Foolproof 70-341 prep tips

Youll get the actual in depth reason once you encounter difficulties on your 70-341 examine. Pass4sure supply you the actual 70-341 Core Solutions of Microsoft Exchange Server 2013 key points legibly within the 70-341 dumps. All these are greatly preserving your expenditures to get familiar with the actual Microsoft training courses.

2016 Jul vce 70-341:

Q65. You have an Exchange Server 2010 organization. 

You deploy several Exchange Server 2013 servers to the organization and you deploy the required certificates. 

You attempt to connect to an Exchange Server 2013 server by using Outlook Web App and you discover the error message shown in the exhibit (Click the Exhibit button.) 

Exhibit: * Missing* 

You need to prevent the error message from appearing when users access Outlook Web App on the new servers. 

What should you do? 

A. Remove the Exchange Server 2010 servers from the organization. 

B. Run the Remove-ExchangeCertificate cmdlet. 

C. From the Exchange Management Console, remove the certificates from the Exchange Server 2010 servers. 

D. From the Exchange Admin Center, modify the properties of the OWA virtual directory. 

Answer: B 


Q66. You are evaluating the deployment of the additional Exchange Server 2013 servers. 

You need to recommend changes to the transport configurations to ensure that all email 

messages sent from the Detroit office are routed through EX2. 

What should you include in the recommendation? 

A. Increase the cost of the CHI-NY site link to 15. 

B. Specify an Exchange-specific cost of 20 for the CHI-DET site link. 

C. Decrease the cost of the CHI-NY and the DET-NY site links to 4. 

D. Increase the cost of the DET-NY site link to 15. 

Answer: B 


Q67. HOTSPOT 

You have an Exchange Server 2013 organization that contains a server named EX1. 

The network contains two domain controllers named DC1 and DC2. 

You plan to make changes to the Active Directory infrastructure and to remove DC2 from 

the network. 

You need to verify whether EX1 writes Active Directory changes to DC2. 

What command should you run? To answer, select the appropriate options in the answer 

area. 


Answer: 



Q68. You need to recommend a solution for the New York office that meets the technical requirements for client access. 

What should you include in the recommendation? (Each correct answer presents a complete solution. Choose all that apply.) 

A. DNS round robin 

B. a Layer 4 hardware load balancer 

C. a Layer 7 hardware load balancer 

D. the Network Load Balancing (NLB) feature 

E. a Client Access server array 

Answer: C,E 


Q69. Your company named Contoso, Ltd., has an Exchange Server 2013 organization named contoso.com. 

The network contains an Active Directory domain. The domain contains an organizational unit (OU) named SalesOU. SalesOU contains two users named User1 and User2. 

Contoso purchases a domain name adatum.com. 

You need to change the primary SMTP address of all the users in SalesOU to use the SMTP suffix of adatum.com. The solution must not remove the contoso.com email address. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Create a new email address policy and apply the policy to the users in SalesOU. 

B. Change the default email address policy to include adatum.com. 

C. Create a new remote domain for adatum.com. 

D. Create a new accepted domain for adatum.com and set the domain type to Authoritative Domain. 

E. Create a new accepted domain for adatum.com and set the domain type to External RelayDomain. 

Answer: A,D 


Q70. HOTSPOT 

You have an Exchange Server 2013 organization that contains three moderated distribution groups named DG1, DG2, and DG3. DG3 is a member of DG2. 

You need to exclude from moderation the email messages sent from the members of DG3 to the members of DG1. The solution must maintain moderation for the email messages sent from all other users. 

What command should you run? (To answer, select the appropriate options in the answer area,) 



Answer: 



Q71. DRAG DROP 

You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. 

EX1 and EX2 are the members of a database availability group (DAG) named DAG1. DAG1 contains a database named DB1. DB1 is active on EX1. 

You deploy a new Exchange Server 2013 server named Ex3. 

You add EX3 as a member of DAG1. 

You need to add a copy of DB1 to EX3 by using an offline copy of the database. 

Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.) 


Answer: 



Q72. You need to recommend a solution to resolve the issue of the human resources department manager. 

What should you include in the recommendation? 

A. Run Set-ADServerSettings -ConfigurationDomainController dcl.proseware.com on all of the Exchange servers in the London site. 

B. Move the PDC emulator to the New York office. 

C. Modify the replication interval on the Active Directory site link. 

D. Schedule a task that runs the Update-AddressList command to run once per hour. 

Answer: C 


70-341 exam engine

Latest microsoft 70-341 dump:

Q73. HOTSPOT 

You need to identify which names must be used as the URLs of each virtual directory on the planned Exchange Server 2013 servers. 

Which names should you identify? 

To answer, configure the appropriate name for each server in the answer area. 


Answer: 



Q74. You need to create an exclusion for two helpdesk RBAC (Role Based Access Control) groups to not have access to managers. 

You will need to pick 3 powershell commands from the available choices 

A. New-ManagementRole, New-ManagementScope,Set-ManagementScope (Guessed) 

B. New-ManagementScope, RecipientRestrictionFilter ,New-ManagementRoleAssignment (Guessed) 

C. New-ManagementScope, New-ManagementRoleAssignment, CustomRecipientWriteScope (Guessed) 

D. Unsure of commands and correct answer 

Answer: C 


Q75. HOTSPOT

Your company has an Exchange Server 2013 organization named contoso.com. 

All users run Microsoft Outlook 2010 or Outlook 2013. 

The company recently acquired another company named A. Datum Corporation. All of the 

users at A. Datum run Linux-based computers and use a third-party IMAP client to access 

their email messages. 

You configure IMAP over SSL to use the external URL of mail.contoso.com. 

You need to publish the IMAP settings to Outlook Web App. 

What command should you run? (To answer, select the appropriate options in the answer 

area,) 



Answer: 



Q76. HOTSPOT

You have an Exchange Server 2013 organization that contains three servers. The servers are configured as shown in the following table. 


All inbound email messages from the Internet are routed through EX01. 

You plan to remove EX01 from the organization. 

You need to ensure that all of the functionalities of EX01 are transferred to EX02 and 

EX03. The solution must minimize administrative effort. 

Which functionality should you transfer to each server? (To answer, select the appropriate 

server for each functionality in the answer area.) 



Answer: 



Q77. You have an Exchange Server organization that contains three servers that have Exchange Server 2013 installed and one server that has Exchange Server 2010 installed. 

You create the custom RBAC roles shown in the following table. 


The Seattle help desk manages all of the users in an organizational unit (OU) named Seattle. The Miami help desk manages all of the users in an OU named Miami. The IT Administrators manage all of the users in the forest. 

You need to recommend which commands must be run to prevent only the members of both help desks from modifying the properties of users who have a department attribute value of Manager. 

Which three commands should you run? (Each correct answer presents part of the solution. Choose three.) 

A. new-managementscope "executive users exclusive scope" -recipientrestrictionfilter { department -eq "manager" } -exclusive –force 

B. new-managementroleassignment -name "managers" -securitygroup "managers" -role "mail recipients" -exclusiverecipientwritescope "executive users exclusive scope" 

C. new-roleassignmentpolicy -name "limited end user policy" -roles "mypersonalinformation". 

D. new-rolegroup -name "managers" -roles "mail recipients" -members admins 

E. new-rolegroup -name "help desk" -roles "mail recipients" -members admins 

Answer: A,B,D 


Q78. HOTSPOT

You have an Exchange Server 2013 organization that contains 10 mailbox servers. 

You have a custom workload management policy named App1Policy. App1Policy is applied to three Mailbox servers. 

You deploy a new Mailbox server named EX11. 

You need to ensure that App1Policy is applied to EX11. 

Which command should you run? (To answer, configure the appropriate options in the answer area.) 


Answer: 



Q79. You need to recommend which task is required to prepare Active Directory for the planned Exchange Server 2013 implementation. 

What should you recommend? 

A. On any domain controller in the Paris office, run setup.exe /preparead. 

B. On any domain controller in the Amsterdam office, run setup.exe /preparead. 

C. On any domain controller in the Paris office, run setup.exe /preparealldomains. 

D. On any domain controller in the Amsterdam office, run setup.exe /preparedomain. 

Answer: B 


Q80. DRAG DROP 

Your network contains an internal network and a perimeter network. 

You have an Exchange Server 2010 organization that contains an Edge Transport server named EX3. 

You plan to upgrade the organization to Exchange Server 2013. You plan to replace EX3 and its functionalities with a new server named EX6 that has Exchange Server 2013 installed. 

EX6 will be used to send all email messages to and receive all email messages from the Internet and to filter spam. 

You need to recommend which steps are required to install EX6. EX6 must have the least number of Exchange Server roles installed. 

Which three actions should you recommend performing on EX6 in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.) 


Answer: 




see more 70-341 dumps