Jan 2021 updated: Pass4sure Juniper JN0-692 actual exam 41-50

The Juniper JN0-692 exam may be the first along with necessary exam to obtain the Juniper certification; Candidates had better take the Juniper Juniper practice program for the preparation of the exam. This exam detects your knowledge along with skills which whether or not youre qualified in putting in, operating, along with troubleshooting a small branch workplace network. This Juniper JN0-692 exam dumps include multiple choice, drag and decline, build list along with reorder, and simulation style questions. The check can be adaptive along with simulated questions might be asked.

2021 Jan JN0-692 practice

Q41. You recently added your autonomous system to an existing BGP confederation. You notice that a route that had a local preference of 100 now has a local preference of 50. 

Which statement explains the change? 

A. BGP path attributes such as next hop, local preference, and MED are normally restricted to a single AS but are allowed to propagate throughout the confederation's AS members. 

B. The confederation has sub-ASs that require all IBGP routes to have a local preference of 50 or below. 

C. When your Junos devices joined the confederation, they lost IBGP connectivity to the route in question; the local preference reverted to 50 once the BGP peering established. 

D. The route is being shared through an EBGP peer, and the confederation is propagating the local preference from the peer. 


Q42. Click the Exhibit button. 

You work for ISP A. Customers of both ISP B and ISP C must be able to reach all of your customers, but your network must not allow transit traffic between ISP B and ISP C. 

Referring to the exhibit, which two methods could you use? (Choose two.) 

A. Use local preference to prefer the proper routes. 

B. Use the well-known no-transit community. 

C. Use policy to filter routes on AS number. 

D. Use communities to identify and filter routes. 

Answer: C, D 

Q43. Click the Exhibit button. 

R3 and R4 want to establish an EBGP  session  between each other's  loopback addresses. They have each configured static routes to the other's loopback address and can ping from loopback to loopback. Their EBGP session is configured with correct neighbor and local addresses. The correct AS numbers have been specified at the [routing-options] hierarchy as well. Considering the topology in the exhibit, which statement is true? 

A. BGP's protocol preference must be adjusted to be lower than protocol static for the session to establish. 

B. Each side must configure multipath for the session to establish. 

C. Each peer must specify a local-as within their EBGP configuration for the session to establish. 

D. Each peer must configure multihop for the session to establish. 


Q44. CE1, CE2, and CE3 are part of a single VPLS VPN. R1, R2, and R3 are PEs in the provider network, and have just been powered on. The VPLS domain has converged, and frames have passed between all CEs in the last minute. An Ethernet frame has just arrived at R3 from CE3. It has a source MAC address of CE3 and a destination MAC address of CE1.What does R3 do with the Ethernet frame? 

A. Drops the packet as the destination MAC address is not for R3. 

B. Drops the packet as the destination MAC address is not in R3's MAC table. 

C. Forwards the packet to R1 only. 

D. Forwards the packet to R1 and R2. 


Q45. On the network shown in the exhibit, a network administrator is attempting to bring up an LSP between Boston and Seattle using administrative groups. Which two of the following LSP configurations allow the LSP to establish? (Choose two.) 

A. Option A 

B. Option B 

C. Option C 

D. Option D 

Answer: C, D 

Updated JN0-692 free exam questions:

Q46. Which configuration excerpt will advertise all local IPv4 and IPv6 destinations to the network? 

A. Option A 

B. Option B 

C. Option C 

D. Option D 


Q47. Which statement is true about IS-IS? 

A. IS-IS level 1 internal routes are announced to level 2 by default. 

B. All IS-IS level 1 routes are announced to level 2 by default. 

C. IS-IS level 2 internal routes are announced to level 1 by default. 

D. IS-IS does not share routes between level 1 and level 2 by default. 


Q48. Click the Exhibit button. 

A route is advertised from AS 65221 to AS 65432 using EBGP. The route is active and reachable on R3, but does not appear as an active route on R1 and R2. R3 has an export policy applied to its IBGP group matching on routes from R4, but does not have a then criteria specified. Which policy action should router R3 configure to make this route visible on routers R1 and R2? 

A. then next-hop self 

B. then accept 

C. then announce 

D. then resolve-recursive 


Q49. Click the Exhibit button. 

The output in the exhibit was captured on an interface. Which three statements are true about the configuration on the router with hostname SaoPaulo? (Choose three.) 

A. Wide metrics is not in use. 

B. The router has the overload bit set to "on". 

C. Authentication is enabled. 

D. System ID is 1921.6805.2001. 

E. Level 2 routing is enabled. 

Answer: A, C, E 

Q50. What does the Junos command advertise-inactive allow? 

A. OSPF inactive routes to be advertised using BGP 

B. inactive and hidden BGP routes to be redistributed into OSPF 

C. the best BGP route to be re-advertised by BGP, even when it is not the best route 

D. the second-best BGP route to be re-advertised by BGP, to back up the best BGP route 


see more JN0-692 dumps