How to pass Juniper JN0-332 Real Exam in 24 Hours [exam answers 221-230]

The examinees which read the Pass4sure Juniper JN0-332 dumps are good results of extremely qualified professors, dwelling an excellent existence. Pass4sure may be dedicated to help make your long term protected and commence your own Juniper JN0-332 uniper Networks Certified Internet Specialist, SEC (JNCIS-SEC) test products through the latest updated Pass4sure tests JN0-332 test powerplant. The dreams should come accurate through start your own JN0-332 vce regarding uniper Networks Certified Internet Specialist, SEC (JNCIS-SEC) test via Pass4sure Juniper examine guides just. You wont in a position to shine your talent within the very first attempt of JN0-332 test if you use the additional walkway than Juniper. Juniper Juniper JN0-332 pdf provides you with brilliance therefore making you enough confident in your entire existence.

2021 Jun JN0-332 rapidshare

Q221. Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH? (Choose three.) 

A. data integrity 

B. data confidentiality 

C. data authentication 

D. outer IP header confidentiality 

E. outer IP header authentication 

Answer: ACE 

Q222. Which two statements describe full file-based antivirus protection? (Choose two.) 

A. By default, the signature database is updated every 60 minutes. 

B. By default, the signature database is updated once daily. 

C. The signature database targets only critical viruses and malware. 

D. The signature database can detect polymorphic virus types. 

Answer: AD

Q223. Click the Exhibit button. 

[edit schedulers] 

user@host# show 

scheduler now { 

monday all-day; 

tuesday exclude; 

wednesday { 

start-time 07:00:00 stop-time 18:00:00; 

thursday { 

start-time 07:00:00 stop-time 18:00:00; 


[edit security policies from-zone Private to-zone External] 

user@host# show 

policy allowTransit { 

match { 

source-address PrivateHosts; 

destination-address ExtServers; 

application ExtApps; 

then { 

permit { 

tunnel { 

ipsec-vpn myTunnel; 


scheduler-name now; 

Based on the configuration shown in the exhibit, what are the actions of the security policy? 

A. The policy will always permit transit packets and use the IPsec VPN myTunnel. 

B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel. 

C. The policy will permit transit packets and use the IPsecVPN myTunnel all day Monday andWednesday 7am to 6pm, and Thursday 7am to 6pm. 

D. The policy will always permit transit packets, but will onlyuse the IPsec VPN myTunnel allday Monday and Wednesday 7am to 6pm, and Thursday 7am to 6pm. 

Answer: C 

Q224. -- Exhibit – 

-- Exhibit --

Click the Exhibit button. 

You are troubleshooting an IPsec VPN connection between a local SRX Series device using IP address and a remote SRX device using IP address A VPN connection cannot be established. Referring to the exhibit, you examine the kmd log file. 

What is the problem? 

A. The Phase 2 proposal is invalid. 

B. The Phase 1 proposal is invalid. 

C. The Phase 1 gateway is invalid. 

D. The Phase 2 gateway is invalid. 

Answer: B 

Q225. What is the proper sequence of evaluation for the SurfControl integrated Web filter solution? 

A. whitelists, blacklists, SurfControl categories 

B. blacklists, whitelists, SurfControl categories 

C. SurfControl categories, whitelists, blacklists 

D. SurfControl categories, blacklists, whitelists 

Answer: B 

JN0-332  test preparation

Renewal JN0-332 exam price:

Q226. Which two configuration elements are required for a route-based VPN? (Choose two.) 

A. secure tunnel interface 

B. security policy to permit the IKE traffic 

C. a route for the tunneled transit traffic 

D. tunnel policy for transit traffic referencing the IPsec VPN 

Answer: AC 

Q227. -- Exhibit --user@host> show security ike security-associations Index Remote Address State Initiator cookie Responder cookie Mode 

8 UP 3a895f8a9f620218 9040753e66d700bb Main 

user@host> show security ipsec security-associations Total active tunnels: 0 

user@host> show route inet.0: 7 destinations, 7 routes (6 active, 0 holddown, 1 hidden) 

+ = Active Route, - = Last Active, * = Both *[Static/5] 00:00:25 > to via ge-0/0/0.0 *[Direct/0] 00:00:25 > via ge-0/0/0.0 *[Local/0] 00:00:25 Local via ge-0/0/0.0 *[Direct/0] 00:06:06 > via st0.0 *[Local/0] 00:06:06 Local via st0.0 *[Direct/0] 00:06:06 > via ge-0/0/1.0 *[Local/0] 00:06:06 Local via ge-0/0/1.0 *[Static/5] 00:00:25 > to via ge-0/0/0.0 

user@host> show security policies Default policy: deny-all From zone: trust, To zone: vpn Policy: permit-all, State: enabled, Index: 4, Scope Policy: 0, Sequence number: 1 Source addresses: any Destination addresses: any Applications: any Action: permit -- Exhibit --

Click the Exhibit button. 

You have created an IPsec VPN on an SRX Series device. You believe the tunnel is configured correctly, but traffic from a host with the IP address of cannot reach a remote device over the tunnel with an IP address of The ge-0/0/1.0 interface is in the trust zone and the st0.0 interface is in the vpn zone. The output of four show commands is shown in the exhibit. 

What is the configuration problem with the tunnel? 

A. Only one IKE tunnel exists so there is no path for return IKE traffic. You need to allow IKE inbound on interface ge-0/0/0.0. 

B. Because there are no IPsec security associations, the problem is in the IPsec proposal settings. 

C. The static route created to reach the remote host is incorrect. 

D. The VPN settings are correct, the traffic is being blocked by a security policy. 

Answer: C 

Q228. Which three firewall user authentication objects can be referenced in a security policy? (Choose three.) 

A. access profile 

B. client group 

C. client 

D. default profile 

E. external 

Answer: ABC 

Q229. You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone. From the [edit] hierarchy, which command do you use to configure this assignment? 

A. set security zones management interfaces ge-0/0/0.0 

B. set zones functional-zone management interfaces ge-0/0/0.0 

C. set security zones functional-zone management interfaces ge-0/0/0.0 

D. set security zones functional-zone out-of-band interfaces ge-0/0/0.0 

Answer: C 

Q230. Which zone type can be specified in a policy? 

A. security 

B. functional 

C. user 

D. system 

Answer: A 

see more JN0-332 dumps