An Expert interview about icnd2 questions

We are the most effective within introducing probably the most helpful 200-101 tools for your clients that may undoubtedly make these people succeed in the true Cisco 200-101 examination. A great Cisco guide has a marvelous and finest basic material which conditions a person totally and offers the assurance from the success which is not just a little factor. Merely download the actual Ucertify 200-101 Interconnecting Cisco Networking Devices Part 2 (ICND2) free of charge demo characteristics to determine the options as well as degree of Ucertify goods. You will be inspired in the 200-101 research guide pdf file defiantly. In the event you title the 100% victory, making use of Ucertify 200-101 to your Interconnecting Cisco Networking Devices Part 2 (ICND2) certified preparation is the greatest option.

2016 Oct numbers 101-200:

Q11. Refer to the exhibit. 


RTA is configured with a basic configuration. The link between the two routers is operational and no routing protocols are configured on either router. The line shown in the exhibit is then added to router RTA. Should interface Fa0/0 on router RTB shut down, what effect will the shutdown have on router RTA? 

A. A route to 172.16.14.0/24 will remain in the RTA routing table. 

B. A packet to host 172.16.14.225 will be dropped by router RTA. 

C. Router RTA will send an ICMP packet to attempt to verify the route. 

D. Because router RTB will send a poison reverse packet to router RTA, RTA will remove the route. 

Answer: A 


Q12. Refer to the exhibit. 


A network associate has configured OSPF with the command: 

City(config-router)# network 192.168.12.64 0.0.0.63 area 0 

After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? (Choose three.) 

A. FastEthernet0 /0 

B. FastEthernet0 /1 

C. Serial0/0 

D. Serial0/1.102 

E. Serial0/1.103 

F. Serial0/1.104 

Answer: BCD 


Q13. What does the frame-relay interface-dlci command configure? 

A. local DLCI on the subinterface 

B. remote DLCI on the main interface 

C. remote DCLI on the subinterface 

D. local DLCI on the main interface 

Answer: A 


Q14. Refer to the exhibit. 


Assume that all router interfaces are operational and correctly configured. In addition, assume that OSPF has been correctly configured on router R2. How will the default route configured on R1 affect the operation of R2? 

A. Any packet destined for a network that is not directly connected to router R1 will be dropped. 

B. Any packet destined for a network that is not directly connected to router R2 will be dropped immediately. 

C. Any packet destined for a network that is not directly connected to router R2 will be dropped immediately because of the lack of a gateway on R1. 

D. The networks directly connected to router R2 will not be able to communicate with the 172.16.100.0, 172.16.100.128, and 172.16.100.64 subnetworks. 

E. Any packet destined for a network that is not referenced in the routing table of router R2 will be directed to R1. R1 will then send that packet back to R2 and a routing loop will occur. 

Answer: E 


Q15. Refer to the exhibit. 


The Lakeside Company has the internetwork in the exhibit. The administrator would like to reduce the size of the routing table on the Central router. Which partial routing table entry in the Central router represents a route summary that represents the LANs in Phoenix but no additional subnets? 

A. 10.0.0.0/22 is subnetted, 1 subnets D 10.0.0.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1 

B. 10.0.0.0/28 is subnetted, 1 subnets D 10.2.0.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1 

C. 10.0.0.0/30 is subnetted, 1 subnets D 10.2.2.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1 

D. 10.0.0.0/22 is subnetted, 1 subnets D 10.4.0.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1 

E. 10.0.0.0/28 is subnetted, 1 subnets D 10.4.4.0 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1 

F. 10.0.0.0/30 is subnetted, 1 subnets D 10.4.4.4 [90/20514560] via 10.2.0.2, 6w0d, Serial0/1 

Answer: D 


200-101 exam question

Leading ccna icnd2 pdf:

Q16. Refer to the exhibit. 


A technician has configured the FastEthernet 0/1 interface on Sw11 as an access link in VLAN 1. Based on the output from the show vlan brief command issued on Sw12, what will be the result of making this change on Sw11? 

A. Only the hosts in VLAN 1 on the two switches will be able to communicate with each other. 

B. The hosts in all VLANs on the two switches will be able to communicate with each other. 

C. Only the hosts in VLAN 10 and VLAN 15 on the two switches will be able to communicate with each other. 

D. Hosts will not be able to communicate between the two switches. 

Answer: D 


Q17. What are two drawbacks of implementing a link-state routing protocol? (Choose two.) 

A. the sequencing and acknowledgment of link-state packets 

B. the requirement for a hierarchical IP addressing scheme for optimal functionality 

C. the high volume of link-state advertisements in a converged network 

D. the high demand on router resources to run the link-state routing algorithm 

E. the large size of the topology table listing all advertised routes in the converged network 

Answer: BD 


Q18. Which two statistics appear in show frame-relay map output? (Choose two.) 

A. the number of BECN packets that are received by the router 

B. the value of the local DLCI 

C. the number of FECN packets that are received by the router 

D. the status of the PVC that is configured on the router 

E. the IP address of the local router 

Answer: BD 


Q19. What occurs on a Frame Relay network when the CIR is exceeded? 

A. All TCP traffic is marked discard eligible. 

B. All UDP traffic is marked discard eligible and a BECN is sent. 

C. All TCP traffic is marked discard eligible and a BECN is sent. 

D. All traffic exceeding the CIR is marked discard eligible. 

Answer: D 


Q20. Which parameter or parameters are used to calculate OSPF cost in Cisco routers? 

A. Bandwidth 

B. Bandwidth and Delay 

C. Bandwidth, Delay, and MTU 

D. Bandwidth, MTU, Reliability, Delay, and Load 

Answer: A 



see more 200-101 dumps