Our pass rate is high to 98.9% and the similarity percentage between our NS0-520 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Network-Appliance NS0-520 exam in just one try? I am currently studying for the Network-Appliance NS0-520 exam. Latest Network-Appliance NS0-520 Test exam practice questions and answers, Try Network-Appliance NS0-520 Brain Dumps First.
Free NS0-520 Demo Online For Network-Appliance Certifitcation:
NEW QUESTION 1
While changing the network connections on your ONTAP cluster from twinax to fiber, the ports experience network connectivity issues. You want to verify which speeds the ports support and ensure that you
have supported transceivers. In this scenario which two actions would accomplish this task (choose two)
- A. Use hardware universe to determine the supported transceivers
- B. Use the interoperability matrix tool to determine the supported port speeds
- C. Use hardware universe to determine the supported port speeds
- D. Use the interoperability matrix tool to determine the supported transceivers
Answer: AC
Explanation:
Hardware universe will show information about port speeds and transceiver compatbility You can find more information on this link: https://hwu.netapp.com/Resources/hwu_ug.pdf (page 73)
NEW QUESTION 2
An administrator wants to implement FCoE for connectivity of an AFF A200 using VLAN 3011 for fabric traffic across VSAN 11. When configuring the Nexus switches for FCoE connectivity, which two actions are required? (Choose two.)
- A. Create a new virtual FC interface and bind the physical interface to it.
- B. Add the virtual interface to the VSAN.
- C. Create a port channel and add all of the physical network ports that will have FCoE LIFs.
- D. Add the adapter MAC address to the network port configuration where the node is connected.
Answer: BC
NEW QUESTION 3
Exhibit.
Referring to the exhibit, which type of zoning should be used?
- A. a WWPN with a single initiator and multiple targets
- B. a WWPN with a single initiator and a single target
- C. a WWNN with a single initiator and multiple targets
- D. a WWNN with a single Initiator and a single target
Answer: B
NEW QUESTION 4
You will be purchasing two high availability NetApp AFF A700s systems. You want to set up a 4-node cluster. Which switch would you use for the cluster interconnect switches?
- A. NetApp CN1610
- B. Cisco Nexus 3132Q-V
- C. Cisco Nexus 5548UP
- D. Cisco Nexus 5020
Answer: B
NEW QUESTION 5
An administrator has a new AFF A220 system with two DS224C disk shelves and wants to validate if the shelf cabling is correct.
Which resource would be used to accomplish this task?
- A. Config Advisor
- B. OnCommand Unified Manager (OCUM)
- C. OneCollect
- D. Interoperability Matrix Tool (IMT)
Answer: A
NEW QUESTION 6
A customer has an existing 8-node cluster that consists of six FAS2650 nodes and two FAS2554 nodes. The customer wants to expand the cluster by adding two AFF A220 nodes.
Which resource would be used to determine whether this configuration is supported?
- A. Interoperability Matrix Tool (IMT)
- B. Config Advisor
- C. OneCollect
- D. Hardware Universe (HWU)
Answer: B
NEW QUESTION 7
You are configuring a Windows Server 2019 system to attach to an ISCSI presented LUN. There are multiple physical paths from the Windows Server to the Netapp Cluster. Which two changes are required
to the Windows Server to enable multipath? (choose two)
- A. Add an Ethernet network adapter
- B. Select the “enable multi-path” checkbox on the ISCSI software initiator
- C. Add a converged network adapter (CNA)
- D. Enable MPIO by selecting the option in the MPIO properties administrative application
Answer: BD
Explanation:
Select Enable multi-path, select Automatically restore this connection when the computer starts or Add this connection to the list of Favorite Targets, and then click Advanced
You can find more information on this link:
https://docs.netapp.com/ontap-9/topic/com.netapp.doc.exp-iscsi-cpg/iSCSI%20express%20configuration%20for (15)
NEW QUESTION 8
Which NetApp tool views automated, schedule configuration, and performance data for a customer's SAN from a Web browser?
- A. Virtual Storage Console
- B. OnCommand Workflow Analyzer
- C. Config Advisor
- D. Active 1Q
Answer: B
NEW QUESTION 9
Click the Exhibit button.
You have a 2-node cluster in a single-fabric SAN. Host 1 and Host 2 are part of a VMware cluster and access the same LUNs that reside in your NetApp storage.
Referring to the exhibit, what would be a way to test whether the multipathing is properly configured in your environment?
- A. Verify whether all destination storage target ports are contained in the same zone as Host 1.
- B. Administratively set ports 0a and 0c on Controller 1 to the offline setting.
- C. Power off the SAN switch.
- D. Disconnect Host 1 port and verify whether Host 2 is still able to run the VMs.
Answer: B
NEW QUESTION 10
An administrator has an AFF A200 cluster at their primary site that is used for FC connectivity to servers. For disaster recovery purposes they want to start replicating their data to another AFF A3Q0 cluster In a secondary location. The AFF A300 is In a site that has no FC or FCoE capable switches, and is currently only used for CIFS data. A cluster peering relationship already exists between the two clusters.
Which three additional actions are needed for the data to be ready for access from hosts at the secondary site? (Choose three.)
- A. Create zones with the appropriate initiators and targets for the secondary site.
- B. Enable the iSCSI service on the SVM at the secondary site.
- C. Replicate the data from the primary site to the secondary site with SnapMirror.
- D. Create new iSCSI igroups for LUN mapping.
- E. Enable the iSCSI service on the SVM at the primary site.
Answer: BCD
NEW QUESTION 11
A4-node ONTAP FAS9000 cluster was used to serve I/O from six RedHat 7.3 servers. The servers were configured with maximum, queue depth.
For production purposes, an additional 60 similarly configured hosts were added to the environment. Later, the hosts started reporting random QFull errors, and the aggregated performance degraded.
Which two solutions would alleviate the QFull errors and performance problems? (Choose two.)
- A. Remove Selective LUN Mapping (SIM) from the 4-node FAS9000 cluster.
- B. Download the latest FC HBA driver, firmware, and BIOS, and deploy them on the hosts.
- C. Configure and use additional FC target HBAs in the FAS9000 cluster.
- D. Reduce FC HBA gueue depth on the hosts.
Answer: CD
NEW QUESTION 12
Exhibit.
A Linux host cannot discover a newly provisioned LUN. Referring to the exhibit, what would be the cause of the problem?
- A. The IUN ID Is Incorrect.
- B. The host's MPIO feature is not enabled.
- C. The Initiator group is misconfigured.
- D. The host's IP address is misconfigured.
Answer: C
NEW QUESTION 13
After the addition of extra DS224C disk shelves, you notice that the output of the system node run -node node_1 sysconfig command shows Mixed-path. You need to investigate why the additional shelves are providing this error.
In this scenario, which two tools would help diagnose this issue? (Choose two.)
- A. Config Advisor
- B. Active IQ
- C. Hardware Universe (HWU)
- D. Interoperability Matrix Tool (IMT)
Answer: AD
NEW QUESTION 14
Exhibit.
Referring to the exhibit. What are two viable scenarios to test LUN multipathing on Host 1? (Choose two.)
- A. Reboot one of the switches.
- B. Disable one of the FC LIFs on Controller 1.
- C. Disconnect one of the host cables.
- D. Reboot Host 1.
Answer: AC
NEW QUESTION 15
A customer needs to change ports 0e and 0f on AFF_1 to support FC.
Referring to the exhibit, which three steps are required to accomplish this task? (Choose three.)
- A. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type target command.
- B. Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type initiator command.
- C. Restart the FC service.
- D. Take ports 0e and 0f offline.
- E. Reboot the node.
Answer: BCD
NEW QUESTION 16
An administrator has a 2node AFF ONTAP cluster named cl1. A Windows 2016 server has 10 FC LUNs mapped from the cluster , and the administrator can multiple paths to each LUN, During a scheduled storage failover, node cl1-02 took over cl1-01, and Windows server lost connectivity to all mapped LUNs but reestablished connectivity after the giveback operation finished.
In the scenario, what would cause the LUN connectivity outage?
- A. Multipathing software is not installed on the host.
- B. Switch zoning does not exist between the host initiator ports and the data LIFs that reside no node cl-01.
- C. NPIV is not enabled on the switches.
- D. Switch zoning does not exist between the host initiator ports and the data LIFs that reside on node cl1-02.
Answer: A
NEW QUESTION 17
Exhibit.
You are asked to change the iSCSl Target Node Name of an SVM named SVM1 that is serving data. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Reconnect all the lUNs alter renaming the target node.
- B. Disable Selective LUN Mapping (SIM) and create port sets.
- C. Unmap and re-map the LUNs.
- D. Stop and start the iSCSI service.
Answer: CD
NEW QUESTION 18
An enterprise customer has both a NetApp FAS8200 4-node cluster and a third-party storage array in a shared SAN environment. The host servers connect to both storage vendors' arrays in the fabric.
Regarding (he hosts in this scenario, what are- two NetApp best practices when performing this task? (Choose two.)
- A. Set the default timeout values and storage parameters for the host system.
- B. Provide isolation between storage systems using NetApp's multitenancy feature.
- C. Always use the same adapter for heterogeneous storage systems.
- D. Use separate adapters to connect to each vendors' storage system.
Answer: AD
NEW QUESTION 19
......
P.S. Easily pass NS0-520 Exam with 234 Q&As Dumps-hub.com Dumps & pdf Version, Welcome to Download the Newest Dumps-hub.com NS0-520 Dumps: https://www.dumps-hub.com/NS0-520-dumps.html (234 New Questions)
