how to use cisco 200 125

It is more faster and easier to pass the Cisco ccna 200 125 book exam by using Top Quality Cisco CCNA Cisco Certified Network Associate CCNA (v3.0) questuins and answers. Immediate access to the Up to date ccna 200 125 torrent Exam and find the same core area 200 125 ccna v3 0 questions with professionally verified answers, then PASS your exam with a high score now.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 200-125 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 200-125 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/200-125-exam-dumps.html

P.S. Top Quality 200-125 free samples are available on Google Drive, GET MORE: https://drive.google.com/open?id=1qSmqe9lmg23sR5XECqlhobCqcIIdpdHn


New Cisco 200-125 Exam Dumps Collection (Question 2 - Question 11)

Question No: 2

A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? (Choose three.)

A. informational

B. emergency

C. warning

D. critical

E. debug

F. error

Answer: B,D,F

Explanation:

The Message Logging is divided into 8 levels as listed below:

Level Keyword Description 0

emergencies System is unusable 1

alerts

Immediate action is needed 2

critical

Critical conditions exist 3

errors

Error conditions exist

4

warnings

Warning conditions exist 5

notification

Normal, but significant, conditions exist 6

informational Informational messages 7

debugging Debugging messages

If you specify a level with the u201cloggingtrap levelu201d command, that level and all the higher levels will be logged. For example, by using the u201clogging trap 3 command, all the logging of emergencies, alerts, critical, and errors, will be logged.


Question No: 3

Which command is used to enable CHAP authentication, with PAP as the fallback method, on a serial interface?

A. Router(config-if)# ppp authentication chap fallback ppp

B. Router(config-if)# ppp authentication chap pap

C. Router(config-if)# authentication ppp chap fallback ppp

D. Router(config-if)# authentication ppp chap pap

Answer: B

Explanation:

This command tells the router first to use CHAP and then go to PAP if CHAP isn't available.


Question No: 4

Refer to the exhibit.

Which two statements are true of the interfaces on Switch1? (Choose two.)

A. Multiple devices are connected directly to FastEthernet0/1.

B. A hub is connected directly to FastEthernet0/5.

C. FastEthernet0/1 is connected to a host with multiple network interface cards.

D. FastEthernet0/5 has statically assigned MAC addresses.

E. FastEthernet0/1 is configured as a trunk link.

F. Interface FastEthernet0/2 has been disabled.

Answer: B,E

Explanation:

Carefully observe the information given after command show. Fa0/1 is connected to Switch2, seven MAC addresses correspond to Fa0/1, and these MAC are in different VLAN. From this we know that Fa0/1 is the trunk interface.

From the information given by show cdp neighbors we find that there is no Fa0/5 in CDP neighbor. However, F0/5 corresponds to two MAC addresses in the same VLAN. Thus we know that Fa0/5 is connected to a Hub.

Based on the output shown, there are multiple MAC addresses from different VLANs attached to the FastEthernet 0/1 interface. Only trunks are able to pass information from devices in multiple VLANs.


Question No: 5

VLAN 3 is not yet configured on your switch. What happens if you set the switchport access vlan 3 command in interface configuration mode?

A. The command is rejected.

B. The port turns amber.

C. The command is accepted and the respective VLAN is added to vlan.dat.

D. The command is accepted and you must configure the VLAN manually.

Answer: C

Explanation:

The u201cswitchport access vlan 3u201d will put that interface as belonging to VLAN 3 while also updated the VLAN database automatically to include VLAN 3.


Question No: 6

What occurs on a Frame Relay network when the CIR is exceeded?

A. All TCP traffic is marked discard eligible.

B. All UDP traffic is marked discard eligible and a BECN is sent.

C. All TCP traffic is marked discard eligible and a BECN is sent.

D. All traffic exceeding the CIR is marked discard eligible.

Answer: D

Explanation:

Committed information rate (CIR): The minimum guaranteed data transfer rate agreed to by the Frame Relay switch. Frames that are sent in excess of the CIR are marked as discard eligible (DE) which means they can be dropped if the congestion occurs within the Frame Relay network.

Note: In the Frame Relay frame format, there is a bit called Discard eligible (DE) bit that is used to identify frames that are first to be dropped when the CIR is exceeded.


Question No: 7

Which two tasks does the Dynamic Host Configuration Protocol perform? (Choose two.)

A. Set the IP gateway to be used by the network.

B. Perform host discovery used DHCPDISCOVER message.

C. Configure IP address parameters from DHCP server to a host.

D. Provide an easy management of layer 3 devices.

E. Monitor IP performance using the DHCP server.

F. Assign and renew IP address from the default pool.

Answer: C,F

Explanation:

The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to configure devices that are connected to a network (known as hosts) so they can communicate on that network using the Internet Protocol (IP). It involves clients and a server operating in a client-server model. DHCP servers assigns IP addresses from a pool of addresses and also assigns other parameters such as DNS and default gateways to hosts.


Question No: 8

What are two characteristics of Frame Relay point-to-point subinterfaces? (Choose two.)

A. They create split-horizon issues.

B. They require a unique subnet within a routing domain.

C. They emulate leased lines.

D. They are ideal for full-mesh topologies.

E. They require the use of NBMA options when using OSPF.

Answer: B,C

Explanation:

Subinterfaces are used for point to point frame relay connections, emulating virtual point to point leased lines. Each subinterface requires a unique IP address/subnet. Remember, you cannot assign multiple interfaces in a router that belong to the same IP subnet.


Question No: 9

Refer to the exhibit.

The company uses EIGRP as the routing protocol. What path will packets take from a host on the 192.168.10.192/26 network to a host on the LAN attached to router R1?

A. The path of the packets will be R3 to R2 to R1.

B. The path of the packets will be R3 to R1 to R2.

C. The path of the packets will be both R3 to R2 to R1 AND R3 to R1.

D. The path of the packets will be R3 to R1.

Answer: D

Explanation:

Host on the LAN attached to router R1 belongs to 192.168.10.64/26 subnet. From the output of the routing table of R3 we learn this network can be reach via 192.168.10.9, which is an IP address in 192.168.10.8/30 network (the network between R1 & R3) -> packets destined for 192.168.10.64 will be routed from R3 -> R1 -> LAN on R1.


Question No: 10

Refer to the exhibit.

According to the routing table, where will the router send a packet destined for 10.1.5.65?

A. 10.1.1.2

B. 10.1.2.2

C. 10.1.3.3

D. 10.1.4.4

Answer: C

Explanation:

The destination IP address 10.1.5.65 belongs to 10.1.5.64/28, 10.1.5.64/29 & 10.1.5.64/27 subnets but the u201clongest prefix matchu201d algorithm will choose the most specific subnet mask

-> the prefix u201c/29 will be chosen to route the packet. Therefore the next-hop should be

10.1.3.3 ->.

Topic 8, WAN Technologies

739.A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?

A. Main(config)# interface serial 0/0

Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# no shut

B. Main(config)# interface serial 0/0

Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# encapsulation ppp

Main(config-if)# no shut

C. Main(config)# interface serial 0/0

Main(config-if)# ip address 172.16.1.1 255.255.255.252 Main(config-if)# encapsulation frame-relay

Main(config-if)# authentication chap Main(config-if)# no shut

D. Main(config)# interface serial 0/0

Main(config-if)#ip address 172.16.1.1 255.255.255.252 Main(config-if)#encapsulation ietf

Main(config-if)# no shut


Question No: 11

Refer to the exhibit.

Which WAN protocol is being used?

A. ATM

B. HDLC

C. Frame Relay

D. PPP

Answer: C

Explanation:

This question is to examine the show int command.

According to the information provided in the exhibit, we can know that the data link protocol used in this network is the Frame Relay protocol.

u201cLMI enq sentu2026u201d


P.S. Easily pass 200-125 Exam with Examcollectionplus Top Quality Dumps & pdf vce, Try Free: https://www.examcollectionplus.net/vce-200-125/ (889 New Questions)