It is impossible to pass Cisco 642-980 exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Cisco 642-980 practice questions. You will get a surprising result by our Improve Troubleshooting Cisco Data Center Unified Fabric practice guides.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 642-980 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 642-980 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/642-980-exam-dumps.html
Q11. Refer to the output.
feature otv
otv site-vlan 2
otv site-identifier 256
!
interface ethernet 2/0
ip address 192.0.2.1/24
ip igmp version 3
!
interface ethernet 2/1
ip address 192.0.2.2/24
ip igmp version 3
!
interface Overlay1
otv control-group 239.1.1.1
otv join-interface ethernet 2/0
otv extend-vlan 3-100
!
interface Overlay2
otv control-group 239.1.1.1
otv join-interface ethernet 2/1
otv extend-vlan 101-115
Which command best represents where the control plane configurations are applied?
A. switch(config-if-overlay)# otv isis hello-interval 30
B. switch(config-if)# otv isis hello-interval 30
C. switch(config-vlan)# otv isis hello-interval 30
D. switch(config)# otv isis hello-interval 30
Answer: A
Q12. Refer to the exhibit.
Customer encounters the problem as shown in the exhibit. What is the cause of the problem?
A. No server was requested or received by the FLOGI database.
B. One external link must be up for server interface to be up.
C. Multiple external links must be up for the server to come up.
D. Internal links are down and must be up for the server interface to be up.
Answer: A
Q13. Which three commands will show all the MAC addresses learned from remote sites in an OTV overlay? (Choose three.)
A. show otv arp-nd-cache
B. show otv route overlay
C. show otv vlan
D. show ip arp
E. show mac address-table
F. show otv site
Answer: ABE
Q14. Which statement is true regarding the admin VDC?
A. All licensed features and feature sets must be enabled from the admin VDC.
B. Fabric extenders connectedto the admin VDC must be statically pinned.
C. Only the mgmt 0 interface is allocated to the admin VDC.
D. All interfaces other than mgmt 0 are allocated to the default VDC.
E. The admin context can only be created on Supervisor 2/2E.
F. The admin VDC is a new feature in Cisco NX-OS version 6.0.
Answer: C
Q15. On a Cisco Nexus 5500 Series Switch, the VFC is stuck in the initializing state. Which QoS statements must be configured for FCoE to operate?
A. system qos
service-policy type qos input fcoe-default-in-policy
service-policy type queuing input fcoe-default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type network-qos fcoe-default-nq-policy
B. system qos
service-policy type qos input fcoe-default-in-policy
service-policy type queuing input fcoe-default-in-policy
service-policy type qos input default-in-policy
service-policy type network-qos default-nq-policy
C. system qos
service-policy type qos input default-in-policy
service-policy type queuing input default-in-policy
service-policy type queuing output default-out-policy
service-policy type network-qos default-nq-policy
D. system qos
service-policy type qos input default-in-policy
service-policy type queuing input default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type network-qos fcoe-default-nq-policy
Answer: A
Q16. Refer to the exhibit.
A customer is having a problem with NPV. Which of these is the cause of the problem?
A. No server was requested or received by the FLOGI database.
B. One external link must be up for server interface to be up.
C. Multiple external links must be up for the server to come up.
D. Internal links are down and must be up for the server interface to be up.
Answer: B
Q17. It has been determined that unknown unicast, multicast, and broadcasttraffic is not correctly being switched through either Nexus 7010 switch. Whichstatement best describes the cause of this issue?
A. No VLANs are allowed across the vPC peer link.
B. The MST STP is not enabled on either switch.
C. The default VLAN is inactive.
D. VTP is not configured to handle this type of traffic.
Answer: B
Explanation:
The MST STP is not enabled on either switch From both switches the “show spanning-tree mst” command show that the switch is not in MST mode.
Q18. Which tools can assist in the troubleshooting of FC-0 issues? (Choose three.)
A. FC analyzer
B. SPAN
C. Device Manager
D. show interface fc1/1 optical-power-budget
E. PAA
F. a portable protocol analyzer
Answer: ACF
Q19. When using a Cisco Nexus 5500 and Cisco Nexus 7000 Series Switch, how can a port channel interface be configured?
A. Layer 3 interface
B. Layer 3 interface in non-admin VDC only
C. Layer 3 interface in admin VDC only
D. Layer 3 interface in VDC 1 only
Answer: A
Q20. Which command would you use to check the status of your configuration synchronization peer?
A. N5K2# show switch-profile peer
B. N5K2# show config-sync peer
C. N5K2# show synch peer
D. N5K2# show peer status
E. N5K2# show switch peer
Answer: A
