It is more faster and easier to pass the HUAWEI H12-811_V1.0 exam by using Approved HUAWEI HCIA-Datacom V1.0 questuins and answers. Immediate access to the Up to the immediate present H12-811_V1.0 Exam and find the same core area H12-811_V1.0 questions with professionally verified answers, then PASS your exam with a high score now.
Online H12-811_V1.0 free questions and answers of New Version:
NEW QUESTION 1
What are the three sources for routers to obtain routing entries? ()*
- A. Aggregate routing
- B. Static routing
- C. Dynamic routing
- D. Direct route
Answer: BCD
NEW QUESTION 2
The static MAC. address table will not be lost after the system restarts ()
- A. True
- B. False
Answer: A
NEW QUESTION 3
What is the priority value of the direct route entry? ()
- A. 30
- B. 10
- C. 20
Answer: A
NEW QUESTION 4
The FIT AP can obtain the IP address of AC. through the DHCP Option to establish a CAPWAP tunnel. Which Option needs to be configured on the DHCP server for this? ()
- A. Option 82
- B. Option 10
- C. Option 43
- D. Option 55
Answer: A
NEW QUESTION 5
What kind of network equipment can host A and host B use to achieve communication?
- A. router
- B. Hub
- C. HUB
- D. Layer 2 switch
Answer: A
NEW QUESTION 6
The following description of static and dynamic routing is wrong ().
- A. Dynamic routing protocols take up more system resources than static routing protocols.
- B. After the link fails, the static route can automatically complete the network convergence.
- C. After the administrator deploys the dynamic routing protocol in the corporate network, later maintenance and expansion can be more convenient
- D. Static routing is easy to configure and easy to manage when applied in the enterprise
Answer: B
NEW QUESTION 7
After the administrator successfully logs in to the router through Telnet, it is found that the router's interface P address cannot be allocated, then the possible reasons are ()
- A. Telnet user level configuration
- B. False
- C. SNMP parameter configuration
- D. False
- E. Telnet user authentication mode configuration
- F. False
- G. The administrator uses the telnet terminal software to prohibit the corresponding operation
Answer: A
NEW QUESTION 8
In which working state of the port in the STP protocol can it be changed to the Forwarding state without going through other states? ()
- A. Listening
- B. Disabled
- C. Blocking
- D. Learning
Answer: D
NEW QUESTION 9
The role of the OSPF protocol is
- A. Pass routing information
- B. Transmit MAC information
- C. Pass ARP information
- D. No effect
Answer: A
NEW QUESTION 10
The network shown in the figure below. The administrator wants RTA to use a static router. Priority is given to sending data packets to RTB's LoopbackO interface through G0/0/1 port. At the same time, G0/0/2 is used as a backup. Then any configuration on RTA can be Realize this requirement? () (Single-choice question)
- A. ip route-static10.0.2.2255.255.255.25510.0.12.2Ip route-static10.0.2.2255.255.255.25510.0.21.2 preference 40
- B. ip route-static10.0.2.2255.255.255.25510.0.12.2Ip route-static10.0.2.2255.255.255.25510.0.21.2
- C. ip route-static10.0.2.2255.255.255.25510.0.12.2 preference 70 Ip route.-static10.0.2.2255.255.255.25510.0.21.2
- D. ip route-static10.0.2.2255.255.255.25510.0.12.2Ip route-static10.0.2.2255.255.255.25510.0.21.2 preference 70
Answer: D
NEW QUESTION 11
Which of the following advantages does the single-arm routing approach achieve inter-VLAN routing and intercommunication? ()
- A. Reduce the use of IP addresses
- B. Reduce the number of link connections
- C. Reduce routing table entries
Answer: C
NEW QUESTION 12
The network as shown in the figure. Which of the following configurations can realize that Host A cannot access the HTTP service of Host B. Host B cannot access the FTP service of Host A? () (Multiple Choice Questions)
- A. acl number 3000 Rule5DenyTep Source#Acl number 3001 Rule5 deny top source 100.0.13.0 0.0.0.255 source-port eq ftp destination#Interface GigabitEthernet0/0/1 Traffic-filter inbound acl 3000#Interface GigabitEthernet0/0/2 Traffic-filter inbound acl 3001#
- B. acl number 3000 Rule5Deny tcp source 100.0.13.0 0.0.0.255 destination 100.0.12.00.0.0.255 Destination eq www#Acl number 3001 Rule5 deny tcp source 100.0.12.0 0.0.0.255 destination 100.0.13.00.0.0.255 Destination eq ftp#Interface GigabitEthernet0/0/1Traffic-filter inbound acl 3000#Interface GigabitEthernet0/0/2 Traffic-filter inbound acl 3001#
- C. acl number 3000Rule 5 deny tcp source 100.0.12.0 0.0.0.255 source-port eq www destination Rule5 deny tcp source 100.0.13.0 0.0.0.255 source-port eq ftp destination#Interface GigabitEthernet0/0/1 Traffic-filter inbound acl 3000#Interface GigabitEthernet0/0/2 Traffic-filter inbound acl 3001#
- D. acl number 3000 Rule5Deny tcp source 100.0.13.0 0.0.0.255 destination 100.0.12.00.0.0.255 Destination eq www#Acl number 3001 Rule5 deny tcp source 100.0.12.0 0.0.0.255 destination 100.0.13.00.0.0.255Destination eq ftp#Interface GigabitEthernet0/0/1 Traffic-filter inbound acl 3000#Interface GigabitEthernet0/0/2 Traffic-filter inbound acl 3001
Answer: BD
NEW QUESTION 13
VLAN4095 cannot be created on Huawei switches, and VLAN1 cannot be created ()
- A. True
- B. False
Answer: A
NEW QUESTION 14
Which of the following OSCan PF protocol packets ensure the reliability of LSA update? ()
- A. LSACK
- B. DD
- C. LSU
- D. LSR
Answer: A
NEW QUESTION 15
Network equipment running the SNMP protocol can take the initiative to report alarm information so that network administrators can find faults in time. ()
- A. True
- B. False
Answer: A
NEW QUESTION 16
The basic header length of IPv6 packets is a fixed value ()
- A. True
- B. False
Answer: A
NEW QUESTION 17
To ensure that the same data flow is forwarded on the same physical link, which load sharing method does the Eth-Trunk adopt? ()
- A. Flow-based load sharing
- B. Packet-based load sharing
- C. Load sharing based on application layer information
- D. Load sharing based on data packet inbound interface
Answer: A
NEW QUESTION 18
The following protocols are China's link state routing protocol
- A. OSPF
- B. Direct
- C. Static
Answer: B
NEW QUESTION 19
The broadcast address is a special address that all the host bits in the network address are set to, and it can also be used as a host address. ()
- A. True
- B. False
Answer: B
NEW QUESTION 20
Take effect immediately after the Router ID of the OSPF process is modified ()
- A. True
- B. False
Answer: B
NEW QUESTION 21
......
100% Valid and Newest Version H12-811_V1.0 Questions & Answers shared by Thedumpscentre.com, Get Full Dumps HERE: https://www.thedumpscentre.com/H12-811_V1.0-dumps/ (New 730 Q&As)
