must be an Ent Admin 

D. Correct domain and is a member of Ent Admin’s 


Q124. - (Topic 3) 

Your company’s security policy states that all of the servers deployed to a branch office must not have the graphical user interface (GUI) installed. In a branch office, a support technician installs a server with a GUI installation of Windows Server 2012 on a new server, and then configures the server as a DHCP server. 

You need to ensure that the new server meets the security policy. You want to achieve this goal by using the minimum amount of Administrative effort. 

What should you do? 

A. Reinstall Windows Server 2012 on the server. 

B. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience. 

C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE. 

D. From Server Manager, uninstall the User Interfaces and Infrastructure feature. 

Answer: D 


Q125. DRAG DROP - (Topic 3) 

You have a Hyper-V host named Server1. A technician creates a virtual machine named 

VM1 on Server1 by using the New Virtual Machine Wizard. 

You start VM1 and you discover that there is no option to start by using PXE. 

You need to ensure that you can start VM1 by using PXE. 

Which three actions should you perform in sequence? (To answer, move the appropriate 

three actions from the list of actions to the answer area and arrange them in the correct 

order.) 


Answer: 



Q126. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed. 

Contoso.com has a server, named ENSUREPASS-SR07, which has four network adapters. Contoso.com has two SR07’s network adapters are connected to the one LAN, local area networks (LANs). Two of ENSUREPASS – while the other two are connected to the other LAN. 

You are required to configure one of the network adapter pairs into a network adapter team. 

Which of the following actions should you take? 

A. You should consider accessing the Group Policy Management Console (GPMC) on ENSUREPASS-SR07. 

B. You should consider accessing the TS Manager console on ENSUREPASS-SR07. 

C. You should consider accessing the Server Manager console on ENSUREPASS-SR07. 

D. You should consider accessing the Remote Desktop Gateway Manager console on ENSUREPASS-SR07. 

Answer: C 


Q127. HOTSPOT - (Topic 2) 

You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter. 

From Windows PowerShell, you run the following command: 

Remove-WindowsFeature ServerGui-Shell. 

In the table below, identify which tools are available on Server1 and which tools are 

unavailable on Server1. 

Make only one selection in each row. Each correct selection is worth one point. 


Answer: 



70-410 free question

Abreast of the times 70-410 installing and configuring windows server 2012 r2:

Q128. HOTSPOT - (Topic 1) 

You have a Hyper-V host named Hyperv1 that runs Windows Server 2012 R2. Hyperv1 hosts a virtual machine named Server1. Server1 uses a disk named Server1.vhdx that is stored locally on Hyperv1. 

You stop Server1, and then you move Server1.vhdx to an iSCSI target that is located on another server. 

You need to configure Server1 to meet the following requirements: 

. Ensure that Server1 can start by using Server1.vhdx. 

. Prevent Server1.vhdx from consuming more than 500 IOPS on the iSCSI target. 

Which two objects should you configure? 

To answer, select the appropriate two objects in the answer area. 


Answer: 



Q129. - (Topic 1) 

You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.VM1 has a legacy network adapter. 

You need to assign a specific amount of available network bandwidth to VM1. 

What should you do first? 

A. Remove the legacy network adapter, and then run the Set-VMNetworkAdapter cmdlet. 

B. Add a second legacy network adapter, and then run the Set-VMNetworkAdopter cmdlet 

C. Add a second legacy network adapter, and then configure network adapter teaming. 

D. Remove the legacy network adapter, and then add a network adapter 

Answer: D 

Explanation: 

A. Set-VMNetworkAdaptercmdlet configures features of the virtual network adapter in a virtual machine or the management operating system 

B. The legacy network adapter doesn’t support bandwidth management 

C. The legacy network adapter doesn’t support bandwidth management 

D. Add a New network adapter The legacy network adapter doesn’t support bandwidth management 


Q130. HOTSPOT - (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. 

You need to implement NIC teaming on Server1. 

Which two network connections should you include on the NIC team? (To answer, select the two appropriate network connections in the answer area.) 


Answer: 



Q131. - (Topic 2) 

Your network contains an Active Directory domain named contoso.com. 

You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain. 

You need to ensure that you can view processor usage and memory usage information in Server Manager. 

What should you do? 

A. From Server Manager, click Configure Performance Alerts. 

B. From Performance Monitor, create a Data Collector Set (DCS). 

C. From Performance Monitor, start the System Performance Data Collector Set (DCS). 

D. From Server Manager, click Start Performance Counters. 

Answer: D 

Explanation: 

You should navigate to the Server Manager snap-in and there click on All Servers, and then Performance Counters. The Performance Counters, when started can be set to collect and display data regarding processor usage, memory usage, amongst many other resources like disk-related and security related data, that can be monitored. 

: http://technet.microsoft.com/en-us/library/bb734903.aspx 


Q132. HOTSPOT - (Topic 1) 

Your network contains an Active Directory domain named adatum.com. 

You create an account for a temporary employee named User1. 

You need to ensure that User1 can log on to the domain only between 08:00 and 18:00 

from a client computer named Computer1. 

From which tab should you perform the configuration? 

To answer, select the appropriate tab in the answer area. 


Answer: 



Q133. - (Topic 3) 

Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2. 

You install the Network Load Balancing feature on VM1 and VM2. 

You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB). 

Which virtual machine settings should you configure on VM1 and VM2? 

A. DHCP guard 

B. MAC address 

C. Router guard 

D. Port mirroring 

Answer: B 

Explanation: 

When MAC addresses are not assigned to virtual machines, it could cause network problems. 

References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V virtualization, Lesson 1: Deploying and configuring Hyper-V hosts, p. 313-319 http://blogs.msdn.com/b/clustering/archive/2010/07/01/10033544.aspx 


Q134. - (Topic 3) 

Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2. The IP configuration of each office is configured as shown in the following table. 


You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets. 

Which command should you run? 

A. route.exe add -p 192.168.0.0 mask 255.255.248.0 172.31.255.254 

B. route.exe add -p 192.168.12.0 mask 255.255.252.0 172.31.255.254 

C. route.exe add -p 192.168.8.0 mask 255.255.252.0 172.31.255.254 

D. route.exe add -p 192.168.12.0 mask 255.255.255.0 172.31.255.254 

Answer: B 


Q135. - (Topic 2) 

Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2. 

On DC2, you open Server Manager and you add Server1 as another server to manage. 

From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit button.) 


You need to ensure that when you right-click Server1, you see the option to run the DHCP console. 

What should you do? 

A. In the domain, add DC2 to the DHCP Administrators group. 

B. On Server1, install the Feature Administration Tools 

C. On DC2 and Server1, run winrmquickconfig. 

D. On DC2, install the Role Administration Tools. 

Answer: D 

Reference: http://technet.microsoft.com/en-us/library/ee441255(v=ws.10).aspx 



see more 70-410 dumps