Top Juniper JN0-692 item pool Choices

Cause all that matters here is passing the Juniper JN0-692 exam. Cause all that you need is a high score of JN0-692 Service Provider Routing and Switching Support, Professional exam. The only one thing you need to do is downloading Actualtests JN0-692 exam study guides now. We will not let you down with our money-back guarantee.

2016 Dec JN0-692 practice test

Q51. Click the Exhibit button. 

Customer A is complaining that routes advertised from the CE2 router are not being received on the CE1 router. The physical topology of the network is CE1-PE1-PE2- CE2. The CE1-PE1 subnet is 172.16.1.0/24. The CE2-PE2 subnet is 172.16.2.0/24. 

PE1's loopback is 192.168.3.1 and PE2's loopback is 192.168.4.1.Referring to the output in the exhibit, what is the problem? 

A. No LSP exists between PE1 and PE2. 

B. Route targets are not properly configured. 

C. as-override is not configured in the VRFs. 

D. family inet-vpn is not configured on the PEs. 

Answer:


Q52. Click the Exhibit button. 

The exhibit contains a BGP topology. R1 and R2 are peering using IBGP. R2 and R3 are peering with EBGP. R1 is not installing any routes from R3 due to next-hop resolution issues. Which two configurations will resolve this issue? (Choose two.) 

A. Use a policy to advertise the loopback on R2 into the IGP. 

B. Advertise the R2-R3 subnet into the IGP. 

C. Configure advertise-inactive on the IBGP peering session on R2. 

D. Configure next-hop self on the IBGP peering session on R2. 

Answer: B, D 


Q53. Two of your customers have just merged into a single company. Because of time constraints, you have been asked to connect Customer A's BGP-signaled Layer 2 VPN with Customer B's LDP- signaled Layer 2 circuit using the interworking interface. Which two statements are true? (Choose two). 

A. You must have a tunnel PIC to create the interworking interface. 

B. You must configure the Layer 2 interworking protocol. 

C. The logical interworking interfaces must specify their logical peer units. 

D. The Junos OS automatically links the interworking interface units. 

Answer: B, C 


Q54. The 10.200/16 network is announced as an IS-IS route by R2 to its IS-IS neighbors. R3 and R4 are configured with an IS-IS export policy, which announces this route to R5 and R6. Which statement is true? 

A. When viewed on R5 the 10.200/16 route will be marked down. 

B. When viewed on R5 the 10.200/16 route will be marked up. 

C. The 10.200/16 route will not be visible on R5. 

D. The 10.200/16 route will be marked with the overload bit. 

Answer:


Q55. Which two configuration parameters are required to configure a BGP-signaled VPLS service? (Choose two.) 

A. vpls-id 

B. site-identifier 

C. route-distinguisher 

D. site-address 

Answer: B, C 


Refresh JN0-692 practice test:

Q56. You have applied a customized EXP rewrite rule on router R1 on the egress of the interface connecting to router R2. You want to verify if it is working properly. Which two methods would you use to accomplish this task? (Choose two.) 

A. Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets for the new EXP values with a firewall filter as they leave R2. 

B. Use the traceroute utility. 

C. Use an output filter on R1 that matches and counts on various EXP values on packets going to R2. 

D. Use an input firewall filter on R2 that matches and counts on various EXP values on packets coming from R1. 

Answer: C, D 


Q57. Click the Exhibit button. 

You are asked to configure an OSPF network based on the topology shown in the exhibit. Area 1 must not receive Type 5 LSAs from the backbone, but must be capable of containing ASBRs. What will accomplish this? 

A. Area 1 should be configured as a stub area, which by default meets the network's requirements. 

B. R3 should be configured with no-externals for Area 1, which will suppress Type 5 announcements. 

C. R3 should be configured with no-summaries for Area 1, which will suppress Type 5 announcements. 

D. Area 1 should be configured as an NSSA, which by default meets the network's requirements. 

Answer:


Q58. Referring to the exhibit, which two statements are true? (Choose two.) 

A. The VPN uses LDP signaling for VPLS services. 

B. The VPN uses BGP signaling for VPLS services. 

C. The PE and directly attached CE are multihomed. 

D. There are only 2 PEs with VPN membership in the network. 

Answer: A, D 


Q59. In the exhibit, the RIP network 192.168.0.0/24 is redistributed into OSPF on R8 Which two statements are true? (Choose two.) 

A. R4 receives the RIP network in a Type 7 LSA from R8. 

B. R7 receives the RIP network in a Type 5 LSA from R4. 

C. R2 receives the RIP network in a Type 7 LSA from R4. 

D. R3 receives the RIP network in a Type 5 LSA from R4. 

Answer: A, D 


Q60. Click the Exhibit button. 

A network administrator has configured the LSPs shown in the exhibit on the ingress router of a 10-Gigabit Ethernet network Which statement is true? 

A. Both LSPs will establish and remain established. 

B. The Boston-to-Denver LSP will establish and remain established. 

C. The Boston-to-Seattle LSP will establish and remain established. 

D. Neither LSP will remain established. 

Answer:



see more JN0-692 dumps